hammuh's Product Reviews
Sort:

hammuh
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 24
  • Reviews 66
  • Kudos7
Overall   (5.0)
› Quality
› Value
This is a great MTL RTA. Although I do not recommend to beginning builders. Inserting the coil can be tricky. I had a short the first time I did it. I recognized that the wire would need to be cut very close to avoid a short, but it happened anyway. I recommend wrapping the wire so that you do almost a complete wrap under the screw, then trim the wire. It is bottom fill. A strange thing about this RTA is that you simply pull the tank out to fill. No unscrewing required. The tank is held by O-rings. This makes me question whether this RTA would be good for carrying in a pocket. Also the drip tip is an odd shape. I think I prefer using another drip tip on this RTA. However the flavor and draw is fantastic. This is real MTL. Flavor can complete with Dvarw and KFL2019.
Reviewed on Was this review helpful to you? Yes / No

hammuh
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 24
  • Reviews 66
  • Kudos7
Overall   (5.0)
› Quality
› Value
Original is by a famous French modder. I like this RTA which gives a very nice restricted vape. Not MTL though. It was easy to build and wick. Very forgiving. I think this would be great for a beginner. It is a no nonsense RTA focused on usability rather than complicated features and adjustments. I like that. Because of the design you can fill without worry of leaking and other troubles. If you like simple RTAs like KFL2019, Dvarw, etc., then this would be a nice addition to those. Would give you variety with a different draw type.
Reviewed on Was this review helpful to you? Yes / No

hammuh
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 24
  • Reviews 66
  • Kudos7
Overall   (4.5)
› Quality
› Value
Looks beautiful. But usability is very bad. Problem with this RTA is the juice flow control. The plastic piece is grooved and needs to match up with another section to allow juice through. Need to turn the plastic section a little bit to open and close it. But this is very hard even when lubed with VG. Not sure if the tolerances are off or what. I have to use rubber gloves to close off the juice control. Of course this needs to be done every time you fill. Otherwise filling is easy enough to accomplish by pulling off the top cap exposing the fill holes. You will need a bottle with a small tip. This gives a hot vape. Kind of like an RDA. This might be because of the small size of this RTA. Actually every Hussar I have tried has given a hot, strong vape. Not really my thing.
Reviewed on Was this review helpful to you? Yes / No

hammuh
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 24
  • Reviews 66
  • Kudos7
Overall   (4.7)
› Quality
› Value
Surprisingly nice RDTA for box mods and tubes. I get a restricted (but not MTL) draw from this. Taste is excellent. Mine did NOT come with a squonk pin so I assume this is not intended for squonking. Kinda hard to remove the Ultem-like plastic pieces when filling. Those pieces are secured by O-rings. I had to use a tool to pry. Probably a good idea to remove the plastic pieces from the deck when dry burning. Liquid capacity should be more since this appears to be a non-squonk RDTA. Also the drip tip has an odd shape.
Reviewed on Was this review helpful to you? Yes / No

hammuh
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 24
  • Reviews 66
  • Kudos7
Overall   (4.7)
› Quality
› Value
Excellent MTL flavor. RTA looks like a perfect replica of the original based on what I saw on YouTube reviews. Problem is that this is a top fill RTA and I do not see any juice flow control. So when you fill and close the top, the pressure will move liquid to the deck causing it to flood. Probably liquid will go out the airflow hole too. There is a "spit" guard, however, but this seems strange.
Reviewed on Was this review helpful to you? Yes / No