shopping cart empty
voiceoverip's Product Reviews
Sort:
Authentic Innokin iClear 30s Dual Coil Tank (3ml)
Authentic Innokin iClear 30s Dual Coil Tank (3ml)

Avatar
voiceoverip
Member

VERIFIED OWNER
  • JoinedMar 2013
  • Posts 1750
  • Reviews 91
  • Kudos837
Overall   (4.2)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Plug and play Decent vapor production Cheap to run
CONS
Polycarbonate tank (BPA) Small tank
I've been vaping for 20 months and got tired of building and maintaining my attys (Genesis, RDA, etc.) so I went the carto way, the holy grail then was Boge cartos with a tank, delivering consistent vaping, good taste and up to 2 weeks use without maintenance. The Iclear 30s does does exactly that in a neat package where replacing the coil head is even easier and doesn't require priming like cartos did, vapor production on a VW mod is decent and flavour is on par with the Boge cartos if not better. Vapor is warm which seems normal from a top coil setup, I would not pick this atty for minty or fruit tastes as I prefer these in cool vapor. Filling the 30s is easy too, just unsrew the top and fill directly with the bottle, no need for needles or other things. Downsides are the polycarbonate tank (BPA) and the fairly small amount of juice the tank will take. On a Zmax, I find that the vapor production is a bit slow to start compared to the Boge's, the dual coils seem to take longer to heat up. I get burned taste over 15 watts and prefer these around 9-10W. Considering you can get 4-5 weeks out of one coil head if you boil/dry burn them, they are really cheap to run. Good buy!
Reviewed on Was this review helpful to you? Yes / No
Aqua V2 Styled RDA Rebuildable Dripping Atomizer
Aqua V2 Styled RDA Rebuildable Dripping Atomizer

Avatar
voiceoverip
Member

VERIFIED OWNER
  • JoinedMar 2013
  • Posts 1750
  • Reviews 91
  • Kudos837
Overall   (4.5)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Great vape Easy to build Quality
CONS
filling pure VG PMMA tank
My second one, very nice clone, no flaws I could detect. I only hate it with 100% VG, wicking is good but filling gets messy, I'll have to drill one of the tank holes out. Other than that and the fact that it doesn't have a glass tank, it's a great atty.
Reviewed on Was this review helpful to you? Yes / No
2-in-1 Combo Tester (Ohm Meter + Volt Meter) for E-Cigarettes
2-in-1 Combo Tester (Ohm Meter + Volt Meter) for E-Cigarettes

Avatar
voiceoverip
Member

VERIFIED OWNER
  • JoinedMar 2013
  • Posts 1750
  • Reviews 91
  • Kudos837
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Seems accurate Huge display USB charging 1A charger
CONS
the price?
Not the cheapest but accurate when comparing to my other devices. Nice finish, manual, charging LED that goes green when fully charged and auto-off after 3 minutes. I can't fault it so far. The included 1A charger is a bonus if you're in the US or have an adapter, and a decent cable is supplied too. I didn't measure voltage yet ... and enjoy the Western Digital pouch :)
Reviewed on Was this review helpful to you? Yes / No
Veritas Styled Rebuildable Dripping Atomizer
Veritas Styled Rebuildable Dripping Atomizer

Avatar
voiceoverip
Member

VERIFIED OWNER
  • JoinedMar 2013
  • Posts 1750
  • Reviews 91
  • Kudos837
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
No leaks Decent machining Good vape
CONS
Not the easiest to build Drip tip No box, no spares
The drip tip is interesting, otherwise this clone is well made and performs just like it should. No leaks if you don't overdrip, top nuts are good, lateral screws don't like to keep wire trapped. The middle insulator is too long and can be seen through the airhole but doesn't seem to bother anything. Positive pin is screwed so tight it is impossible for me to get off but it protrudes and there is no problem on an SMPL or 4nine mod. Top cap oring tightness is good and vape is very good if you build it right. The real feature is the leak resistance, otherwise just another decently made dripper with a medium to high airflow at a good price.
Reviewed on Was this review helpful to you? Yes / No

Avatar
voiceoverip
Member

VERIFIED OWNER
  • JoinedMar 2013
  • Posts 1750
  • Reviews 91
  • Kudos837
Overall   (4.5)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Adjustable 510 Good base
CONS
Plastic tank is flimsy
I bought this togther with a large Kayfun tank SKU 1787301, some trouble with the orings, machining traces on the inside but looks OK on the outside, threads all work. No bad taste after a dip in hot water with dishwashing soap and a quick bath in 10% vinegar water. The fill hole works and is usuable with a pointy nozzle, doesn't require needles, which is better than the stainless V4 where the fill hole is covered by the chimney. The plastic sections of the tank seem flimsy but I didn't use them, just needed the base and chimney. For the price a clear 5 stars.
Reviewed on Was this review helpful to you? Yes / No