shopping cart empty
philipvdb's Product Reviews
Sort:

Avatar
philipvdb
Member

VERIFIED OWNER
  • JoinedJun 2016
  • Posts 2477
  • Reviews 29
  • Kudos4104
Overall   (3.2)
› Quality
› Value
0 of 1 people found the following review helpful
PROS
solid build easy to build nice clouds airflow
CONS
510 threading/connection
The only problem I have is the 510 threading. This rda doesn't sit 100% straight on my mods. It only sits straight on my centipede which doesn't have an pin and connects immediate to the battery. I don't wont to mess up my 510 connection on my mods so I only use it with my centipede. But gives nice clouds and for the rest a solid build. Worth the money.
Reviewed on Was this review helpful to you? Yes / No
Kuken Tech Kanthal A1 Heating Wire for RBA Atomizer
Kuken Tech Kanthal A1 Heating Wire for RBA Atomizer

Avatar
philipvdb
Member

VERIFIED OWNER
  • JoinedJun 2016
  • Posts 2477
  • Reviews 29
  • Kudos4104
Overall   (5.0)
› Quality
› Value
1 of 3 people found the following review helpful
You can make coils with it and it only costs 3.45$ for 100ft. That's it.
Reviewed on Was this review helpful to you? Yes / No

Avatar
philipvdb
Member

VERIFIED OWNER
  • JoinedJun 2016
  • Posts 2477
  • Reviews 29
  • Kudos4104
Overall   (4.0)
› Quality
› Value
0 of 1 people found the following review helpful
PROS
looks airflow
CONS
filling hole very tiny hex screws
good rta which produces very nice clouds. The hex screws and key are very tiny. Came very clean, quick wash and ready to go. Easy building but wicking is a little tricky. I first build, then pull the cotton through the holes and then assemble everything. The coil blocks the filling hole so you need a needle bottle to fill. Good price and quality.
Reviewed on Was this review helpful to you? Yes / No

Avatar
philipvdb
Member

VERIFIED OWNER
  • JoinedJun 2016
  • Posts 2477
  • Reviews 29
  • Kudos4104
Overall   (4.5)
› Quality
› Value
0 of 2 people found the following review helpful
PROS
Price Looks Airflow Squonker(optional) Clouds
CONS
Thin Screws seems fragile Driptip (optional) No allen key
This is a good rda for the price. It feels rather thin and screws seem fragile. Don't care about no allen key for the bf screw because i'm not into squonking. Deck is huge and airflow is ok. Decent juice well. Looks ok but the driptip is huuuge. Haven't been able to remove it and not gonna insist because i feel like i could damage the tank if i put too much force on it because like i mentioned, it feels very thin. Protruding pos pin.
Reviewed on Was this review helpful to you? Yes / No
YFTK Short Cranked Styled RDA Rebuildable Dripping Atomizer
YFTK Short Cranked Styled RDA Rebuildable Dripping Atomizer

Avatar
philipvdb
Member

VERIFIED OWNER
  • JoinedJun 2016
  • Posts 2477
  • Reviews 29
  • Kudos4104
Overall   (4.5)
› Quality
› Value
0 of 2 people found the following review helpful
PROS
Looks nice Easy build Small chamber
CONS
Only bf pin Small chamber No coil No drip tip
I'll start by saying that i won this. Now, this can be a good mtl tank for squonking. 2 problems: i'm not really into squonking, nor am i a true mtl-er. I prefer rdl or dl. I drilled the airflow hole and now it gives me a good rdl. The chamber is small. Not for large diameter coils. I regret that there is no solid 510 pin included. Building is easy, with the adjustable post configuration. If i would have paid 17$ for this, i would have been dissapointed because for that price they could have included a drip tip and some coils. Screws and o-ring are off decent quality and spare ones are included.
Reviewed on Was this review helpful to you? Yes / No