shopping cart empty
jonuk76's Product Reviews
Sort:
Pre-Coiled Wires for RBA RDA RTA Rebuildable Atomizers (50-Pack)
Pre-Coiled Wires for RBA RDA RTA Rebuildable Atomizers (50-Pack)

jonuk76
Member

VERIFIED OWNER
  • JoinedNov 2014
  • Posts 25
  • Reviews 36
  • Kudos25
Overall   (4.2)
› Quality
› Value
2 of 2 people found the following review helpful
When I received these I thought something was not right. Measuring the wire diameter with a digital micrometer confirmed my suspicion - it came out at 0.42mm not 0.5mm. I ordered a few different types and these were the only ones whose wire was a different diameter to the description. Resistance measured 0.8 ohms over the whole length (end to end), dropping to around 0.72 ohms when installed and the tails cut down to size. They work well. Overall I'd have to say they were decent, well made, coils but the description should be updated to reflect the right spec.
Reviewed on Was this review helpful to you? Yes / No
Chinese Zodiac Animal Chi You Style Mechanical Mod
Chinese Zodiac Animal Chi You Style Mechanical Mod

jonuk76
Member

VERIFIED OWNER
  • JoinedNov 2014
  • Posts 25
  • Reviews 36
  • Kudos25
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Nice build quality Engraving looks good Hits well and reliably
CONS
None really
This is one of the better quality clones - higher build quality than the regular brass Chi You in my opinion. Deep engraving, no obvious burrs on any component, works perfectly. Matches well with 23mm atty's.
Reviewed on Was this review helpful to you? Yes / No
Orchid V6 Styled RTA Rebuildable Tank Atomizer
Orchid V6 Styled RTA Rebuildable Tank Atomizer

jonuk76
Member

VERIFIED OWNER
  • JoinedNov 2014
  • Posts 25
  • Reviews 36
  • Kudos25
Overall   (4.5)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Price and value Vape quality Build quality mostly good
CONS
Terminals have a tendency to cut through your coil wire if you slightly overtighten. Terminal screws a bit soft.
I like the way this vapes a lot. Flavour and vapour production are both good. The build took a bit of experimentation, and I find the best result was by putting a small amount of wick into the juice channels prior to fitting the chimney. Without this step, it tended to leak. The airflow is free flowing (more than enough for me) and is adjustable. If you like really high airflow, you can remove the adjustment screws entirely (note they can have a tendency to fall out by themselves anyway if you're not careful). Only thing I'm not a fan of is the terminals, they just need care otherwise you will cut your wire.
Reviewed on Was this review helpful to you? Yes / No
Atomizer Resistance Tester (Ohm Meter)
Atomizer Resistance Tester (Ohm Meter)

jonuk76
Member

VERIFIED OWNER
  • JoinedNov 2014
  • Posts 25
  • Reviews 36
  • Kudos25
Overall   (4.5)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Reads resistance accurately Works with eGo thread or 510 thread Clear red LED display
CONS
It's obviously a modified AA battery box and looks like one, but hey, it does the job..
Takes 2 AA batteries. Reads resistance on my atomisers and seems to be quite accurate. No complaints. A must have as far as I'm concerned.
Reviewed on Was this review helpful to you? Yes / No
Kraken Genesis Styled Rebuildable Atomizer (2.5mL)
Kraken Genesis Styled Rebuildable Atomizer (2.5mL)

jonuk76
Member

VERIFIED OWNER
  • JoinedNov 2014
  • Posts 25
  • Reviews 36
  • Kudos25
Overall   (4.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
When working well, vapes very well indeed Dual coil/dual airflow option Adjustable draw from wide open to tight Small chamber results in great flavour Looks great
CONS
Some scratches on build deck and thread on 510 connector a bit rough Chamber occasionally floods No fill plug supplied
For a genesis I found this a very easy atomizer to build. For a genesis that is - they are still definitely for the advanced user. I use mesh, but it can also be used with silica, cotton, rayon etc. My example was a little rough in places, the 510 thread was a bit sharp, and there are machining marks on the build deck. But they haven't really impacted performance and some fine sandpaper would sort it out. For the price, can't complain too much. BTW do not lay this on it's side when full - it'll leak.
Reviewed on Was this review helpful to you? Yes / No