mauricem00's Product Reviews
Sort:

mauricem00
Verified

VERIFIED OWNER
  • JoinedFeb 2015
  • Posts 28
  • Reviews 56
  • Kudos9
Overall   (5.0)
› Quality
› Value
PROS
good flavor. cheap price
CONS
difficult to wick properly
writing this as a followup to my original review. after spending a few hours trying to wick this so that it did not flood or give dry burns I discovered that the 8 wick 2.0 ohm premade wires and wicks ( SKU: 2069700 ) are a quick and easy way to wick this tank. simply run the wicks down the juice channel trimming them at or just above the bottom of the top cap threads and the tank works great the wicks are the proper size for this tank and give no dry burns of flooding. another quick and easy solution from fasttech. these premade wire and wicks also work great for rebuilding the short MT3 or GS-H2 BCC coils.
Reviewed on

mauricem00
Verified

VERIFIED OWNER
  • JoinedFeb 2015
  • Posts 28
  • Reviews 56
  • Kudos9
Overall   (5.0)
› Quality
› Value
PROS
well made reliable
CONS
none
like this so much that I purchased a second one to have for a back up. like all machines this mod does require regular cleaning but with proper maintenance it has proven to be very reliable. the spring in the switch has worked very well for me but I ordered magnets for the switch to try them out. when cleaning be careful not to lose the small rice pin in the switch assembly. this is a 2mm pin and I found that bicycle tire spokes were the same diameter so I was able to make a new rice pin with a bicycle spoke and a dremel tool.lubricating the threads with VG after cleaning does make them work much smoother.mineral oil works well too. I would highly recommend this mod
Reviewed on

mauricem00
Verified

VERIFIED OWNER
  • JoinedFeb 2015
  • Posts 28
  • Reviews 56
  • Kudos9
Overall   (5.0)
› Quality
› Value
PROS
well made tank. good flavor and vapor production
CONS
factory coils do not work well
this is a great little tank that gives more flavor than my high powered RTAs ( EK V3 and orchid V4) the coil that comes with it did not work very well but when I rebuilt it with this https://www.fasttech.com/product/2069700 and it gave me great flavor and good airflow and vapor production without flooding or leaking.works great with the kanger protank air flow control valve https://www.fasttech.com/product/1654500 great little tank at a very affordable price. may be the best BCC on the market
Reviewed on

mauricem00
Verified

VERIFIED OWNER
  • JoinedFeb 2015
  • Posts 28
  • Reviews 56
  • Kudos9
Overall   (4.2)
› Quality
› Value
PROS
works very well
CONS
incomplete machine work
arrived very quickly (7 days ) but had burs that needed to be removed. after 5 minutes with a dremel tool unit worked very smooth.small and fits well in my pocket atomizer fits well but switch needs to be cleaned up to work smoothly. for the price it is a great mod
Reviewed on

mauricem00
Verified

VERIFIED OWNER
  • JoinedFeb 2015
  • Posts 28
  • Reviews 56
  • Kudos9
Overall   (5.0)
› Quality
› Value
PROS
great flavor
CONS
difficult build
would be better with a glass tank but it does provide great flavor. takes time to learn how to build properly. it is am erlkonigin clone and requires the same build as erlkonigin tanks. when built right it is a great MTL tank. I use 8 turns of 26 gauge kenthal on a 3mm form (1ohm) and it is one of my favorite tanks. I have 2 and just ordered 2 more
Reviewed on