Rene_vape_master's Product Reviews
Sort:

Rene_vape_master
Verified

VERIFIED OWNER
  • JoinedJun 2017
  • Posts 273
  • Reviews 20
  • Kudos117
Overall   (4.5)
› Quality
› Value
nice fit and finish although some rewrapped batteries can cause the battery door to leave a slight gap on one side(less than 1mm) i LOVE this mod. the paint is awesome, it feels great and quality in the hand with a nice weight to it. i will say if you have never used a mod with a DNA chip before (like i hadn't) then I'd HIGHLY recommend you brush up on how to operate and access ALL the different menu's and features on the chip as it doesnt function like any other chip on the market but OMG the performance of it far outweighs the initial headache and learning curve. had it 8/9 months now, its been used as my daily driver for all my tanks(amongst 11-14 squonkers hah haa....yep, i use up to 16 a day, everyday) and it's still going strong. only complaint is the screen should have a plastic cover to prevent dirt and dust getting into the creavis's around the sides. it would be more aesthetically pleasing to the eye being flush with the rest of the mod around it too.
Reviewed on

Rene_vape_master
Verified

VERIFIED OWNER
  • JoinedJun 2017
  • Posts 273
  • Reviews 20
  • Kudos117
Overall   (4.5)
› Quality
› Value
awesome rda, nice smooth airflow, no whistle, easy to build on and squonks beautifully. The paint is fine, doesnt scratch or peel off in an ultrasonic cleaner but because the steel underneath is brushed and not smooth or polished, it doesnt look as glossy, shiny, smooth or as great as say, a vandy vape rda gold finish looks, such as the pulse 24 or iconic rda's but it still looks great on a brass squonker ;) The springs could do with being a tad stronger so I had no problems pushing them down during coil installation and they make the coil have a solid connection with the posts, plus it comes with two spare springs. I think both the installed and spare springs will last at least a year as long as you dont constantly change up the build with different coil types/sizes/leg widths or dry burn to high a temperature for a sustained time period. overall i'm in love and very happy with this purchase. It vapes absolutely, amazingly great!
Reviewed on

Rene_vape_master
Verified

VERIFIED OWNER
  • JoinedJun 2017
  • Posts 273
  • Reviews 20
  • Kudos117
Overall   (5.0)
› Quality
› Value
PROS
Amazing build quality, fit and finish. Silver plated copper contacts-hits harder than the pulse/ram/nudge. Superb flavour rda (if built correct-coils close together high up) Looks great. Next to no voltage drop (i tested it) Just buy one!
CONS
Edges are not the most rounded, its a bit square. Silicone bottle a tad on the soft side. Plastic bottle a tad on the harder side. Atty has crap flavour if u build it wrong.
This is the best mech squonker on tge market right now period, just go get yourself one right now, you will not be disappointed at all, it looks great, hits great, and has the lowest voltage drop out of all the mass produced squonkers on the market right now when i tested it against the pulse/ram/nudge/azeroth etc....it came out top!
Reviewed on

Rene_vape_master
Verified

VERIFIED OWNER
  • JoinedJun 2017
  • Posts 273
  • Reviews 20
  • Kudos117
Overall   (5.0)
› Quality
› Value
PROS
Really nice Image/ design that is printed in a good resolution. They shrink really well and are cut to the perfect length and so they cover the positive and negative poles perfectly :) They protect the cell adequately enough- better than original manufacturer wraps (Sony,LG, Samsung etc) but not as good as a lot of rewrap wraps, such as Vapcell's wraps. So damn cheap considering a pack of 4 of the 'Pickle Ric' branded Old Dirty Bastards (ODB) wraps costs £4/$5!
CONS
A little on the thinner side so Could be a tad thicker but once heat is applied and they shrink they toughen up a lot and protect better than original cell manufacturer wraps but not as good as some Cell re-wrappers wraps. Image could do with not being as dark but I'm clutching at straws now trying to think of possible cons.
See pro's and con's above- great wraps that i highly recommend, especially for the price!
Reviewed on

Rene_vape_master
Verified

VERIFIED OWNER
  • JoinedJun 2017
  • Posts 273
  • Reviews 20
  • Kudos117
Overall   (4.7)
› Quality
› Value
PROS
Built solid. Great fitment on doors etc No door movement. Internal chip LED's (red/blue) can be turned off. Contacts don't tear battery wraps. Looks better in person than pictures. Does not leak at all! Good 510-fits all attys-spring loaded. Takes 18650/20700/21700 cells. Has very low voltage drop so hits surprisingly as hard as many fully mechanical squonkers (hits harder than the Pulse bf and the Ram bf!)
CONS
Door/panel magnets coukd be bigger and stronger, especially on the front panel but it still stays on and never falls off. Green LED in fire button/switch surround cannot be turned off when Mod is switched on but it only illuminates whilst firing the mod.
See Pro's & Con's. I wasn't expecting much but was massively impressed my this little gem of a mod! Ive dropped mine a few times and it hasn't even scratched it, let alone cracked or chipped it. Id happily pay $35 for this mod so at $22 its a steal!
Reviewed on