cebzab's Product Reviews
Sort:
![]()
|
 cebzab
Verified
VERIFIED OWNER
- JoinedAug 2018
- Posts
54
- Reviews
51
- Kudos19
|
Overall
|
(4.2)
|
› Quality
|
|
› Value
|
|
PROS
Small size, ergonomic, lightweight
|
CONS
Temp control on ss316L coils needs 20w boost compared to any other temp control box mod that works properly.
|
Perfect size for carrying the mod in the jeans/coat/jacket pocket. Very lightweight compared to all zinc alloy box mods. It's actually almost half the weight of my previous mod (Minikin Boost). Fits in hand perfectly when firing it with trigger both finger or thumb.
Very nice customization with newer firmware. Stabilized wood finish or better to say lack of finish is also very nice since if you like it you use it like it is, if you don't like it you can polish it, wax it or do any kind of finish over it.
Bad part is temp control using ss316L coil is running too low. Compared to my other temp control box mods, using with same setup this one needs 20 watts more to produce the same result. In my case I vape temp control ss 316L coil at 0.25 ohms at 45 watt, but on this mod it has to be around 60-65 watts to produce the same result as my other box mods.
Other bad point which is very subjective is even though it's kind of an expensive box mod, it doesn't feel special. For the price
though compared to other stab wood box mods this one is pretty great.
Reviewed on
|
|

XFKM 316L Stainless Steel Alien Clapton Pre-Coiled Wire
|
 cebzab
Verified
VERIFIED OWNER
- JoinedAug 2018
- Posts
54
- Reviews
51
- Kudos19
|
Overall
|
(5.0)
|
› Quality
|
|
› Value
|
|
PROS
Work well, give good taste, price
|
CONS
Not 0.3 ohm
|
Everything is good about this product. Fast ramp up time even on 40-ish watts. It gives great taste.
I used only 1 coil from the set, but the only niggle I have with them is that when you clip the legs and mount it in your atty it doesn't read 0.3 ohm. Initial read before heating it up and vaping with it reads always between 0.21-0.25 ohm.
Except that it's a perfect coil.
Reviewed on
|
|
![]()
|
 cebzab
Verified
VERIFIED OWNER
- JoinedAug 2018
- Posts
54
- Reviews
51
- Kudos19
|
Overall
|
(5.0)
|
› Quality
|
|
› Value
|
|
PROS
Great cotton, no taste
|
CONS
None
|
Excellent product, no weird taste or smell what so ever.
Would give anybody huge recommendation to get this.
Reviewed on
|
|
![]()
|
 cebzab
Verified
VERIFIED OWNER
- JoinedAug 2018
- Posts
54
- Reviews
51
- Kudos19
|
Overall
|
(4.5)
|
› Quality
|
|
› Value
|
|
PROS
Fits perfectly typhoon gt4
Good capacity for nano kit
Works as well as the regular tank
|
CONS
Have to remove drip tip every time you fill it up
|
Excellent tank, plastic feels good and well made, makes the tank that much lighter to feel even better. 4ml capacity is more then adequate for regular use, looks better then with a regular tank. Taste is the same as without nano kit. Sliding juice control works even better with this.
Only flaw I have is with the top cap. Since it's made to make your GT4 the smallest possible size, problem is every time you fill up the tank you have to remove the drip tip to take off top cap.
If they made a version of this where you didn't have to remove drip tip every time you take off the top cap to fill the tank with e juice this would be perfect.
Reviewed on
|
|

Thunderhead Creations Kanthal A1 Heating Wire for RBA Atomizer
|
 cebzab
Verified
VERIFIED OWNER
- JoinedAug 2018
- Posts
54
- Reviews
51
- Kudos19
|
Overall
|
(5.0)
|
› Quality
|
|
› Value
|
|
Nice wire, good price, buy this and win in life :)
Reviewed on
|