hammuh's Product Reviews
Sort:

hammuh
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 24
  • Reviews 66
  • Kudos7
Overall   (5.0)
› Quality
› Value
2 of 3 people found the following review helpful
This is a very nice clone. High quality machining. It originally shipped without a screw but Fasttech shipped me a new one after I opened a ticket. Once I received the missing part the SV worked perfectly. I like that it can use single or dual coils. I prefer single coil and use the single coil cap. This RDA is quite leak resistant due to the way the air flow works. I think the flavor might be slightly worse than the Origen and Magma, but it is still quite good.
Reviewed on Was this review helpful to you? Yes / No

hammuh
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 24
  • Reviews 66
  • Kudos7
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
This is a very small device with a nice button. Only issue is the mispelled "Le Pettt Gros" on the inside, but this isn't noticeable unless device is disassembled. Works with most 22 mm atomizers but be aware it won't work with unusual shapes like Magma. The button is very nice and IMO better than my other mechanicals, Nemesis and XXIX.
Reviewed on Was this review helpful to you? Yes / No

hammuh
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 24
  • Reviews 66
  • Kudos7
Overall   (4.5)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
-includes everything you need to get started with RBAs -quality construction -hefty and durable -adjustable airflow -no branding
CONS
-atomizer occasionally leaks -slight whistling sound with use -top tank piece is very hard to unscrew
The Russian 91% is my first rebuildable atomizer and first purchase from FastTech. The box includes everything you need to get started. It is recommended to also buy kanthal wire and organic cotton balls for rebuilding. Although the parts appeared to be relatively clean out of the box, I disassembled and soaked the parts in vodka, and then hot water. I let the atomizer dry for several hours. It was very easy to reassemble the atomizer. The threading of the steel parts is very smooth. I used a pre built wick and coil. I measured the resistance of the coil to be close to 3 ohms. After reassembling, I filled the unit with Hangsen RY4. Note that you will need a bottle with a narrow tip to fill the device in this manner. I left the airflow screw chamber empty for an airier draw. I set my device to 4.2V for the initial vape. The taste is quite good compared to the other atomizers I currently use, which include various Aspire BDC tanks. However, the atomizer will occasionally leak. To fix this, make sure all parts are screwed together snugly. It also helps to blow into the airflow chamber at the bottom of the atomizer. The atomizer may whistle if you have a hard draw. It probably won't whistle if you draw gently. Another problem I noticed is that the top stainless steel tank piece is very hard to unscrew. I haven't figured out a solution to this problem yet. Overall, this is an excellent atomizer and a very good value.
Reviewed on Was this review helpful to you? Yes / No
SXK Wick'T Styled RDTA Rebuildable Dripping Tank Atomizer
SXK Wick'T Styled RDTA Rebuildable Dripping Tank Atomizer

hammuh
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 24
  • Reviews 66
  • Kudos7
Overall   (5.0)
› Quality
› Value
Surprisingly nice RDTA. I get a restricted (but not MTL) draw from this. Taste is excellent. If you like this check out the Monarch R (non-squonker) also from SXK.
Reviewed on Was this review helpful to you? Yes / No
Berserker V1.5 Styled MTL RTA Rebuildable Tank Atomizer
Berserker V1.5 Styled MTL RTA Rebuildable Tank Atomizer

hammuh
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 24
  • Reviews 66
  • Kudos7
Overall   (4.5)
› Quality
› Value
The flavor is excellent. Real MTL. I use it with the airflow wide open. If you want a tight draw you can certainly get that with this. There are a couple problems with this clone. First of all the build deck post screws suck. I checked reviews to confirm that the real deal uses what appears to be better quality screws. This clone's screws make it hard to trap even 28AWG kanthal wire. Very annoying. Second problem is this is missing a bunch of accessories. No extra mouthpiece. No metal tank section. Real one comes with a bunch of accessories. Finally, the clone looks and feels "average" quality. Worse than items from SXK or Ulton. So this is decent. If I had to do it over again I would probably buy the real Berserker. But the real one is hard to find in my country nowadays and is expensive here.
Reviewed on Was this review helpful to you? Yes / No