shopping cart empty
armagast's Product Reviews
Sort:

armagast
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 1
  • Reviews 46
  • Kudos1
Overall   (4.5)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Tough Good stainless steel Huge weight
CONS
Average threads Voltage drop
Very good mechanical mod for self-defence! Very thick stainless tube, so there is no reason to be afraid to break this mechmod. Voltage drop is not good (3.20 under 0.2 ohm load), so this mod is not recommended for cloud chasers. But averall look is quite good for me.
Reviewed on Was this review helpful to you? Yes / No
JETBeam MG20 Silicone Grease for Flashlight Maintenance (20g)
JETBeam MG20 Silicone Grease for Flashlight Maintenance (20g)

armagast
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 1
  • Reviews 46
  • Kudos1
Overall   (4.7)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
More than enough Cheap Smells normal
CONS
Causes a little voltage drop
This silicon grease is useful, while cleaning and fixing flashlights and mechmods. A little drop is enough to make threads work like a charm, so screwing\unscrewing wouldn't be a problem. Lasts about 3-4 weeks, then I have to clean threads and grease it again.
Reviewed on Was this review helpful to you? Yes / No
Multicolored LED Decorative Ice Cube
Multicolored LED Decorative Ice Cube

armagast
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 1
  • Reviews 46
  • Kudos1
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Many light colours Bright lights
CONS
No
It is pretty interesting light cube. It has a few modes (slow and fast blinking), put it on the shelf to raise our (my wife and mine) mood. Interesting inner structure - like ice peaces. Battery can be replaced - big plus, because many low-costing toys do not have this feature.
Reviewed on Was this review helpful to you? Yes / No
Chips Repair Tool Soldering Paste Grease
Chips Repair Tool Soldering Paste Grease

armagast
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 1
  • Reviews 46
  • Kudos1
Overall   (4.2)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Average amount of soldering paste Low cost
CONS
Case is not syringe
Case of soldering paste looks big, but in reality it is half-filled. Paste is good, makes a good and hard connections while soldering. Maybe casing will be better in syringe, because syringe pastes is easier to use while soldering.
Reviewed on Was this review helpful to you? Yes / No

armagast
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 1
  • Reviews 46
  • Kudos1
Overall   (4.7)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Hard-hitting (low voltage drop) Good quality threads All-copper Nice machining
CONS
Sometimes locking ring stucks Long (100+ mm)
Using him for more than year. Lowest voltage drop of all of my mechanicals. It is 3.66 under load of 0.2 ohm. Thats why I love him. Using for RDA and big clouds. To unstuck locking ring there are some advices: 1) Use resin gloves (or surgery gloves) 2) Try to put it in freezer for 10-20 minutes 3) Try to put it in cold water for 5-10 minutes My locking ring been stuck 50 times and this advices helped me a lot.
Reviewed on Was this review helpful to you? Yes / No