kydo56's Product Reviews
Sort:

kydo56
Verified

VERIFIED OWNER
  • JoinedDec 2016
  • Posts 411
  • Reviews 166
  • Kudos137
Overall   (5.0)
› Quality
› Value
PROS
flavour short
i like it, great flavour, well made, i like the fat/stubby look of it :) i settled on the 1.6 resister for mtl with afc barely open..... tried the 1.2 first, was ok for a while but found adjusting the afc seemed to make little to no difference if i felt i needed a bit more air. no problems with flooding on refilling for me strangely, as i was expecting from other reviews mentioning and it`s usually good for happening to me on other tanks that don`t have air escape slots unless they`re turned upside down while tightening, i`ve filled this right up to the top of the glass and still ok. it does have quite a protruding 510 pin so annoyingly it does`nt sit flush on any of my mods :( has a quiet/muffled sound while vaping for me....not sure if that`s the tank or the build or both but it`s generally quieter than my other atty`s....kayfun`s, nectar etc. recommended!
Reviewed on
Teflon 510 Drip Tip
Teflon 510 Drip Tip

kydo56
Verified

VERIFIED OWNER
  • JoinedDec 2016
  • Posts 411
  • Reviews 166
  • Kudos137
Overall   (4.5)
› Quality
› Value
PROS
very short good fit
CONS
teflon?
i don`t think i got the one i actually ordered, there`s 2 like this on fasttech but one is a SJMY (sku 6367700).... mine came in a little white box with SJMY written on it and it does`nt mention teflon on the SJMY listing, mine does`nt look/feel like teflon compared to others i have which are teflon, no big deal i suppose as the 2 listings look pretty much identical in size/style, aside from this confusion i`m happy with it....it fits/looks well on my kayfun v3 and shortens the overall height which is`nt a bad thing with kayfuns in my opinion, still great atty`s none the less.
Reviewed on

kydo56
Verified

VERIFIED OWNER
  • JoinedDec 2016
  • Posts 411
  • Reviews 166
  • Kudos137
Overall   (4.0)
› Quality
› Value
CONS
didn`t work for me :(
bought these to use with sku 4133001 nectar but unfortunately they did`nt work for me :(
Reviewed on

kydo56
Verified

VERIFIED OWNER
  • JoinedDec 2016
  • Posts 411
  • Reviews 166
  • Kudos137
Overall   (4.0)
› Quality
› Value
CONS
may need to change o-rings
you may need to change the o-rings for some atty`s, the white one generally fits all mine but the black one seems fractionally wider and is hit and miss, otherwise nice whistle drip tips and keeps any heat down.
Reviewed on

kydo56
Verified

VERIFIED OWNER
  • JoinedDec 2016
  • Posts 411
  • Reviews 166
  • Kudos137
Overall   (3.2)
› Quality
› Value
mine came with a fault unfortunately, bad threading on the 510 adaptor, as soon as it caught the first bit of thread it stuck and would`nt go any further....no problem with the chuff cap though. all ran smoothly returning it and being refunded (thank you fasttech) i have the 22mm one already and they are good for direct lung if you can wick it properly, i had problems at first as a lot do it seems....shorter the better is key i think and rely on tilting to keep it wet, just make sure you put coil/wick on the correct side depending if you are left or right handed for tilting,
Reviewed on