Sylviee's Product Reviews
Sort:

Sylviee
Verified

VERIFIED OWNER
  • JoinedMay 2013
  • Posts 19
  • Reviews 43
  • Kudos22
Overall   (5.0)
› Quality
› Value
PROS
small chambered for best flavor easy single coil build
CONS
airholes are all too tiny doesn't come with a small flat screw driver
flavor is much better in this than the origen little 16!! coil sits low in this and there is a small well in this one so both coil and wicks (which you can make really short like i prefer) get & stay saturated very well when you squonk. the origen little i liked and tolerated it since i only like small chambered RDA's but, the coil area did not get/stay saturated enough to me and it made all my flavors have a dry taste to it, not in this yftk, flavor is just like direct dripping, very clean! have tried loads of RDA's over the years but, always went right back to the only one i loved, the original Eshot phoenix with a 1/16th drilled out airhole, this YFTK strike 14mm is and vapes very much like it did. just outstanding, so glad i decided to pay what i thought was a bit high of a price for a 14mm rda on FT but, it trully was worth every penny and the long wait thats for sure! love it so much, already ordered more and have chosen it as the RDA to stock up on just incase the FDA crap limits our choices.. oh i am a MTL vaper and i still think the largest airhole could be a tad bit larger but, honestly with the 1.5ohm coils i prefer, airhole is acceptable but, i still think it would be best with a tad bit bigger air-hole, not sure why they couldn't just add more sizes!!
Reviewed on
MKWS Kanthal A1 Pre-Coiled Resistance Wire for RBA Atomizers (50-Pack)
MKWS Kanthal A1 Pre-Coiled Resistance Wire for RBA Atomizers (50-Pack)

Sylviee
Verified

VERIFIED OWNER
  • JoinedMay 2013
  • Posts 19
  • Reviews 43
  • Kudos22
Overall   (4.5)
› Quality
› Value
"Authentic MKWS Kanthal A1 Pre-Coiled Resistance Wire for RBA Atomizers (10-Pack) Kanthal A1, 28 AWG, 10-Pack, 2.15ohm" Pretty decent premades (some spaced apart more than others but, not many). I bought a couple of these higher ohms to use with serpent 22mm mini that needs coils with both legs laying down on bottom. i can untwist & bend one leg on these coils to lay flat and still end up with 1.8-2.0 ohm coils for my coffee flavors that i prefer vaping at higher ohms. have coil master kit so could make my own proper coils but for .13 cents per coil here, i don't see the point of bothering these days. the ID on these are 3mm.
Reviewed on

Sylviee
Verified
  • JoinedMay 2013
  • Posts 19
  • Reviews 43
  • Kudos22
Overall   (4.7)
› Quality
› Value
the M4's are regular phoenix style clones.. these M2's are actually not as shown in pic., these (what i received) are the XL phoenix style with a non tappered top cap (all 510 drip tips fit on these).. Unlike the two XL's i bought elsewhere, these XL's have an added bonus, the base is two pieces so no more having to worry about center post moving about, its has its own base and the two coil posts are in another base/piece that unscrews off bottom base.. Also the two coil posts have no white plastic insulation on them so no more worrying about coils being near them and melting them!! CONS: just like the five M4's i got, these also have no holes on either posts, you have to use both screws themselves to hold wire.. Air hole on cap lines up with side of a post, you have to slightly unscrew cap to line it up with coil area (this may not be the case with each one though, sometimes you buy these things and air hole lines up and sometimes they do not)..
Reviewed on

Sylviee
Verified

VERIFIED OWNER
  • JoinedMay 2013
  • Posts 19
  • Reviews 43
  • Kudos22
Overall   (5.0)
› Quality
› Value
PROS
built well
not bad for price. heavy duty and built well. the way this one is built, the three holes don't make much of a difference in airflow.. you do get a tighter draw with this V9 which ups the TH but, lessens the flavor/vapor to me so if this is your preference than its a great buy. if you prefer an airier draw which gives me more flavor/vapor (with same 2.0ohm & ejuice used in this V9), than the V5 phoenix atomizer with the three holes they have is better.. you can drill/enlarge the center hole, or all of them, on this V9 however if you like the looks better than the V5 (which does not need hole/s enlarged at all).
Reviewed on

Sylviee
Verified
  • JoinedMay 2013
  • Posts 19
  • Reviews 43
  • Kudos22
Overall   (4.7)
› Quality
› Value
PROS
heavy duty, cheap price
CONS
connection thread a bit rough
review pic shows regular phoenix style clone dripper.. my review is on the V5 (nimbus clone) http://www.fasttech.com/products/1391400 I LOVE IT!! i chose the three hole version over the one hole version to maybe avoid having to drill a bigger air hole.. the three holes are perfect, no need to drill anything!! posts holes are not really tiny so its easy to rebuild with.. i am using it with a single coil and its working excellent.. This is really heavy duty and built well and i am not having any leaking issues whatsover.. Great buy, thanks FT for offering these!! now for my minor complaints: the 510 thread connection is rough and somewhat sharp, i had to file it with a metal filer and it helped somewhat.. also center post at bottom does not seem to be adjustable on mine, which needs to be in more and straighten up some IMO cause it V5 leans slightly on my pros.. eitherway, i still love it and will be buying more!!
Reviewed on