shopping cart empty
Vape4more's Product Reviews
Sort:
Authentic Aspire ET-S BVC Clearomizer
Authentic Aspire ET-S BVC Clearomizer

Avatar
Vape4more
Member

VERIFIED OWNER
  • JoinedMay 2015
  • Posts 2806
  • Reviews 113
  • Kudos1814
Overall   (5.0)
› Quality
› Value
6 of 9 people found the following review helpful
PROS
Very tough Heaps of flavour Heaps of vapour Easy to use Cheap replacement coils
These would have to be the best value and flavoursome clearomisers I have ever used and come in a variety of different colours for you to choose from. For mouth lung, (like an analogue cigarette), these are the best clearomisers to start your path into Vaping and you'll NEVER be disappointed with these. Thanks to the metal housing, they can withstand lot's of punishment without breaking and are very easy to fill while your on the go. In saying that, to make filling so clean and easy, I do recommend you to buy the needle tipped bottles available here at FastTech....(SKU1485903) For me, these clearomisers are just perfect. They have a large 3ml capacity and produce so much flavour, making your E-liquid taste so good. I was also surprised in how much vapour these little things produce! These Aspire clearomisers easily screw onto eGo fittings and even the coils are cheap n easy to replace... What more could you ask for? By trial and error, I've found the best replacement coils are the Authentic Aspire 1.6 ohm variety....(SKU1859406). These coils work best at around 10 to 12 watt's or 4 to 4.4 volts and if you prime the coil properly (only before first use), they will last for about 3 weeks (or about 100-150ml) before you need to replace them. If you need to use an eGo ADAPTER, (SKU2044706) is the CORRECT CHOICE, as I've found this Aspire ET-S clearomiser will NOT screw onto SOME aftermarket adapters. Do not take the voltage over 4.4 volts or the coils will burn easily and taste bad. To prime the coil before first using, means to squirt some juice directly into the coil itself before screwing it onto the clearomiser. These little Vertical coils will burn so easy and taste bad, if not properly saturated with juice first. So take your time and do a good job. Any gurgling found after priming your coil, can easily be fixed with paper towel, twisted up, then pushed down into the chimney.
Reviewed on Was this review helpful to you? Yes / No
Authentic KangerTech SUBTANK Vertical OCC Coil Heads (5-Pack)
Authentic KangerTech SUBTANK Vertical OCC Coil Heads (5-Pack)

Avatar
Vape4more
Member

VERIFIED OWNER
  • JoinedMay 2015
  • Posts 2806
  • Reviews 113
  • Kudos1814
Overall   (5.0)
› Quality
› Value
6 of 10 people found the following review helpful
PROS
Authentic parts cheap at FastTech Free delivery to your door Long lasting coils
These coils are long lasting if you don't burn the shitter out of them. The darker the juice, the quicker the coils will build up with crap and burn out. They will work well with juice ratios of around PG40 and PG30-VG70 is still ok if your not chain Vaping. With a fresh coil, make sure you prime the cotton with a few drips of juice first, that's BEFORE INSTALATION!..... These make your juice taste real good and I think the 1.2 coils taste better than the 0.5ohm variety.
Reviewed on Was this review helpful to you? Yes / No
*SALE* Authentic Vaperdance NTBVC Replacement Coil Head
*SALE* Authentic Vaperdance NTBVC Replacement Coil Head

Avatar
Vape4more
Member

VERIFIED OWNER
  • JoinedMay 2015
  • Posts 2806
  • Reviews 113
  • Kudos1814
Overall   (4.5)
› Quality
› Value
3 of 5 people found the following review helpful
PROS
A little more flavour
CONS
Uses lot's more power Not for chain Vaping.
Well, I had to try these NTBVC coils, SKU4271701 and I'm glad I only purchased 'one' for testing. These NTBVC's have a resistance of 0.5 Ohm's and do produce a little more flavour, however this flavour comes at a price as the coil chew's through a lot more power to do it. I have first soaked this coil in PG over night, to make sure it was properly saturated. For this test, I am using the first standard Subtank, with a full tank of fresh juice at 40/60 PG/VG ratio. This NTBVC had a very tight fit to the chimney and produced little or no flavour/vapour at 20 Watt's. Setting wattage to 30, started getting more taste, I found the best setting to be at 45 Watt's and the coil seemed to be spitting and making all sorts of funny noises. Comparing this NTBVC Replacement Coil Head, to a standard vertical Kanger coil, the Kanger win's every time. To get similar taste and cloud which is produced so easily at 30 to 35 Watt's from the Kanger BVC, this NTBVC needs 50 Watt's to even come close to the standard 0.5 Ohm Kanger coils. After Vaping around 4ml of juice, at 45 Watt's, this NTBVC found it hard to saturate properly and started giving me dirty tasting vapour. I found the entire Subtank was very hot and then I decided to eject this coil to the operating table, where it belongs. These coils are no good for chain Vaping and I wouldn't buy anymore of these in the future. If accepted, I've provided a Internal View of this coil in the Review section.
Reviewed on Was this review helpful to you? Yes / No

Avatar
Vape4more
Member

VERIFIED OWNER
  • JoinedMay 2015
  • Posts 2806
  • Reviews 113
  • Kudos1814
Overall   (5.0)
› Quality
› Value
6 of 11 people found the following review helpful
PROS
Fantastic quality Polarized UV400 black lens 4 extra UV400 lenses included Tough carry case with more extra's
These sunglasses are fantastic! I can't fault them... They work well in the harsh Australian sun and arrive with 4 extra interchangeable lenses, included in the kit provided. The build quality has really impressed me and indeed, the attention to detail is absolutely outstanding. Well worth the small investment for a great pair of sunnies. (Picture Provided)
Reviewed on Was this review helpful to you? Yes / No
Replacement 510/eGo Connector + Bottom Cap for eVod 650mAh/900mAh/1100mAh Battery
Replacement 510/eGo Connector + Bottom Cap for eVod 650mAh/900mAh/1100mAh Battery

Avatar
Vape4more
Member

VERIFIED OWNER
  • JoinedMay 2015
  • Posts 2806
  • Reviews 113
  • Kudos1814
Overall   (5.0)
› Quality
› Value
2 of 3 people found the following review helpful
PROS
So cheap Easy to disassemble Great for eGo projects
I got this little gem for a project and it will be perfect. The centre pin is very easy to remove from the full length silicone sleave type insulator and the pin shaft even has a spot to pool some solder for easy wire connection. I have included a picture for you to see the disassembled unit and to avoid insulator damage, you must solder this pin while removed from the connector.
Reviewed on Was this review helpful to you? Yes / No