shopping cart empty
ppeeble's Product Reviews
Sort:

Avatar
ppeeble
Member

VERIFIED OWNER
  • JoinedMar 2013
  • Posts 959
  • Reviews 354
  • Kudos918
Overall   (4.5)
› Quality
› Value
9 of 11 people found the following review helpful
These really are pushing the limits on the capacity an 18650 battery will hold. They would be a must buy IF they fitted any of the tube mods for sale here. Unfortunately these are not 18650 batteries. They are 69mm long and the diameter is a tad over 18mm making them a very tight fit in a tube mod. So tight that it would be very easy to damage the outer wrap when jamming them in. Be warned.
Reviewed on Was this review helpful to you? Yes / No
Authentic Aleader Orbit 80W TC VW APV Box Mod
Authentic Aleader Orbit 80W TC VW APV Box Mod

Avatar
ppeeble
Member

VERIFIED OWNER
  • JoinedMar 2013
  • Posts 959
  • Reviews 354
  • Kudos918
Overall   (3.7)
› Quality
› Value
3 of 3 people found the following review helpful
Oooops. After trying stainless steel in TC this is underwhelming to say the least. For a 0.4ohm coil i have to set this at max temp and 80w to get any sort of vape out of it. Any temp below 572f hardly warms the coil. It's still lovely looking but this one is for power vaping only unless i've recieved a duffer.
Reviewed on Was this review helpful to you? Yes / No

Avatar
ppeeble
Member

VERIFIED OWNER
  • JoinedMar 2013
  • Posts 959
  • Reviews 354
  • Kudos918
Overall   (5.0)
› Quality
› Value
3 of 4 people found the following review helpful
PROS
Well machined. Leak free. Flavour better than a regular Kayfun. Liquid control. Air control....
CONS
Needs a good wash.
Excellent quality atomiser. Everything screws together well and the threads are clean. Simple to build. The airflow control works but is a pain to adjust, unscrewing the attie and then the base plate to adjust the airflow can get tiresome. After a week of use mine have not leaked a drop or produced a dry hit. Once you figure out the best place for the juice control with your liquid then you're good to go. The lack of a logo to use as a base point when unscrewing the liquid control could be an issue. Once done a couple of times it is easy to estimate how far to back off the chimney. Re-filling is quick and simple. Overall this is the best MTL attie in terms of performance that i own. The Kayfun Lite has just lost it's crown. Unfortunately mine came reeking of oil and needed a good scrub with detergent.
Reviewed on Was this review helpful to you? Yes / No

Avatar
ppeeble
Member

VERIFIED OWNER
  • JoinedMar 2013
  • Posts 959
  • Reviews 354
  • Kudos918
Overall   (4.7)
› Quality
› Value
3 of 4 people found the following review helpful
All the threads on this are well cut and easy to use. The juice channels are big and well cut. The overall look is excellent. No leaks or dry hits after a full days use. Although the air hole looks very small there appears to be some air coming through the bottom grub screw. No problems for me with airflow and it seems slightly airier than the regular kayfun lite. Niggles are the screws which are the usual rounded heads and need changing for a good quality cheese head screw and it needs a good soak before use. My drip tip came without o rings. Loads of spares included in the box but no drip tip o rings unfortunately. Recommended.
Reviewed on Was this review helpful to you? Yes / No
Unknown Rebuildalbe Atomizer (4.5ml)
Unknown Rebuildalbe Atomizer (4.5ml)

Avatar
ppeeble
Member

VERIFIED OWNER
  • JoinedMar 2013
  • Posts 959
  • Reviews 354
  • Kudos918
Overall   (5.0)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
No leaks. No dry hits. No gurgles. Well made. Well finished. Lovely vapour with adjustable air and juice control.
CONS
No spare tank. Tank is handed, must be fitted the right way up and no markings make it easy to get wrong. Liquid flow adjustment via dedicated drip tip.
This is working for me as well (if not better than) any of my Taifuns or Kayfuns. Cotton wick in a 1.6ohm .32mm 9 turn micro coil is excellent. Good flavour and vapour. No dry hits, no leaking, no gurgling. Well made, well finished, all steel. Air flow is adjusted with an allen grub screw and you don't get a key. Juice control is adjusted by turning the drip tip which is VERY firm once assembled. You will definitely need a drill bit or similar to adjust it. The PMMA tank is very thick and will take a bit of abuse. Please note that the tank is handed. There are more threads at one end than the other. The side with more threads screws into the base. Overall very pleased.
Reviewed on Was this review helpful to you? Yes / No