shopping cart empty
john616's Product Reviews
Sort:
EA Mechanical Mod
EA Mechanical Mod

john616
Member
  • JoinedJul 2013
  • Posts 32
  • Reviews 7
  • Kudos38
Overall   (4.5)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
No misfires Price Button feels perfect
CONS
No brass contacts
Looks nice and the build quality good. The problem and what keeps this from being a great mod is the contacts. The only brass on the mod is on the outside. Even the contact on the inside of the button is stainless. The post and spring appear to be chrome plated as well as the center pin. I sanded off the plating on the bottom of the center pin and there is brass underneath! I'll never figure that out. It cost them more money to plate something that NONE of their customers want. I believe the center pin is fixed as I couldn't get it to move (slide or unscrew). Is it really more cost effective to make the center pin fixed in delrin than to make it slide (float) in the same piece of delrin I don't know but with all of that said I believe it is a good mod. I would love to test the voltage drop for you guys but I don't have an inline meter. If your not blowing giant clouds most of this really doesn't matter anyway. The button on this mod has a nice easy touch to it that I really like. The button lock is sweet as well but what I really like about this mod is it looks like it was made for the Ithaka (sku# 1407800) that I just bought here on Fast Tech. The Ithaka is a touch too big for my other mods but it fits this mod perfectly. I'm not going sub ohm with this so this mod is where my Ithaka is going to live! This may not be the mod for the extreme vaper but for most I would highly recommend. I personally would buy this mod again.
Reviewed on Was this review helpful to you? Yes / No
V3 Telescopic Mechanical Mod
V3 Telescopic Mechanical Mod

john616
Member
  • JoinedJul 2013
  • Posts 32
  • Reviews 7
  • Kudos38
Overall   (4.7)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
All brass adjustable throw on fire button locking fire button when in 18350 mode looks seamless floating center pin feels right in my hand looks just awesome!
CONS
I didn't buy more than one.
This is a completely awesome mod for the money! Exceeded my expectations in every way. dollabillplz you said the locking ring was wobbly when locked...if you screw in the fire button to the right a few turns to shorten the throw a little that will fix your problem. This is one of those "NO BRAINER" buys. :)
Reviewed on Was this review helpful to you? Yes / No
POM Wide Bore Drip Tip for Mutation X V2 / V3 / V4 (6-Piece)
POM Wide Bore Drip Tip for Mutation X V2 / V3 / V4 (6-Piece)

john616
Member

VERIFIED OWNER
  • JoinedJul 2013
  • Posts 32
  • Reviews 7
  • Kudos38
Overall   (4.0)
› Quality
› Value
PROS
I like the overall drip tip
CONS
Does not fit Mutation X V2 or V3
I bought these for the Mutation X V2 but these tips are too big! I like the tip but what does it work with? Does anyone know what RDA this might fit?
Reviewed on Was this review helpful to you? Yes / No
GS-H2 E-Cigarette Round Mouth Atomizer (1.5mL)
GS-H2 E-Cigarette Round Mouth Atomizer (1.5mL)

john616
Member

VERIFIED OWNER
  • JoinedJul 2013
  • Posts 32
  • Reviews 7
  • Kudos38
Overall   (5.0)
› Quality
› Value
PROS
Bottom coil
I purchased this atomizer in several colors and thought it would be a great idea to get some of the replacement coils at the same time. The SKU# that is listed as the replacement coil does not fit these atomizers the center post is too big in diameter on the replacement coil. I'm not sure what the correct SKU# is, I'm still waiting for staff to respond to my ticket. I like the GS-H2 atomizer, it is much better than the CE4/CE5/CE6 and at a cheap price.
Reviewed on Was this review helpful to you? Yes / No
PLATO #170 Flush Cutter for Rebuildable Atomizers
PLATO #170 Flush Cutter for Rebuildable Atomizers

john616
Member

VERIFIED OWNER
  • JoinedJul 2013
  • Posts 32
  • Reviews 7
  • Kudos38
Overall   (5.0)
› Quality
› Value
2 of 4 people found the following review helpful
PROS
Inexpensive, very sharp, can use in very small places.
CONS
None
These flush cutters work great! I can use them in some very tight places and they cut with very little effort. They are very sharp, so be careful! What a great tool to have.
Reviewed on Was this review helpful to you? Yes / No