majistir's Product Reviews
Sort:

Avatar
majistir
Verified

VERIFIED OWNER
  • JoinedJul 2014
  • Posts 430
  • Reviews 122
  • Kudos1118
Overall   (2.0)
› Quality
› Value
Annoying little rta. Its either an slightly airy MTL or Clouds bro with the 2 different sized silicone reducers. Effectively eleminating my style of vaping which is inbetween those two, slightly restricted lung hit. Clouds bro setup with even a giant coil is so airy i can barely taste flavors. Closed off its very flavorful but the dumb airflow design on the outside doesnt make sense. You can hear/feel the air only coming in from one side... its not as smooth as say a subzero rda with the same type of design. Its very easy to build on and wick. Condensation builds up inside and has no where to go but into the intake and down your mod. Silicone inserts just dont make sense right next to your coil! I havent burnt mine yet but you want ur coil by the air... no way am i trying to vape a burnt silicone flavored juice. Filling is a pain. Gotta hold the base from spinning when unscrewing the top. The annoyance factor in that will make you wonder why.. just why? Might be worth it for MTLers for a lowpro look. Way too much hassle for me. Defeats the purpose of a rta, or an rda. The middle ground between the two were not met.
Reviewed on

Avatar
majistir
Verified

VERIFIED OWNER
  • JoinedJul 2014
  • Posts 430
  • Reviews 122
  • Kudos1118
Overall   (5.0)
› Quality
› Value
PROS
-Doesn't look stupid like most tank setups with 5-7ml capacity. -Works like a Mech but with an off button for pocket carry. -Perfect for new vapers.
CONS
-RDA sleeve is stuck. -510 pin does budge so some BF RDA's wont work without modification. -RDA build could use some quality control.
I purchased this because I never owned a squonker and love the way mechs vape. The mod itself is so easy to use. Its about 3mm taller than a smpl mod and noisy cricket. And about the same width and depth as the noisy cricket. This will be one of my recommendations to new vapers. It doesn't require you to carry extra bottles with the 7ml capacity and squonking ability. New vapers will probably be starting with higher nicotine juice anyhow so 7ml should be a good daily amount and battery life of a single 18650 should last most of, if not all day. Its smaller than a pack of cigarettes and with 60watts on tap and a .2ohm build, it will give the hit an ex smoker needs. If I were to change one thing before giving this to a friend, it would be the RDA. The idea of a no fuss coil build you can purchase and screw on real quick is great but the screws weren't tightened down and the mod wouldn't work. Yea, its simple to tighten them down but now its a hassle to get it working. Perfect for a summer time vape where pocket space is limited and outdoor activities are a plenty. Plus you get everything you need to start vaping besides the juice for about the price of a carton of cigarettes.
Reviewed on
Youde UD Wire Spool Tamer (5-Pack)
Youde UD Wire Spool Tamer (5-Pack)

Avatar
majistir
Verified

VERIFIED OWNER
  • JoinedJul 2014
  • Posts 430
  • Reviews 122
  • Kudos1118
Overall   (3.0)
› Quality
› Value
They work but they are so damn skinny. I was hoping they would cover up all the wire in the spool to keep everything nice and tight. Theyre a pain to adjust but once you got it, they stay. I don't see the elastic lasting too long and I wont be purchasing anymore(not that I would need to). Satisfied but not excited about these.
Reviewed on

Avatar
majistir
Verified

VERIFIED OWNER
  • JoinedJul 2014
  • Posts 430
  • Reviews 122
  • Kudos1118
Overall   (5.0)
› Quality
› Value
PROS
-small -large bottle -easy refill access to bottle and battery -adjustable 510 (adjustments to align RDA airflow) -multiple battery options (even without authentic conversion) -easy disassembly
CONS
-paw key design for battery -small squonk holes (hard to flood RDA but takes longer to fill) -anodized threads and contacts -limited threads on battery cap
So I own a few authentic and cloned squonkers like the hugo, driptech ds, coppervape, and the dripbox. Now I own 2 of these pulsars. These are my favorite of them all. It may require some tweaks to get it working right but its worth it and not very hard. All I had to do on both of mine where a few bends on the contact plate to get it the button to sit straight, a little electrical tape to keep it from touching metal top plate, and removing the anodization on the threads. I ended up ordering the authentic 2x700 kit with 21700 and 20700 tubes along with the battery caps. If I were to purchase it again I would leave out all the tubes and just get the battery caps for easier access and get the bottle plate so the pull tab snaps in and out nicely. One of the battery tubes cracked the housing when jamming it in and to be honest you don't even need the tubes. They do not complete the circuit. its all done with the long screws. What I actually did was just remove the metal tube all together which allowed for more space to screw the battery cap in and now I can use 18660,20650,20700,21700 anytime I like. Just need to switch the battery caps for the longer batteries. Yes you can see the battery but it can be personalized with wraps if need be. One other thing to note, the black housing comes with a matte like finish but after some use it turns to a smooth finish (pocket carry and regular use).
Reviewed on

Avatar
majistir
Verified

VERIFIED OWNER
  • JoinedJul 2014
  • Posts 430
  • Reviews 122
  • Kudos1118
Overall   (5.0)
› Quality
› Value
As title says, it fits 5683100. These were actually better quaility than the original. This set is what makes the coppervape so great. So simple and smart use of space for a mechanical connection.
Reviewed on