dansansome's Product Reviews
Sort:

dansansome
Verified

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 1107
  • Reviews 74
  • Kudos938
Overall   (4.5)
› Quality
› Value
PROS
price
bought this for the drip tip converter. didn't disappoint. fits nicely into my kayfin 3.1s.
Reviewed on

dansansome
Verified

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 1107
  • Reviews 74
  • Kudos938
Overall   (4.5)
› Quality
› Value
PROS
good flavour small simple
CONS
leaky when left airflow control ring makes refill awkward
i like the flavour from this atty, simple to build, looks good and its really tiny for the capacity, its quite a pretty looking tank too. The airflow ring just spins, so you have to use a tool in the airflow hole to unscrew the top section to refill. i built it, vaped it and was enjoying it, but it was quickly relegated to the shelf after overnight leaking and awkward refill issues became apparent. i moved onto other atties that were far more reliable without having to investigate if there were o-ring problems or wicking issues. i think i would have been prepared to persevere with this tank if it weren't for the awkward refilling. that is something that cannot be fixed easily, i think it is a design flaw.
Reviewed on
YFTK NextEra Styled BF RTA Rebuildable Tank Atomizer
YFTK NextEra Styled BF RTA Rebuildable Tank Atomizer

dansansome
Verified

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 1107
  • Reviews 74
  • Kudos938
Overall   (4.5)
› Quality
› Value
PROS
flavour compact easy build MTL capable
CONS
squonking is a bit strange (see review) probably leaky in a pocket
im a fan of the NEXT series of atties, this one is also good. the build was probably the easiest of the next series mods (with mesh) i didn't have to mess around for ages working out hotspots. flavour is good, and the range of of airflow options offered allows MTL to lung hits. im using this in a squonking setup. and it works pretty well, although even though the squonk pin outlet is quite high up, it seems to be able to suck the juice back out, and won't actually fill the 2ml tank, which is a little disappointing, not not the end of the world. mine also seems to suffer with juice getting into the airflow holes, im not convinced that when squonking, the juice is not being forced up into the airflow area, im using this as a coffee table mod, so again, its not too bad, but i don't think i would trust this in my pocket when the tank isn't kept upright. i think i would get a bit of a juice dump.
Reviewed on

dansansome
Verified

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 1107
  • Reviews 74
  • Kudos938
Overall   (4.0)
› Quality
› Value
PROS
small well made dna75
CONS
internal design promotes juice leaks to be channelled straight to the board
Bought this for my GF, its a nice compact mod. it came configured in chinese so i had to connect to escribe to return it to factory settings so i could understand what the screen was saying. easy enough to do, but not everyone wants to do this. it does everything you would expect from a DNA 75 device, in a decent form factor. buttons are metal, and the board is mounted nice and solid inside, so the button presses feel positive. the magnetic door is ok, magnets could be a bit stronger and the fit could be better. it doesn't wobble, but you can slide it around very slightly. stronger magnets would fix this problem, especially as the door is quite big, so plenty to get hold of to pull against stronger magnets. the battery terminals hold the battery tight, but wont tear battery wraps. the 510 plate is pretty nice but i would make sure yours is nice and tight (mine was slightly loose when i disassembled), after using a berserker for a couple of weeks (which likes to flood and leak after filling) the mod had basically filled up with ejuice inside. it had leaked out from under the berserker AFC and under the 510 insert into the mod. from there on, the DNA board has some tape around it to hold the screen onto a little sled which piggybacks onto the board. unfortunately this tape seems to be installed in a manner that creates a perfect catch cup for the ejuice seepage, and so the board slowly drowns in ejuice that managed to find its way in. the board on "my" device suddenly started acting like the "down" button was being held. i have taken the thing apart to try and dry out the board to see if it comes back to life. Aside from the unfortunate tape placement, its quite well put together as it uses screws rather than hot glue everywhere. so in conclusion, its a nice little device, just be careful of atties that can seep juice out underneath.
Reviewed on

dansansome
Verified

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 1107
  • Reviews 74
  • Kudos938
Overall   (4.7)
› Quality
› Value
PROS
well made doesn't leak flavour
CONS
silver beauty ring
i love this RDA, i have this one and also the SS version, both have been in regular rotation on my squonkers. primarily used with tobaccos, but also with fruity vapes and for me the vape is awesome. simple to build, with a movable post to fit slightly bigger builds in there, or make room for wicking etc. having only one air hole means its difficult to make this thing leak if you oversquonk. mine arrived with a very slight rainbowing to the inside of the deck, i can only assume from overheating during machining, it doesn't affect the vape though. it would have been nice if the beauty ring was also in black.
Reviewed on