shopping cart empty
skank's Product Reviews
Sort:

skank
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 242
  • Reviews 13
  • Kudos222
Overall   (4.7)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Great vapour production Easy build Holds loads of liquid Great overall quality Massive
CONS
Massive Some rough edges needed work
This is my first review, I felt compelled to write one for this RBA as it was such a surprise to me. I expected it to be decent. I didn't expect it to become my favourite RBA. When I first got it out of the package it looked very well made and finished. Closer inspection revealed a few rough and sharp edges, so I got out the wet&dry and smoothed them off. Next I gave it a thorough clean. Put back together it really looks like a high end piece of kit. My first build was a standard coil using the included kanthal/nichrome wire. This came out at 3ohms. It was terrible. So I tried a 0.32mm (28AWG) microcoil at 1.5ohms instead, with cotton wick, on my SVD at 11 watts. This was really quite something, using the airflow screw, it was a relatively tight draw, around Protank level, but the flavour was very good and vapour better than a Protank. I removed the screw entirely and the FeV really came to life, really just like a dripper, especially now I could crank the SVD up to 15 watts. tons of flavour and dense vapour. Now it doesn't compare to my dual 3mm holed, dual coiled 0.3ohm cloud generator on my mech for vapour production, but that's not really what this is about. It's an all day device and I myself don't really want to bring a weather system with me everywhere all day long. It beats my Kayfun hands down. I cannot really say much more than that in praise of this RBA. Holds enough juice for a day too, no leaks, no dry hits. I also added the clear window section as I am using a cotton wick through the coil and don't want to dry burn by accident. The window looks nice, but is very slightly crooked, it is almost imperceptible but the tank section is like half a degree tilted, definitely not cross threaded, and certainly something I don't mind. Not this FeV's fault though, as it is dead straight with the metal tank section. Lastly, one of the pros is also a con. It's good that it's big enough to hold a ton of juice, but it's also bad that it's that big. On my SVD in 18650 mode it is 22cm (8 3/4") long! it looks like a weapon. For the money, this is a must have. I really am astounded this isn't more popular than it is.
Reviewed on Was this review helpful to you? Yes / No

skank
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 242
  • Reviews 13
  • Kudos222
Overall   (0.7)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Light weight.
CONS
Hole in bottom leaks juice Bottle poor quality, leaks juice Spring bottom contact. Probably made of Kanthal, it gets that hot. Sharp edges on door and window. Door wobbles with battery in.
Received this very quickly with Fasttech's usual excellent service and e-packet, super excited. Then I opened it... This is one of the worst clones I have bought in a long, long time. Reminds me of the early days of clones, years ago. There is really no redeeming feature. To make this an acceptable device would require pretty much replacing everything. Even the box would need sanding to finish it. If it was 1/3 the price it might just be acceptable, but this is expensive compared to the Frankenskull and Boxer clones. I expected better.
Reviewed on Was this review helpful to you? Yes / No
Variable Frequency Massage Vibrator Sex Toy
Variable Frequency Massage Vibrator Sex Toy

skank
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 242
  • Reviews 13
  • Kudos222
Overall   (4.5)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Power Price Power
CONS
Loud!
The missus likes this one, it does the job fast. Is a bit noisy, also only has 2 speeds (wow that's powerful and omgwtf) , the rest of the settings are the typical useless vibration patterns. Good deep vibrations though, only needed to use low speed.
Reviewed on Was this review helpful to you? Yes / No
Protective Silicone Sleeve Case for eVic VTC Mini 60W TC VW Mod
Protective Silicone Sleeve Case for eVic VTC Mini 60W TC VW Mod

skank
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 242
  • Reviews 13
  • Kudos222
Overall   (4.7)
› Quality
› Value
PROS
Covers all the bits you want covered
CONS
Slightly cheap looking
Fits perfect, protects from knocks, cheap. If you want a black silicone sleeve for the VTC mini, this is it. Nothing more to say.
Reviewed on Was this review helpful to you? Yes / No

skank
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 242
  • Reviews 13
  • Kudos222
Overall   (5.0)
› Quality
› Value
PROS
+ Easy to build single or dual coil + Lots of airflow + Very well made + Great flavour
CONS
- Some juice underneath after extended use.
This is a really good clone of one of the best drippers I ever used. Comes with all the accessories you need for single or dual coil. Have built it with 22awg Kanthal and Nichrome, fused Clapton SS and Kanthal, all perform great and easy to build. Easy to adjust airflow that stays where you leave it. Decent juice capacity, though not huge due to chunky air tubes, nonetheless is easy to redrip. The flavour on this is very good indeed. Flawless machining round out an excellent quality dripper that is one of my favourites.
Reviewed on Was this review helpful to you? Yes / No