shopping cart empty
TheMadVaperNL's Product Reviews
Sort:

TheMadVaperNL
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 350
  • Reviews 80
  • Kudos191
Overall   (5.0)
› Quality
› Value
4 of 4 people found the following review helpful
PROS
It kicks ass compared to other KF(L)/Russian models Holds alotttt of liquid PVD :) looks awesome spare parts
CONS
No extra o-rings Lube the chimney/top connector o-ring or it'll screw your chimney off some threads weren't pvd coated
Awesome model, it holds alot of liquid, it kicks ass, I had a massive amount of throat hit, just awesome. All of my cons are seriously minor issues and should not keep you from buying this AT ALL. There was no little o-ring in the top which are usually in kayfuns etc., because of the design it goes through it a bit which is actually better but you do need to lube that ring with some juice and wiggle it around a bit until your chimney doesn't screw off while unscrewing the top. If you don't and unscrew it while there is still liquid in it you're gonna have a bad time. It's very easy to build, just wick it a bit like an e.g. an Aqua. For those that don't own anything styled like that. Just leave your wicks a little longer and push the silica/cotton/whatever you use into the vertical juice channel, not in the horizontal ones. That's pretty much it. It seriously kicks ass, i'm on 5mg of nic right now but I really need to lower the nic level for this atty. Compared to my other kayfuns and kayfun styled models (I own 4 KFL's 2 3.1's 2 of the first Russians and one KFL+) this one preforms insanely well. I even went a bit overboard with my coil ending up on 2.8 ohm and gave it a quick vape on 4 volt, still, just awesome. Some of my threads weren't pvd or maybe a bit damaged from screwing them together. Is it a deal breaker? Not really because, if you screw them on in the correct order again, you won't notice it at all. Just buy one :) you won't regret it.
Reviewed on Was this review helpful to you? Yes / No
Self-adhesive Skin Sticker for Eleaf iStick Pico 75W Mod
Self-adhesive Skin Sticker for Eleaf iStick Pico 75W Mod

TheMadVaperNL
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 350
  • Reviews 80
  • Kudos191
Overall   (1.7)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
The material is strong.
CONS
Print is not bright, very vague, not well colored at all. It doesn't fit perfectly (a few 3mm gaps). Picture is not decently sized making it very unorganized looking on your mod.
Not worth buying in my opinion, it might look like there is an adhesive layer over it to apply it but I can assure you there is not. The material quality is good, I'm leaving it on as scratch protection but for no other reason.
Reviewed on Was this review helpful to you? Yes / No
Convoy S4 DIY EDC LED Flashlight Host
Convoy S4 DIY EDC LED Flashlight Host

TheMadVaperNL
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 350
  • Reviews 80
  • Kudos191
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Very nice pocket flashlight
CONS
Was missing the green glass protection O-rings
Works very well, pretty easy to build, fun to do. Theres a great tutorial on here if you do a quick search. With the LED and driver setup from the turorial mine is putting out A LOT of light (1100 lumen).
Reviewed on Was this review helpful to you? Yes / No
E27 7W 42*5630 LED 2100LM 3000-3500K Warm White Corn Light Bulb
E27 7W 42*5630 LED 2100LM 3000-3500K Warm White Corn Light Bulb

TheMadVaperNL
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 350
  • Reviews 80
  • Kudos191
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
It beats the hell out of a normal 9w 700 lumen savings lamp
CONS
A little whiter then I imagined Wouldn't call this 2100LM, maybe 1100 tops. Not sure if it's actually 7w (?) Completes cirquit when you ground it and touch the lamp (as in, it starts to slightly light up)
As an indication, it beats the hell out of a standard 9w savings lamp with 700lm so if this is actually 7w it's one awesome preformer. This isn't 2100lm though, I'm no lighting specialist but I'd rate it around 1100 or something, which is more then good enough if this is really 7w. It's slightly whiter (or has more blue or green, whatever you want to call it) then I expected (lemmi put it this way, if this is the color of corn it's most likely radioactive :P) but it still looks great. It's small, about 25% smaller then a big dual barrel savings lamp, and well, it just works can't say much about it other then that. Like I said, I have no idea if it's actually 7w, maybe someone will test that in the future but I would still suggest this to someone if they're looking for a cheap led lamp. No idea how long it lasts since I just got it, if it dies quickly i'll post something about it, if it dies in a few years i'll most like have forgotten I even got it from here :P. It's delicate though, for some reason you can slightly power the leds if you put it in a lamp fixture (not plugged in, just grounding it) and touch the leds with your finger. Is that an issue? Doubt it, just a fun fact. Pick one up yourself, I highly doubt you'll regret it.
Reviewed on Was this review helpful to you? Yes / No

TheMadVaperNL
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 350
  • Reviews 80
  • Kudos191
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Lots of flavor. Lots of Vapor. Nice design. Easy Airflow control.
CONS
It's a genny, you can't lay it down on a flat surface. Rusty screws. Screw placing could have been better.
Overal this thing is awesome, great vapor and killer flavor, you can easily twist and turn to increase or decrease the amount of airflow and it looks just awesome. Like I said, it's a genny so for people new to gennies, you can't lay this down flat on a table or it will leak, that's just the design so it's not really a "for everywhere" kind of design. I noticed a bit of rust on the screws already after a short bath, that's a big negative point for me cuz I hate buying extra stuff they could have added for 10 cent extra. It's not the cheapest tank so a few SS screws really aren't to much to ask for. The placing for the screws is slightly off, I tried all positions but the screws really only fit in the 2 designed holes, this means that you have one coil with a short leg and another with a lonnnng leg, not really a deal breaker but you'll have to calculate it into your build to get your coils glowing evenly. Other then that, i'd say, just buy it, you really won't regret it. I hope they put in some SS screws at some point, if not you'll have to buy some at your local hardware store.
Reviewed on Was this review helpful to you? Yes / No