shopping cart empty
TEFL0N_D0N_81's Product Reviews
Sort:
Authentic Wotofo Serpent Mini RTA Rebuildable Tank Atomizer
Authentic Wotofo Serpent Mini RTA Rebuildable Tank Atomizer

Avatar
TEFL0N_D0N_81
Member

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 513
  • Reviews 198
  • Kudos279
Overall   (4.5)
› Quality
› Value
3 of 3 people found the following review helpful
Performance depends heavily on your build. If you're going to take it above 30 watts, 3.0mm coil recommended, clapton would be better. Proper wicking is crucial to minimize dry hits on the 3rd or 4th puff. Build deck is user friendly, but you must cut the excess wire as close to flush as you can. It becomes very easy for that excess to touch the chamber wall when putting it together. Could cause a short if not careful. Fit and finish is fantastic. The only ding would be that the allen key provided doesn't fit the grub screws nicely. Luckily I had another allen key that fit perfectly. I would have thought a single coil build would lower juice consumption rate but sadly it doesn't. This thing eats up juice in a hurry. If you're vaping 35+ watts, a full tank will last you 20-30 min. Thankfully the top fill works quick and easy without a juice flow control.
Reviewed on Was this review helpful to you? Yes / No
Hobo V3.1 Styled RDA Rebuildable Dripping Atomizer
Hobo V3.1 Styled RDA Rebuildable Dripping Atomizer

Avatar
TEFL0N_D0N_81
Member

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 513
  • Reviews 198
  • Kudos279
Overall   (4.0)
› Quality
› Value
3 of 3 people found the following review helpful
For the price, this is a nice atty. I have the authentic as well, and it's not truly 1:1 but it's pretty close. Vapes as nice. Some drawbacks: 1) The barrel snaps with a circular turn into the base. The o-ring fits well but could be a bit beefier. The reason I say this is because you can easily turn and unsnap the barrel off when you want to unscrew the atomizer itself. Happened a few times and got a bit annoyed. 2) The top cap with its o-ring fits very tight (almost too tight). They could have used a smaller o-ring to give it the right tension. If taking off the top cap and dripping to your wick is your preferred method, it could be challenging getting into to seat completely flush as the o-ring on the top cap will fight back a bit. If you find a work-around on those two issues, it's a nice one to have.
Reviewed on Was this review helpful to you? Yes / No
Calvert Styled 18650 Mechanical Mod
Calvert Styled 18650 Mechanical Mod

Avatar
TEFL0N_D0N_81
Member

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 513
  • Reviews 198
  • Kudos279
Overall   (4.0)
› Quality
› Value
2 of 2 people found the following review helpful
The magnets aren't exactly placed uniformly (some are more recessed than others), and the metal finish on the body to switch isn't too smooth. As a result, it feels gritty and the switch never reverts 100% back to place. It won't misfire, but the button will always stick out slightly off center. I shouldn't expect much more for this price, but something to note.
Reviewed on Was this review helpful to you? Yes / No
SJMY Super Soft Bottom Feeder Bottle for BF Squonk Mod
SJMY Super Soft Bottom Feeder Bottle for BF Squonk Mod

Avatar
TEFL0N_D0N_81
Member

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 513
  • Reviews 198
  • Kudos279
Overall   (4.0)
› Quality
› Value
2 of 2 people found the following review helpful
Fits SKU 8204100, but the fit is really really tight. The friction on the walls will hold the bottle from falling out, but makes it a long chore to take the bottle out and refill. Quality of bottle is pretty good though.
Reviewed on Was this review helpful to you? Yes / No
*SALE* SXK IAI V2 Styled RDA Rebuildable Dripping Atomizer
*SALE* SXK IAI V2 Styled RDA Rebuildable Dripping Atomizer

Avatar
TEFL0N_D0N_81
Member

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 513
  • Reviews 198
  • Kudos279
Overall   (4.2)
› Quality
› Value
2 of 2 people found the following review helpful
For a 2-post deck, I wish it had more space in between to allow a fat single coil build. Airflow is decent as well, but can whistle a bit depending on your build inside. Regarding fit and finish though, it's very nice. Definitely SXK level.
Reviewed on Was this review helpful to you? Yes / No