shopping cart empty
OneBadwolf's Product Reviews
Sort:
1*LED 3-Mode 1000-Lumen Zooming LED Flashlight
1*LED 3-Mode 1000-Lumen Zooming LED Flashlight

Avatar
OneBadwolf
Member

VERIFIED OWNER
  • JoinedJul 2015
  • Posts 3753
  • Reviews 9
  • Kudos4171
Overall   (3.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Creates Light
CONS
Not a Cree emitter
Good value for the money. No need for the bait and switch in the product description.
Reviewed on Was this review helpful to you? Yes / No
SuperFire Gun Mount Micro-Switch Pressure Pad
SuperFire Gun Mount Micro-Switch Pressure Pad

Avatar
OneBadwolf
Member

VERIFIED OWNER
  • JoinedJul 2015
  • Posts 3753
  • Reviews 9
  • Kudos4171
Overall   (3.5)
› Quality
› Value
PROS
It works
CONS
Threads rough, crappy spring
Does not fit the S2, or C8. However, it is a simple matter to remove the retaining ring of your S2 or C8, remove the retaining ring on the pressure switch, and replace the S2 or C8 switch with the switch from this. You WILL want to replace the spring on this unit, it is a bit shit. It also fits, and works perfectly as-is on Manker tube lights, like my BLF A6 Special edition, and lasers such as https://www.fasttech.com/p/3801204 Good value for the $
Reviewed on Was this review helpful to you? Yes / No
Iwodevape Replacement Resin Tank for Smoktech SMOK TFV12 Clearomizer
Iwodevape Replacement Resin Tank for Smoktech SMOK TFV12 Clearomizer

Avatar
OneBadwolf
Member

VERIFIED OWNER
  • JoinedJul 2015
  • Posts 3753
  • Reviews 9
  • Kudos4171
Overall   (0.5)
› Quality
› Value
PROS
Fits. Held more juice.
CONS
lasted less than 24 hours
I had bought the identical product for the TFV8, and really like it. Then, I ordered this for the TFV12. They both looked frosted coming out of the box, however the one for the TFV12, did not look transparent when filled, like the one for the TFV8 does. this one looked opaque. Later in the same day, my mod tipped on its side. The tank never even touched the counter, yet it completely shattered. As bad or worse than glass. Don't know if I just got a bad one, not going to bother going through Customer Circus, I'd likely be vaping on lasers before I was able to describe the problem in a manner satisfactory to them. I wish a Pyrex version was offered.
Reviewed on Was this review helpful to you? Yes / No
Atomizer Resistance Tester (Ohm Meter)
Atomizer Resistance Tester (Ohm Meter)

Avatar
OneBadwolf
Member

VERIFIED OWNER
  • JoinedJul 2015
  • Posts 3753
  • Reviews 9
  • Kudos4171
Overall   (0.5)
› Quality
› Value
3 of 6 people found the following review helpful
This Ohm meter is a potential hazard. Mine reads .4 high, compared to 4 seperate mods, and my caliberated Fluke multimeter. If it read low, it would just be a piece of crap, but by reading high, it becomes a safety hazard. Consider the possible outome of a noob with a mech using an ohm meter to check their build. In their hands, this is a disaster waiting to happen. I chose this meter because of all the posative reviews, so if you feel lucky, and decide to purchase it, you would be well advised to cross heck this gem against 1 or 2 other trusted meters before you use it. I won't be returning it, as I want to insure it is not resold and will not wind up causing harm. Beware.
Reviewed on Was this review helpful to you? Yes / No