shopping cart empty
VaporCaper's Product Reviews
Sort:
Goblin Mini Styled RTA Rebuildable Tank Atomizer
Goblin Mini Styled RTA Rebuildable Tank Atomizer

Avatar
VaporCaper
Member

VERIFIED OWNER
  • JoinedJun 2014
  • Posts 200
  • Reviews 105
  • Kudos85
Overall   (4.2)
› Quality
› Value
10 of 10 people found the following review helpful
PROS
Price
CONS
Sinlge coil adapter doesn't fit - might require modding Airflow Control ring required a little modding also
Firstly, I love this tank, once you get the build down it works well and doesn't leak. I takes a few goes to work out how to wick it properly. The correct wicking is crucial to ensure that this tank doesn't leak. I have an authentic and this one is close but suffers form a couple of defects: 1) Single Coil adapter does not fit the centre slot. You'll need to mod it, or lubricate it and apply a little force the first few times to get it in. 2) My airflow control ring was jammed tight and wouldn't move. After a tip from a fellow FTer i put it in the freezer and it worked, however when I went to rebuild I had the same problem. Upon further inspection and comparison with my authentic, I noticed the base where the airflow ring sits on had not been milled flush to allow the ring to move smoothly so I had to file it down, Neither of these things are biggies, but know going in when buying this you will most likely have some small flaws with it and they might be different to the ones I've listed here. If you want it to work flawlessly out of the box, with no modding, get the authentic. If you're not sure about forking out for an authentic, this is a good way to try it out, but bear in mind any issues you might have here are not present in the authentic, so don't judge it (authentic) by the flaws of this 'styled' version.
Reviewed on Was this review helpful to you? Yes / No
Replacement Screws for Atomizers (10-Pack)
Replacement Screws for Atomizers (10-Pack)

Avatar
VaporCaper
Member

VERIFIED OWNER
  • JoinedJun 2014
  • Posts 200
  • Reviews 105
  • Kudos85
Overall   (5.0)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Clean threads No burrs anywhere Stainless steel
Got these as spares for my serpent mini and to replace my velocity clone spares as I've gone through my spares for that one. So far have held up well. No issues grabbing them with my Allen keys. I checked them through a magnifier. The threads are clean with no burrs . The heads are also clean with no burrs. Says they're made from SS - if so that's also great. We'll see how they hold up over time. So far they're good and a must have in the vape arsenal.
Reviewed on Was this review helpful to you? Yes / No

Avatar
VaporCaper
Member

VERIFIED OWNER
  • JoinedJun 2014
  • Posts 200
  • Reviews 105
  • Kudos85
Overall   (4.5)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Excellent finish - no fingerprints Looks great - sleek seamless finish in 18490/18650 mode Nice switch feel - copper pin with spring Hybrid connection with delrin ring Small mod in all size configurations Switch lock
CONS
Switch lock - switch can move around and start locking when in use and it's a little finicky to lock and unlock
The SS finish is excellent and fits together seamlessly (almost - but I'm being REALLY picky - you wouldn't know if you didn't know). Nice sleek look and only 83mm in 18650 mode. Feels great in the hand and does not attract fingerprints. The switch itself feels nice and has the right amount of springiness (for me) with a nice throw - not too long or short. Copper pin. The only thing that is a little bit of a pain is the switch lock which can move around when you are using it and start to lock up. Un/locking the switch is a little fiddley and often I find I start to unscrew the whole switch when I'm trying to engage or disengage the locking ring portion of the switch.
Reviewed on Was this review helpful to you? Yes / No
Authentic GS-Tank Bottom Coil Tank
Authentic GS-Tank Bottom Coil Tank

Avatar
VaporCaper
Member

VERIFIED OWNER
  • JoinedJun 2014
  • Posts 200
  • Reviews 105
  • Kudos85
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Price Simall Holds decent amount of juice Well finished Good airflow option No leaks
CONS
none
Very impressed with this tank. It arrived nice and clean, but I gave it the usual 10min bath. Good finish and feel. Although its short, which I love, it still holds 3ml of juice. This is a great tank if you're a MTL-er but there are enough airflow options to allow you to take longer, restrictive lung hits as well. Flavor from the 1.5 coils on here was very good. Pleasantly surprised at how well this tank performs for the price. I've used the ST Nano and tbh I can't see where the extra dollars are going in terms of performance and vape quality.
Reviewed on Was this review helpful to you? Yes / No

Avatar
VaporCaper
Member

VERIFIED OWNER
  • JoinedJun 2014
  • Posts 200
  • Reviews 105
  • Kudos85
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
Solid little workhorse that's simple to use. Easy to build on, no leaks, great MTL draw and takes most 510 drip tips - I had a couple that were too tight - bit that's not the attys fault. If you want an airier draw - just drill out the hole a little. If you want to run this in dual coil mode - drill an extra one. An Igo L is a must for any RDA collection
Reviewed on Was this review helpful to you? Yes / No