dansansome's Product Reviews
Sort:
EDC Hand Fidget Spinner Focus Toy
EDC Hand Fidget Spinner Focus Toy

dansansome
Verified

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 1107
  • Reviews 74
  • Kudos938
Overall   (1.7)
› Quality
› Value
PROS
looks pretty spins nicely in one plane (but also see cons/review) quite nicely machined apart from one fatal flaw
CONS
came with a 606 bearing caps seem loose on bearing, making changing direction juddery
i spent ages looking at the spinners on here, carefully choosing specs/shapes etc and settled on this (as well as a 3 lobe spinner). when i ordered, it was listed as an R188 bearing, but just before shipping it changed to a 606. the caps do not sit tight on the bearing, so when its spinning in one plane its fine and spins for a while, but if changing direction the spinner really judders and loses a lot of speed. my 3 lobe spinner does not do this at all, and makes this spinner feel like cheap rubbish. if the cap thing was fixed, then it would be a decent spinner i think, but its a case of "you had one job..."
Reviewed on
UD Roll Coils Kanthal A1 Heating Wire for RBA RDA RTA Rebuildable Atomizers
UD Roll Coils Kanthal A1 Heating Wire for RBA RDA RTA Rebuildable Atomizers

dansansome
Verified

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 1107
  • Reviews 74
  • Kudos938
Overall   (5.0)
› Quality
› Value
PROS
well made easy to work
CONS
none
first clapton wire i bought, its clean, well made and pretty easy to work with, i get good flavour and life from this wire. a dry burn and a douse and its nice and clean again and doesn't look like bits are missing from it. i would definitely buy again.
Reviewed on

dansansome
Verified

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 1107
  • Reviews 74
  • Kudos938
Overall   (4.0)
› Quality
› Value
PROS
cheap does what is says
CONS
no manual
a nice little gadget to see the charging rate and to test the actual capacity of built in batteries. the button on the front seems to toggle through a few counter memories and also reset the current counter. for the money its a useful tool for any usb charged device. although i have found after the novelty has worn off, it has been relegated to a drawer with only an occasional use. but hey, its always good to have the right tool fir the job when you need it!
Reviewed on
Replacement Bottom Tank Segment for NextGen Styled RTA Atomizers
Replacement Bottom Tank Segment for NextGen Styled RTA Atomizers

dansansome
Verified

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 1107
  • Reviews 74
  • Kudos938
Overall   (5.0)
› Quality
› Value
PROS
they fit no sharp edges
a great spare for my nextgens, they are well made, no funny angles on the ends, which allows the o-rings on the nextgen to seal well. sits flush with the edges of the atty.
Reviewed on

dansansome
Verified

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 1107
  • Reviews 74
  • Kudos938
Overall   (5.0)
› Quality
› Value
PROS
clean easy to work came on a decent spool
got this as my first foray into SS rebuilding, i haven't been disappointed. i used this in a nextgen and four wraps gave me around 0.65 ohms which i could fire on all my devices, not just on a SS TC device. good flavour and dint take long to bed in on the mesh wick. the spool it came on also had a handy little hole in it to stop it all unravelling in my vape stuff box. would buy again.
Reviewed on