iggys's Product Reviews
Sort:

Avatar
iggys
Verified

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 5391
  • Reviews 55
  • Kudos4170
Overall   (5.0)
› Quality
› Value
PROS
Copper Nice switch adjustable 510
CONS
Arrived with small dents on edges of caps Logo was very light and can barely be seen
Very nice mod that works well and looks great.. Mine came with some very small dents and I probably should have gone for the protective box option.. These come wrapped in a plastic bag.. The ink must have run out in the laser printer as the mutant logo is nearly non existent but no problem for me.. Nice brushed finish that appears to be clear coated.. Threads are smooth.. 510 is adjustable and works well with my atty's.. For the price this is a solid 26650 mod that hits hard and preforms flawlessly..
Reviewed on

Avatar
iggys
Verified

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 5391
  • Reviews 55
  • Kudos4170
Overall   (4.7)
› Quality
› Value
PROS
Shorter so no magnets needed to reach the battery One piece body so less threads Thing hits hard and works well
CONS
Sharp edge on lock-ring bottom Top battery adjustment pin is stuck in the delrin insulator also
Ok I'm writing a 2nd review as the 1st one assumed there was no battery adjustment pin and there is but it too was stuck in the insulator.. Now I have that worked out this mod works fine.. The biggest con this item has is the Sony flat top batteries I use rattle side to side but some batteries are thicker and would fit fine just not mine.. Once you tighten the battery adjustment pin down on the battery the rattle goes away.. Switch needs a better spring.. Engravings look good.. Nice Mod
Reviewed on

Avatar
iggys
Verified

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 5391
  • Reviews 55
  • Kudos4170
Overall   (3.7)
› Quality
› Value
PROS
Good engravings One piece body so less threads Hits hard It's a 26650 Panzer
CONS
Battery needs to be 67mm Sharp edge on lock ring Spring is light and needs beefing up Top pin is seized in delrin and there is no battery adjustment to take out the slack
You are going to need battery magnets if your using flat top 26650 batteries with this Panzer as it is made to fit a 67mm battery.. It's a bad design but only by 2mm.. It is too wide inside the body and a 26650 rattles side to side so some tape around a dedicated battery will fix that.. The Threads are ok but the top pin is the same as all the other panzers and needs to be worked on to free it from the delrin insulator.. My 28.5mm KFL+ has a 1mm gap under it.. I just got it so no mods done yet.. A 18650 battery adapter and some tape and you can cure the side to side rattle also lower weight and use protected batteries that should fit perfect in this mod.. I have run it with magnets in 26650 and 18650 and it works fine and hits hard with my sony vtc4's.. Not the most detailed switch but it works fine.. The spring is very light so a bigger one will be needed to carry the weight if set down unlocked.. Lock ring edge is very sharp but the ring works well.. Inside of my tube came filthy..
Reviewed on

Avatar
iggys
Verified

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 5391
  • Reviews 55
  • Kudos4170
Overall   (5.0)
› Quality
› Value
PROS
Good for large clouds Look awesome Good fit on most Atty's
CONS
No POM or insulator so they get hot when chain vaping
Love these DT's and people ask about where I got these more than any other I own.. Great quality..
Reviewed on

Avatar
iggys
Verified

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 5391
  • Reviews 55
  • Kudos4170
Overall   (5.0)
› Quality
› Value
If you have many atty's and don't want to spend a lot of money getting organized then do yourself a favor and get these stands.. So good I ordered 7 more.. These should last a lifetime..
Reviewed on