Rizzy's Product Reviews
Sort:

Avatar
Rizzy
Verified

VERIFIED OWNER
  • JoinedOct 2013
  • Posts 125
  • Reviews 8
  • Kudos68
Overall   (5.0)
› Quality
› Value
PROS
Build quality Ease of building Juice flow control Easy top fill
CONS
Very efficient tank might need to lower your nic
Ordered two of these for my daily drivers received them today straight off I got building on one twisted 25awg 430 SS came out at 0.10 ohms and after five minutes of vaping my usual 12mg eliquid I had a pounding headache this tank is so efficient that a drop in your nice level might be a good idea so you don't have the same problem. Build quality on this tank is great all the threads are butter smooth, the knurling on the top and bottom sections makes dealing with those sections a lot easier then some other tanks out there. Within 5 minutes of taking it out of the box my build was in and I was vaping it is so easy and straight forward to build and wick this tank and so far not a single drop of leakage anywhere not even condensation so far, just remember to close the juice flow control and afc when filling. My eliquid is 75\25 pg & vg and a lot of tanks have problems dealing with and a degree if leaking is common the juice flow control on the supreme is very well implemented and allows you to tailor more precisely then with previous tanks. I read a lot of people saying how large this tank is but it's really not that bad looked good on my ml class it's on the larger side of tanks but on a normal mod it won't look stupid unless your ocd with a mm here or there. Although I wasn't able to vape it for long while I was it was giving great flavour and a nice dense vapour and I was mtl'ing it which can be done quite easily despite what some say. At the price here on fast tech you cannot beat this tank it really is a bargain and given I need to reduce my nic level by half they will pay for themselves in reduced nicotine liquid cost (I make my own liquid ☺) so if your on the fence just buy one.
Reviewed on

Avatar
Rizzy
Verified

VERIFIED OWNER
  • JoinedOct 2013
  • Posts 125
  • Reviews 8
  • Kudos68
Overall   (2.5)
› Quality
› Value
PROS
Good build deck Easy filling
CONS
Build method (see main review) Leaks
OK so for a month this worked like a charm great vape everything you could ask for then the biggest problem with this tank reared it's head. This tank is press fitted together rather then screwed together and over time the deck section works loose and leaking follows. You'll start by seeing a small gap appear at the seam between the air flow control and the juice flow over time this gap will widen first couple of times you can push it back together but time before the gap reappears gets shorter. Once the gap gets to a certain wideness you seem to lose pressure in the tank and the liquid flows freely, sadly this is the same on the authentic it's constructed using the same method it might be better done then the clone but at some point this design flaw is going to affect you. Such a shame as when it works its a damn near perfect vape for me and so easy to work with but it is a time bomb and such as these things are it will go wrong at the worst time. Avoid and look at one of the many alternatives.
Reviewed on
Dvarw MTL FL Styled RTA Rebuildable Tank Atomizer
Dvarw MTL FL Styled RTA Rebuildable Tank Atomizer

Avatar
Rizzy
Verified

VERIFIED OWNER
  • JoinedOct 2013
  • Posts 125
  • Reviews 8
  • Kudos68
Overall   (4.5)
› Quality
› Value
PROS
Easy to build on Good flavour
CONS
1 of the 3 i ordered has very bad threads.
Ordered 3 of these 2 are great easy to build on and great flavour. 1 i ordered has very bad threading on the build deck and tank part making it useless not worth the hassle to return 1 tank so very happy with the other 2.
Reviewed on

Avatar
Rizzy
Verified

VERIFIED OWNER
  • JoinedOct 2013
  • Posts 125
  • Reviews 8
  • Kudos68
Overall   (5.0)
› Quality
› Value
PROS
Decent range of coiling rods Easy assembly Easy to use Nicely packaged
CONS
Do not use pressure
This is a very simple to use but effective tool to make coils, I had one of the common coil jigs and it was OK but having arthritis not always easy to use. With the coilmaster just unscrew the top cap on the main body insert the coil rod size you want your coil and replace the top cap. The winding heads of this are clearly marked so you shouldn't have an issue using the correct one, feed the wire into whatever hole on the main body near the top one wrap round the coil rod top piece on and then gently turn being careful not to put too much down pressure as you do it. Simply turn the required number of wraps you want and your coil is made, getting it off could be tricky for some you need to get a fingernail under the bottom and gently pull it up till the wire clears the bottom piece. Once you have one you'll see how simple and effective it is to use from the second coil I made I've had perfect coils that didn't need much pinching to finish them off it coils that closely. A very cheap simple way to make some excellent coils which once your used to it will deliver every time.
Reviewed on

Avatar
Rizzy
Verified

VERIFIED OWNER
  • JoinedOct 2013
  • Posts 125
  • Reviews 8
  • Kudos68
Overall   (5.0)
› Quality
› Value
PROS
Build quality Ease of use Battery life
CONS
Weight for some will be an issue
This mod is fantastic for the price and just shows how far vaping has come in a short time when something like this can be had for just over £30. Feel and build quality is top notch and until you have it in your hand you can't fully appreciate the shape of the mod it feels so natural to hold and that helps overcome the weight of the mod. It really is a very easy mod to use once you get the hang of the fire button as that is used for most functions and it's easy to over click but half an hour and you should be OK with it. Battery life omg that's where this mod is a killer, it's the first mod I've ever had that could keep up with me for over 24 hours this is the mod to take when your going out fresh battery's and your good to go for the longest day. It is important to update the mod when you get it, just go to wismecs main site, products, rx200 and download the latest firmware. To update unrar the downloaded file and then go into the folder in mine there were 3 files an update application an rx200 .bin file which is the one you need and a presia .bin file. Plug the USB cable into the mod and then connect to your computer and then open the application, click update and select the .bin file and click update within a couple of seconds your done. I bought this to get used to the form factor as I was going to buy the dna200 version but after using this for a couple of days I'm going to buy three more of this, this mod is all I need and will serve me well for any type of vaping I do. If your on the fence about buying this jump down and purchase it won't let you down and there have already been two firmware updates with more promised.
Reviewed on