shopping cart empty
arsonist72's Product Reviews
Sort:
Authentic Eleaf ASTER 75W TC VW APV Box Mod (Silver)
Authentic Eleaf ASTER 75W TC VW APV Box Mod (Silver)

arsonist72
Member

VERIFIED OWNER
  • JoinedDec 2015
  • Posts 10
  • Reviews 78
  • Kudos2
Overall   (4.7)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Slim Ergonomic Strong magnets
CONS
Tall 510 threads a little crunchy Little rattle from button
Only got this today so only time will tell on durability but so far I'm happy with what I got. It's slim, fits in my hands comfortably and the button position is perfect. Battery cap magnets are strong and there is no rattle there. Fire button rattles a little bit. 510 threads are ever so slightly crunchy but I think they need to be broken in a bit and they will smooth out. TC/VW work fine, tried a few tanks and drippers on it everything works fine and they all look good on it. Slap a huge tank such as the Taifun on it and it is a pretty damn long setup which makes it a little wobbly when set on a table, bit like a mech tube - more stable obviously. All in all I'm pleased with this mod, hope it lasts. Kayfun mini3 looks great on it
Reviewed on Was this review helpful to you? Yes / No
SXK GT III Mini Styled RTA Rebuildable Tank Atomizer
SXK GT III Mini Styled RTA Rebuildable Tank Atomizer

arsonist72
Member

VERIFIED OWNER
  • JoinedDec 2015
  • Posts 10
  • Reviews 78
  • Kudos2
Overall   (3.5)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Machining Deck No leaks
CONS
Machine oil JFC spins on refill Flavor or lack thereof
I'll be brief as I'm pissed with this atty. Wanted to love this but I was hugely disappointed. Firstly JFC spins when you open the top cap, as the two o-rings that attach the chimney to the top cap are too tight. Doesn't matter how well I lubricate them or whether I remove the drip tip or not, it will spin either way. Only way to avoid that and consequent flooding is leaving the drip tip on and holding it firmly so that the whole bell cap-chimney part won't spin. Obviously changing out the o-rings for thinner ones would also work - if you got any at hand. Deck is great and a breeze to attach coil and wick, only you need to lower the coil as far down as possible or you'll get a lot of throat hit. Draw is nice, smooth and quiet and works well for MTL - although this is primarily a DL tank. What the big disappointment was for me is the flavor, which to put it politely is pretty damn piss poor. It is as bad as the KF5 and that says a lot. Maybe I'm a terrible builder, but with such great taste coming out the GTII, the KF mini3 or the hurricane junior - to mention but a few - I got no time to play around with this. This goes on my list of atties for use with plain nic base only as I like the draw
Reviewed on Was this review helpful to you? Yes / No
SJMY Doggy Styled RTA Rebuildable Tank Atomizer
SJMY Doggy Styled RTA Rebuildable Tank Atomizer

arsonist72
Member

VERIFIED OWNER
  • JoinedDec 2015
  • Posts 10
  • Reviews 78
  • Kudos2
Overall   (4.5)
› Quality
› Value
It's a great tank. Looks good, no top fill leaky nonsense, great flavor, smooth draw, decent vapor. Particularly like the JFC design that doesn't need adjusting and the wicking channels that are a breeze to wick. It's airier than the SXK but I like them both. Mine was easy to disassemble but if yours comes stuck use a screwdriver in the air hole to start unscrewing the tank from the base. Also need to be careful when you unscrew it from the mod, turn upside down just to be safe. It's for 2mm ID or smaller.
Reviewed on Was this review helpful to you? Yes / No
SXK Doggy Styled RTA Rebuildable Tank Atomizer
SXK Doggy Styled RTA Rebuildable Tank Atomizer

arsonist72
Member

VERIFIED OWNER
  • JoinedDec 2015
  • Posts 10
  • Reviews 78
  • Kudos2
Overall   (4.0)
› Quality
› Value
First impression this tank looks great, compact and elegantly minimal lines. Second impression not so great, it was a pain (literally) to dismantle this thing as when the tank is screwed in all the way, it's near impossible to unscrew because of the tiny base even if you take the AFC off and wear gloves. I had to resort to sticking a screwdriver in the airflow hole to get it started but not before cutting my fingers all over as it has a lot of razor sharp edges. Also had to use flat needle tip pliers to unscrew the chimney from the tank. With all that out of the way, it was a pleasure building on and wicking this. Hint: don't go over 2mm ID or you will have to position the resistance above the screws and get a lot of throat hit. Just stuff the cotton in the channels and screw the chimney on. No JFC to control, no leaks, no dry hits it's wonderful and vapes equally wonderfully. Smooth draw, great flavor, decent vapor production, what more to ask for. Great tank!
Reviewed on Was this review helpful to you? Yes / No
SJMY Replacement PC Tank for Doggy RTA Atomizer
SJMY Replacement PC Tank for Doggy RTA Atomizer

arsonist72
Member

VERIFIED OWNER
  • JoinedDec 2015
  • Posts 10
  • Reviews 78
  • Kudos2
Overall   (5.0)
› Quality
› Value
Fits both the SXK and the SJMY so just choose if you want this frosted one or the clear spare tank.
Reviewed on Was this review helpful to you? Yes / No