fatum's Product Reviews
Sort:

Avatar
fatum
Verified

VERIFIED OWNER
  • JoinedJan 2016
  • Posts 44
  • Reviews 71
  • Kudos21
Overall   (4.7)
› Quality
› Value
PROS
Easy bottom fill Good airflow Enough replacement O Rings 5ml peek insulator
CONS
Screws Wicking can be tricky
This RTA has a nice 3 post 4 hole deck that is easy to build on. The one thing that you want to replace as soon as possible are the screws. Small, low quality, difficult to screw. Aligning the coils over the airflow hole isn't a problem. With the wicking you have to pay attention. At the top of the juice channels is a larger cutout, you need to make sure that you have wick in these larger openings to avoid leaking. You don't need to fill the complete juice channel with cotton, because this could lead to cotton being stuck in the cover you screw on top of the base. The tank itself consists of a pyrex glass, a top cap and a bottom cap with integrated chimney. While the base is removed you can fill the tank from the bottom through nice, large holes. These holes double up as juice channels when the base is screwed on. Excellent design here. The 2 large airflow holes can be easily adjusted with the airflow ring. It turns easily enough so that you can do it by hand, but isn't that loose that it keeps spinning around, good. And if you really want to, you can remove the airflow ring. The bottom center pin is adjustable and has a peek insulator as added security. I like it when companies pay attention to this. Once in use this RTA produces nices clouds and vapour. The packaging comes with some extra o-rings and screws (no extra tank!) and a good manual. All-in-all a very good RTA for dialy use.
Reviewed on

Avatar
fatum
Verified

VERIFIED OWNER
  • JoinedJan 2016
  • Posts 44
  • Reviews 71
  • Kudos21
Overall   (4.5)
› Quality
› Value
In theory you should be able to build nice coils easy with this tool. Until now I have found this to be a challenge. So most of the time I use it to manually build coils. Even when manually building them this tool is great: you always have the correct size and, when finished, just take out the rod and use it to help you place the coil in the deck. The fully use the tool I recommend starting with some thick wire (24AWG or 26AWG), with that it will be easier to learn how to use this tool. Make sure to clean it before using so that all debris is gone. This avoids frustration over non fitting tops or rods.
Reviewed on

Avatar
fatum
Verified

VERIFIED OWNER
  • JoinedJan 2016
  • Posts 44
  • Reviews 71
  • Kudos21
Overall   (5.0)
› Quality
› Value
These coils are easy to build. In the package is a short diagram explaining the different components and you can find lots of videos on YouTube explaining how to rebuild these. You can rebuild the standard coils of an Ego One, but why would you when you have this option. These coils are excellent for people that don't want to buy a more advanced setup and want to keep using their Ego One (CT, VT) but still want to try building or rewicking themselves.Even if you don't want to build coils, for rewicking they are great as well. I suggest to buy the 0.5 Ohm coils, they give a lot better airflow and flavour.
Reviewed on
E-liquid Refiller Bottle for Electronic Cigarette (10-Pack)
E-liquid Refiller Bottle for Electronic Cigarette (10-Pack)

Avatar
fatum
Verified

VERIFIED OWNER
  • JoinedJan 2016
  • Posts 44
  • Reviews 71
  • Kudos21
Overall   (5.0)
› Quality
› Value
These bottles are great for transfering your bought eliquids in. No more messing around with childproof caps or drippers that are way too slow. Remove the top cap and fill your tank. Couldn't get any easier.
Reviewed on

Avatar
fatum
Verified

VERIFIED OWNER
  • JoinedJan 2016
  • Posts 44
  • Reviews 71
  • Kudos21
Overall   (5.0)
› Quality
› Value
These 3 part bottles, also called unicorn bottles, are perfect for carrying around your eliquids. My most used juices are all in these 30ml bottles. Easy to use when filling a tank or redripping your dripper. Filling the bottles is also easy, you can remove the dispenser head which then gives an opening that is large enough for a funnel. I always have 5 or 6 of these in my case, 2 empty in case I come across someone who made a great juice and wants to share.
Reviewed on