delboy99's Product Reviews
Sort:

delboy99
Verified

VERIFIED OWNER
  • JoinedJun 2013
  • Posts 5
  • Reviews 14
  • Kudos2
Overall   (5.0)
› Quality
› Value
PROS
Build quality - solid Switch works well + very little voltage drop Spring loaded 510
CONS
Threads show a little in 18650 mode
The pictures don't do this mod justice. The build quality is awesome, really solid and the threads are buttery smooth. The spring loaded 510 in conjunction with the telescoping tube means that changing battery or atty is a breeze compared to say Nemesis clone. You are limited to which atomizers will match with this eg. Brass Kraken or Trident. Best mode is 18500.
Reviewed on

delboy99
Verified

VERIFIED OWNER
  • JoinedJun 2013
  • Posts 5
  • Reviews 14
  • Kudos2
Overall   (5.0)
› Quality
› Value
PROS
Good quality clone, well built Air flow control works brilliantly Smal top chamber produces great flavour
CONS
No alum key (is only needed for dual coil build)
I love this atomizer, was not expecting much after reading some slightly negative reviews but liked the look and took a chance for the cheap price. It took ages to arrive but was worth the wait. I am really impressed with the build quality,: the top cap goes on really secure, and there are no leaks when inverted which I is maybe down to the relatively small wick hole. For me this is great and it feels much more secure when in your pocket, than other genesis rbas, although to remove the top cap you do have to screw it onto your mod. The airflow control works brilliantly, you can either had both sides open for dual coil mode (needs alum key to remove grub screw), but I've just been using in single coil mode: a 4/5 wrap gives me around 1.3 ohms which is spot on.
Reviewed on

delboy99
Verified

VERIFIED OWNER
  • JoinedJun 2013
  • Posts 5
  • Reviews 14
  • Kudos2
Overall   (5.0)
› Quality
› Value
PROS
Really easy setup (even for novice) Insulated wick hole / spring positive post Tank can be replaced easily / cheaply 30% cheaper than most UK/EU vendors
CONS
Top cap is a little loose (doesn't exactly fall off but tries to.)
Great atty, great price. Really easy to set up, I sometimes struggle with genesis set ups due to lack of experience, but I got this working straight away, with some 400 mesh and 32 guage kanthal (2/3 wrap) which gave me a 1.4 ohm coil. The adjustable positive post is nice as I have tried this on several mods and you can flush mount it every time. My only whinge is that the top cap is quite loose, not a major problem , it doesn't fall off completely but if your mod on it's side then juice will leak out of the top cap much more quickly than it does with other gennies, hence I find that this is no good for using on car journeys (unless you don't ever put your mod down). But for all other uses it is a briliant atty.
Reviewed on

delboy99
Verified

VERIFIED OWNER
  • JoinedJun 2013
  • Posts 5
  • Reviews 14
  • Kudos2
Overall   (5.0)
› Quality
› Value
PROS
High quality materials and finish Adjustable contacts for switch throw / battery rattle Very small voltage drop compared to other mods.
CONS
Took 6 weeks to turn up (not really FTs fault) Bit naughty to rip off the logo (but it does look cool)
This mod was woth the wait (6 weeks to UK). Hits really hard, the voltage drop is really low probably due to what looks like silver plated contacts. The finish is really nice, a brushed stainless steel with mirror finish top cap, switch and beauty ring. but the mod still looks really nice and is very dinky in 18350 mode (eg at least 15mm shorter than the KTS storm). I have an RSST on top currently which matches the finish and nearly the same diameter, but i would really like to own the Kraken clone which i think would be a perfect match and I'm waiting for FT to get them in stock.
Reviewed on