helldeathnr1's Product Reviews
Sort:

helldeathnr1
Verified

VERIFIED OWNER
  • JoinedAug 2014
  • Posts 194
  • Reviews 29
  • Kudos77
Overall   (4.0)
› Quality
› Value
PROS
up to 195w obviously Battery Life simple to use
CONS
no charge-port only fires down to 0.37 ohms non-adjustable 510 too big
I've been using this thing for about 2 months now, and there are some things I love about it and some things I hate about it. First the pros: It just worked with everything I screwed on it as long as it was above 0.37 ohms. With the v2, you get somewhat of accuracy for your output, means, if you set it to 30watts, it will give you around 30watts (mostly slightly above it). I'm a moderate vaper and I can vape my lemo for about 3 Days at 0.7 ohms at around 30-40watts... so you get about 70% of the mah you put in there (I'm using 2500mah efest 35A or 2500mah vappower 35A). The vape is consistent ... meaning, that you still get your 100w, even at low battery life .... which was a first for me (even the authentic hana mods go down in power, when they reach the last bit of the battery life gauge) Now the cons: The menu and many things you can set in there is just unneccessary in my opinion. And the device is just way too big, to carry it around. As well as you have to disassemble the unit every time you swap batterys, which is kind of annoying. So .... my 2 cents would be: Make the device smaller, meaning without that huge gab between the batteries and the outer shell of the device. Get some sort of 12v-charging-rail installed and please get rid of that useless ego-connector and do a good, adjustable and flush SS-510 instead. Aside from this, its a great product for cloud chasing, and "at-home vape time".
Reviewed on

helldeathnr1
Verified

VERIFIED OWNER
  • JoinedAug 2014
  • Posts 194
  • Reviews 29
  • Kudos77
Overall   (4.7)
› Quality
› Value
PROS
flavour build deck the huge amount of acessories wicking capabilities (95% vg no problem) works perfect with temp control
CONS
bottom of the base wasn't cloned very well which gives a restrictive airflow equivalent to about 2-2.2mm airhole on deck is just 2.5mm
After drilling into the top of the shaft to reduce the collection of condensation behind the drip tip Drilling the airhole on the deck to 3mm Cutting down the insulator in the base to only use it as an insulation for the positive connection drilling into the airflow hole from the base to the deck with a 6mm drill for about 4-5 mm ..... It became my favourite flavour atty next to the origen genesis v2 mk2 and the squape R
Reviewed on

helldeathnr1
Verified

VERIFIED OWNER
  • JoinedAug 2014
  • Posts 194
  • Reviews 29
  • Kudos77
Overall   (5.0)
› Quality
› Value
PROS
airflow build quality flavour
CONS
orings on the top cap are a little bit too small dual coil build deck sometimes can cause a coil to short as its too close to the juice hole positive post can spin
Overall I'm very impressed with this product. Aside from having great ariflow, at high wattages this thing really can produce flavour superior to a dripper build quality is very stable, nor much of machine oil in mine and the build is fairly easy
Reviewed on
Kanthal FeCrAl Alloy Resistance Wire for Rebuildable Atomizers
Kanthal FeCrAl Alloy Resistance Wire for Rebuildable Atomizers

helldeathnr1
Verified

VERIFIED OWNER
  • JoinedAug 2014
  • Posts 194
  • Reviews 29
  • Kudos77
Overall   (5.0)
› Quality
› Value
PROS
none
CONS
none
actually this is equivalent to a 0.35mm wire around 27gauge for our american friends :) good wire ... can't complain
Reviewed on

helldeathnr1
Verified

VERIFIED OWNER
  • JoinedAug 2014
  • Posts 194
  • Reviews 29
  • Kudos77
Overall   (4.7)
› Quality
› Value
PROS
Flavor is exceptional - even better than the original plume veil Deck-design is pretty much the same as the original deep juice well the airhole-size is actually 3.2mm ... but more than enough for everything
CONS
reaks like a oil-tank at arrival the draw might be a little bit thight, but you can get used to it pretty fast biggest con: !!!Orings it comes with do not fit!!!
I'm using this 1:1 veritas cole for a while now and I'm really impressed how much more flavour this design can put out ... it even got me into finding an original one to compare it. So: the post-block behind the brass-screw is a little bit larger on the clone than the original, but aside from that, everything is 1:1 .... I've put something up with the non-fitting orings. I've spun some thin wool in the lower oring slot and put the barrel on it .... It leaks a little bit after 2-3 days of heavy vaping, but aside from that, it works just fine. The drip tip hole takes every drip tip that I own ... so no problems there. The pin at the 510 is actually adjustable, you just have to know that the positive pin is just one big screw .... so, as you're prolonging the connection at the bottom, the positive nuts are going to loosen, and vice versa ... just be aware of that. Great little atty, with non fitting orings .... for anyone that can handle some rubber-shit .... just go for it ... extremely cheap, extremely good flavor.
Reviewed on