shopping cart empty
gundles123's Product Reviews
Sort:
Authentic Oumier Wasp Nano RDA Rebuildable Dripping Atomizer
Authentic Oumier Wasp Nano RDA Rebuildable Dripping Atomizer

gundles123
Member

VERIFIED OWNER
  • JoinedNov 2014
  • Posts 3
  • Reviews 17
  • Kudos0
Overall   (4.7)
› Quality
› Value
PROS
great for flavor easy to build looks good fits a 510 drip tip if you want
CONS
air holes in cap are not the same size as air holes thru posts.
this works great, with a little work. its easy to build, with lots of room for the coil. my biggest complaint is that the air holes in cap are not the same size as air holes thru posts, which caused a high pitch whistle. this was easy to fix within 5 minutes. i trimmed some of the cap air hole with an exacto knife and was good to go. im not sure if it was just a burr or flashing from the molding process or what but its fixed now. buy one and use it.
Reviewed on Was this review helpful to you? Yes / No
Boxer Styled 18650 Mechanical Squonk Box Mod
Boxer Styled 18650 Mechanical Squonk Box Mod

gundles123
Member

VERIFIED OWNER
  • JoinedNov 2014
  • Posts 3
  • Reviews 17
  • Kudos0
Overall   (4.0)
› Quality
› Value
PROS
looks nice everything fits tight
CONS
painted switch issues
i knew of issues when i purchased this, but they are easily fixed. when you first get this you need to fix the switch so the 510 doesnt arc when you press it. there are instructions in the fasttech forums for this. what i didnt know is with the fix it actually ends up scratching the plating where the switch contacts teh 510. at this point the plating has all come off. easy solution is just to replace the 510 with a varitube 510 and be done with it. fantastic little squonker, highly suggest upgrading the squonk bottle though.
Reviewed on Was this review helpful to you? Yes / No
YFTK 510 Central PE Dropper Bottle
YFTK 510 Central PE Dropper Bottle

gundles123
Member

VERIFIED OWNER
  • JoinedNov 2014
  • Posts 3
  • Reviews 17
  • Kudos0
Overall   (4.5)
› Quality
› Value
PROS
doesnt leak has a good cap looks good
CONS
long threads top heavy
I got this to refill my squonk mod and its exactly what i wanted. there are ony 2 things that I could find fault with, very top heavy when low on ejuice, and the 510 threads on the lop are a mile long. they really should have halved the length of the threaded part and it would have still worked fine. get it to go!
Reviewed on Was this review helpful to you? Yes / No
YFTK Replacement Bottom Feeder Bottle for BF Squonk Mod
YFTK Replacement Bottom Feeder Bottle for BF Squonk Mod

gundles123
Member

VERIFIED OWNER
  • JoinedNov 2014
  • Posts 3
  • Reviews 17
  • Kudos0
Overall   (5.0)
› Quality
› Value
PROS
soft doesnt leak fits boxer clone perfect
CONS
short feed tube
bought this to squeeze a little more capacity into my boxer clone. works perfect and is soft! if your looking for a softer bottle this is your replacement right here!
Reviewed on Was this review helpful to you? Yes / No
Lost Art Goon Styled RDA Rebuildable Dripping Atomizer
Lost Art Goon Styled RDA Rebuildable Dripping Atomizer

gundles123
Member

VERIFIED OWNER
  • JoinedNov 2014
  • Posts 3
  • Reviews 17
  • Kudos0
Overall   (3.7)
› Quality
› Value
PROS
finish is perfect has single coil hole set in it takes standard goon drip tips
CONS
air holes in top cap are off a bit.
It might just be mine, but the air holes are just slightly off vertically and side to side. when i close it down to a single hole per side, 1 side opens a hole(the single coil set is a little off center). not a big issue for me as i always run 2 holes or more per side.the holes are just a titch to high to line up correctly with the outer sleeve. the holes are off just enough to be annoying. my suggestion is to spend a little more and get a different clone version.(be aware that not all the clones have the goon sized driptip
Reviewed on Was this review helpful to you? Yes / No