shopping cart empty
Vapor's Product Reviews
Sort:
Genesis Style Rebuildable Atomizer (3.5mL)
Genesis Style Rebuildable Atomizer (3.5mL)

Avatar
Vapor
Member

VERIFIED OWNER
  • JoinedApr 2013
  • Posts 5816
  • Reviews 132
  • Kudos3771
Overall   (5.0)
› Quality
› Value
6 of 6 people found the following review helpful
PROS
Stainless Steel all the way 2mm thick Poly tank air hole lines up perfect with mesh Very well built easy to adjust center post
CONS
Really none.... pyrex would have have added even more value
This Cobra is capable of putting out huge clouds with the right build and juice blend. It is solid built and I have found all the threading to be top notch. The air hole lines up perfectly to the mesh wick. I am running a 1.5Ohm coil at 4.7 volts and blowing Ridiculously huge clouds of vapor. It is a straight forward standard genesis build. After you rebuild this you will want to test fire with cap off and make sure the coil does not have hot spots (one area glows orange). The coil needs to heat evenly (all glow at the same time). An easy way to accomplish this is don't wrap your wire with the threading as an electrician would. Wrap it backwards. Doing this accomplishes two things 1. Shortens the distance of the wire from the wick to the contact 2. Keeps the the wick from being pulled into the post while tightening the nut. You will find the Cobra to be much less fussy if you coil in this method (and all genesis). I have been using 32 gauge wire and 400 ss mesh 60vg 40pg resulting in a great experience. I also use a few drops of cinnamon for throat hit and have had no problems with the tank. Be careful to use a needle that leaves room for air to escape out of the filling hole or remove both screws while filling (if you use a solid wick). Else pressure will push juice out the wick making a mess. To sum it up this has been some of the best value vape dollars I have spent. Of all the values I have purchased here on FT this and the Vamo are by far the highest quality values so far. one other note attaching a small magnet to the wrench makes the screws much simple to deal with.
Reviewed on Was this review helpful to you? Yes / No
Rocket V1 Rebuildable Atomizer Kit (5mL)
Rocket V1 Rebuildable Atomizer Kit (5mL)

Avatar
Vapor
Member

VERIFIED OWNER
  • JoinedApr 2013
  • Posts 5816
  • Reviews 132
  • Kudos3771
Overall   (5.0)
› Quality
› Value
5 of 5 people found the following review helpful
PROS
Vape! Throat Hit like no other atty! Flavor passthrough is outstanding PRICE Spare parts and tools included
You won't find a better atty for the price and performance. After a bit of use and getting the hang of filling these you will find they work flawless. Look up the PDF instructions on the Kayfun and follow them. I have a bunch of much more expensive attys that are collecting dust now unused. The really great thing about this design is the only thing you will need is wire and cotton balls. No need to buy heads or mess with resistance non resistance wire. Very low cost to purchase and use. Well the really great thing about this is the vape! The flavor and hit are the best of any device I have used to date. The plastic tank is the weak link in this design, all versions use plastic and the original also comes with plastic and a metal option. It is a thick tank and mine has performed well even with known tank crackers. That said it would be nice if FT would carry an o-ring/tank replacement kit. If they don;t at this price I will just buy more complete tanks.
Reviewed on Was this review helpful to you? Yes / No
Private V2 Telescopic Mechanical Mod
Private V2 Telescopic Mechanical Mod

Avatar
Vapor
Member

VERIFIED OWNER
  • JoinedApr 2013
  • Posts 5816
  • Reviews 132
  • Kudos3771
Overall   (5.0)
› Quality
› Value
5 of 5 people found the following review helpful
PROS
S.S./Brass/Copper Perfect Firing Button Small size Sharp looking Locking Fire button Vapesafe compatible True Mechanical
CONS
Not a floating 510 pin. (but very easy to mod it to float)
Very happy with this purchase. I will more than likely buy more of these. You can pay 10 times as much and you won't get anything any smoother than this fire button. Mine has a very short throw and is very smooth no matter if pushed from the center or the edge (perfect). The firing button locks making it pocket friendly and Great for everyday use. This will fit a vapesafe fuse and I would recommend using one to protect against shorts (for IMR and non protected battery users). I have used this with 18350, 18650, and 16340 battery sizes and all work great (all non protected button and flat top). The vent hole is open in all configurations. No need to drill or change the venting on the Mod I received. The only down side is the non floating pin which is very easy to make into a floater. My 510 pin came pushed up level with the insulator (press fit into insulator bushing). This could potentially keep flat top batteries from connecting resulting in no fire. The floating Modification will fix this and is highly recommended. Once this simple modification is done you have a perfect mechanical. Bottom line I highly recommend this Mechanical as long as you have the ability to address the 510 pin modification (which is very simple). Buy it you won't be sorry!
Reviewed on Was this review helpful to you? Yes / No
Rocket V1 Rebuildable Atomizer Kit (5mL)
Rocket V1 Rebuildable Atomizer Kit (5mL)

Avatar
Vapor
Member

VERIFIED OWNER
  • JoinedApr 2013
  • Posts 5816
  • Reviews 132
  • Kudos3771
Overall   (5.0)
› Quality
› Value
4 of 4 people found the following review helpful
PROS
Price... Air Flow control is perfect...
This thing rocks! Worth every penny. Sharp looking unit for less expensive materials. Lightening fast shipping. Good job FastTech! It came with a non resistance + resistance wire 1.8ohm (very lose wrapped coil) with a 3mm silica wick (figure 8). After cleaning it out and burning it all off I filled it up and it quickly flooded (the original wick packed in higher than the air inlet). I cut half the wick off each side of the 8 and tucked it back down and that solved the flood. The wick is now below the air inlet opening. I played with the air flow control and am impressed. You can go from no air to removing the adjustment screw for a wide open air intake from both holes which should work wonderful for sub ohm builds. I have noticed that when it sets unused for a while it will gurgle on the first vape. That first vape clears that gurgle and it is good to go. (I always lay my pv on it's side to prevent knock overs. It produces great vape just as it came (cleaned). I'm sure it can do much better with a well wrapped coil. This has by far the best flavor of all my attys. Better than Boges cartos, ProTanks, Cobras, AGAs,Ce's, Vivis, ect... beats everything I have ever used hands down. It's even as good or even better than my drippers. My guess is the flavor concentrates in the coil chamber so when you draw you get a huge burst. So is this a good buy? For me it is I am going to buy another right now. I can't say enough for the flavor of this atomizer. outstanding. PS it does not need to have non resistance wire... In fact the spare wire in the kit is typical kanthal wire.
Reviewed on Was this review helpful to you? Yes / No
Genesis Style Rebuildable Atomizer (3.5mL)
Genesis Style Rebuildable Atomizer (3.5mL)

Avatar
Vapor
Member

VERIFIED OWNER
  • JoinedApr 2013
  • Posts 5816
  • Reviews 132
  • Kudos3771
Overall   (5.0)
› Quality
› Value
4 of 4 people found the following review helpful
PROS
Very well built Stainless Steel Build Stainless Still Drip Tip 2mm Thick Poly Tank Screw on Top air hole lines up perfectly with the wick Extra SS wick and wire Include wrench Comes in a nice gift box
CONS
As with most Gens you will need to have a needle and the wrench to fill with juice. Fast Tech has a few needle bottles for around a buck. The wrench is included.
I used a syringe filled with hot water to rinse the tank out several times, ran the rest under hot water. Then put it on my PV and found the factory build to be 2.0 ohms. I set my PV to 7 watts and filled the Cobra with a heavy vg mix. Wow what a cloud! I Don't think this will make a good stealth device ;) . I have to wait for the fog to clear to type. Very pleased with the way this one works. Right out of the box! It has a perfectly sized air hole making the hit smooth. If you have been wondering if these are worth the money I can assure you they are. This would make a wonderful gift for a vaper.
Reviewed on Was this review helpful to you? Yes / No