shopping cart empty
Yoshi_523's Product Reviews
Sort:
RDA Mini Rebuildable Dripping Atomizer (1.0ml)
RDA Mini Rebuildable Dripping Atomizer (1.0ml)

Yoshi_523
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 42
  • Reviews 24
  • Kudos11
Overall   (4.2)
› Quality
› Value
3 of 3 people found the following review helpful
PROS
- On mine (ordered 24-Apr-2014) all metal parts stainless steel - O-rings on housing & drip tip are a snug fit (no wobble) - Slim 14mm size fits my Ego style batteries - Screws & posts for mounting coil are stainless steel - Super cheap
CONS
- One 1mm air hole doesn't produce much vapour (I drilled a 2nd hole which helped a lot) - Stock mounted coil was giving fluctuating ohm readings going below the 1ohm range (after unscrewing and remounting it reads around 2.2ohms contant.)
Very happy with this RDA! With fairly easy modification described below it chucks good vapour and has good flavour. Other people complained of the housing getting hot as well as issues of it wobbling around with loose O-rings. I had no issues as stainless steel not aluminium and is stainless which I can say for sure as I had to drill an extra air hole which took quite a bit of time and pressure. Steel is tough to drill compares with aluminium. The stock hole is around 1mm. I could not drill an extra hole with a 1mm drill bit as the bit was bending (about to snap) and not cutting enough. With a 1/16 drill bit (1.6mm) I was able to get drill an extra hole which now makes this RDA produce lots of lots more vapour and I can hold my finger over 1 hole if I want to regulate airflow. The 2 base silicone O-rings fit snugly on mine and there was no wobble. Be careful with the stock coil. With my $5 multimeter it was reading fluctuating readings going below the 1ohm range. Obviously not checked after assembly. After unscrewing, torching coil and compressing loosely wound coils together with tweezers (like a micro coil) and remounting I get a good constant reading around 2.2ohms. I kept the wick silica in place and wrapped a little more silica wick around the posts for easy washing then torching or dry burning so I can quickly change flavours. This does need a beauty ring to look flush. I used https://www.fasttech.com/products/1284506. Here is a picture link of mine showing this RDA and the 1/16 hole drilled along mounted on a 650mAh Ego battery with the beauty ring linked above. I've shown it next to a black 650mAh battery with a Protank-II Mini V2 so you can see how small and compact this nice RDA is. http://oi59.tinypic.com/i5vjmq.jpg
Reviewed on Was this review helpful to you? Yes / No
Hangsen E-liquid for Electronic Cigarette (10ml)
Hangsen E-liquid for Electronic Cigarette (10ml)

Yoshi_523
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 42
  • Reviews 24
  • Kudos11
Overall   (5.0)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
- 16mg nic (good hit without massive harshness that say 24mg has) - Great flavour
CONS
- Not sure if this is okay in plastic tanks. I use in a glass tank as citrus flavours are known to crack plastic tanks
Love this flavour. Am almost out of this liquid! On the exhale I can taste some sourness and a nice sweet lemon flavour. It reminds me of those hard lemon lollies I had as a kid that had the lemon sherbet in the centre. If I haven't made it clear already if you like lemon sherbet lollies (AKA candy) you will probably really like this. At the time of writing Fasttech only sold the authentic Hangsen flavours (real logo & box) like this one in the small 10mL bottles. I hope they stock 50mL bottles to keep up with the competition. P.S. Although I haven't used this in a plastic tank to test, citrus flavours are known to crack plastic tanks so I recommend using a glass tank such as the RGM2 (which I used). https://www.fasttech.com/products/1535302. Or of course a stainless steel RDA also works. :) Most foods I know of that taste sour contain some kind of food acid so I would recommend brushing your teeth regularly or sipping water same as you would with acidic foods or drinks to avoid tooth decay.
Reviewed on Was this review helpful to you? Yes / No

Yoshi_523
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 42
  • Reviews 24
  • Kudos11
Overall   (3.7)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
- 24mg nic (really feel that hit!) - flavour once diluted a little is pretty good
CONS
- Flavour a bit strong without diluting in some VG
This flavour is pretty good. Mostly on the exhale I notice a sweet taste and a kind of fruity flavour that is not bad. I have tasted 2 rum flavours I prefer but this one is still pretty good and easily vapable. I just found the flavour quite strong so diluting it with 1/3 or even 1/2 of straight vegetable glycerine makes it taste just right for myself & my friend. Being 24mg diluting with straight VG is okay for me. If you want to keep the 24mg nic hit you can dilute with the fake (no logo or box) Hangsen rum which is very mild in flavour. https://www.fasttech.com/products/1387904. If you want another rum flavour that myself & my friend like even more than this one and already has at great favour straight out of the box I recommend the authentic Hangsen rum (real logo & box) here: https://www.fasttech.com/products/1445107. Note that the authentic Hangsen rum only goes up to 16mg of nicotine but this is fine for me and still quite high.
Reviewed on Was this review helpful to you? Yes / No
eGo Beauty Ring for 2.0mL ViVi Nova Atomizer
eGo Beauty Ring for 2.0mL ViVi Nova Atomizer

Yoshi_523
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 42
  • Reviews 24
  • Kudos11
Overall   (5.0)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
- Looks to be well made, solid, polished stainless steel - Hides ugly gap when using FastTech 14mm mini RDAs which use the 510 thread
CONS
- Small 1mm gap in length which isn't really a problem or noticable once you screw the beauty ring upwards flush the the RDA
Prefect for slim 14mm diameter mini RDAs like https://www.fasttech.com/products/1650104 mounted on a standard 14mm diameter Ego battery. There is a small 1mm gap in the hight of this ring so after screwing on this beauty ring and the mini RDA I screw the ring up flush with the top of the mini RDA this looks great! Highly recommended!!
Reviewed on Was this review helpful to you? Yes / No
FURA Outdoor Stainless Steel EDC Mini Knife Tool
FURA Outdoor Stainless Steel EDC Mini Knife Tool

Yoshi_523
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 42
  • Reviews 24
  • Kudos11
Overall   (4.2)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
- Tiny - Ring/Hole for attaching with a keyring or chain - Super cheap - Immitation leather sheath to cover knife blade
CONS
- Sheath is not tied on to anything so could possibly fall off and get lost.
I bought this for attaching to my survival fire starter, the small brick of magnesium kind that has a strip of flint down one side. The steel scraper/striker that came with the original fire starter was really crap so I replaced it with this. This is a much better design and should hopefully not rust up as easily as the old one. In case anyone is wondering the blade is rather thick and has a steep angle of sharpening. It's not thin and razor sharp like a kitchen knife but more like a chizel. Kind of sharp but not razor sharp. Perfect buntness for me becuase I am using this as a scraper/striker for my fire starter and do not want something I can easily slice my hand open with while lighting a fire. Finish is rougher and not shiny and mirror like the other EDC tool I got of the same FURA brand.
Reviewed on Was this review helpful to you? Yes / No