shopping cart empty
Nymzavril's Product Reviews
Sort:
DOVPO GX-200 Mechanical Mod
DOVPO GX-200 Mechanical Mod

Avatar
Nymzavril
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 23802
  • Reviews 280
  • Kudos18261
Overall   (5.0)
› Quality
› Value
58 of 83 people found the following review helpful
PROS
Almost the end to the home made box mod industry
CONS
Not quite the end to the home made box mod industry
I notoriously hate box mods, and some recent purchases made 'away from type' have done nothing to change that; my costly experience with the dreadful Tan regulated mod is a notable case in point. However, I do make my own now and again, and now that I finally have my life back post Juice Junkies, I tend to turn to a game of 'what will an 18650 and a switch fit in?' to while away the hours. I've even turned to the dark side and knocked up a couple of Hammond box mods in my time, if only to stick two fingers up to the garage mod makers who think a pound of hot glue can justify $150 price tags on their pile of s**t abominations - maybe including a fire extinguisher would be a better premise? There's something Vape Jeebus could take to heart. Anyhoo, I digress. To cut a long story short (too late they all cry) I'm not a fan of unregulated box mods. One of the reasons for my chagrin is the fact that clueless cloud chasers seem to think that they're a panacea for "massive clouds", and I do draw some comfort knowing that they're the ones who will get stiffed on a 'custom mod'. Sadly that's also the reason I didn't buy 1,000 of these direct from Dovpo with my own branding, as nothing I could say would get their technical department to agree to remove the 0.2ohm limit on the GX-200. Sadly that one small addition (which their reps claim was requested by customers as 'a safety feature') will mean that uppity cloudies will laugh smugly at this mod as "I only vape at 0.000000000000000000001ohms, anything more is for sissies". Well good, because they don't deserve to own a mod of such immense value as the GX-200. For twenty bucks, you get a nice sturdy but not overly thick case, a tidy interior with no hot glue in sight, magnetic closures, a quality clicky button, AND a nice clear voltmeter. Twenty dollars won't buy you a 1590b box, MOSFET, button, voltmeter, magnets, Fat Daddy 510, battery sled, and ubiquitous pound of hot glue; much less a fully finished mod. This thing is a blinding deal as long as you don't go sub 0.2ohm, and frankly no one needs to. Most of the popular Hammond box mods will sting you for five times the price of the Dovpo, and will often take months to arrive if ever - see Cloud Nine for details on that, they never responded to me after a bunch of Junkies complained and I reached out to them. Ask yourself if you really need to build under 0.2ohms. If the answer is "no", then welcome to the club. Admittedly had Dovpo listened to me and removed that limit, they would have destroyed the home made box mod industry; which would have been a good thing. However, they didn't, so we few who don't give a tinker's cuss about 'clouds' can revel in the fact that we can buy a super cool, well-made box mod for less than the cost of a pizza. The only down side is that if a cloudy sees you using one, you'll be marked down as 'a pussy', because you obviously don't use dual Clapton sleeper 12g Royal coils in your atty. Good - f**k those guys. In conclusion, this could have been an industry changing device, and sadly it it isn't. However, if you're like me and like nicotine over fuggin clouds, this is the absolute shizz. Seriously, stop reading this drivel and buy one NOW!!!
Reviewed on Was this review helpful to you? Yes / No
Aqua V3 Styled RTA Rebuildable Tank Atomizer
Aqua V3 Styled RTA Rebuildable Tank Atomizer

Avatar
Nymzavril
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 23802
  • Reviews 280
  • Kudos18261
Overall   (2.7)
› Quality
› Value
23 of 27 people found the following review helpful
PROS
The best analogue troll in vape history.
CONS
Well, it was clearly never intended to work, so I'm not sure whether 'cons' are exactly relevant here.
Legend has it that Chang yoo Kim of Footoon leaked plans for this atty to cloners, as revenge for both their copies of his designs, and the chinese factory that makes the authentic Aqua sellimg OTM versions out the back door to FT. We shall never know the full truth of any if this, but having finally received a 'V3' fully aware of the liklihood that it wouldn't even work, I kinda think thats how the whole deal played out. A lot of the following will be assumotions and guess work, because i dont think there is a correct way to configure, build, or use the V3 - it was designed to look vaguely plausible enough for cloners to build it. It could be some sort of auto dripper arrangement, as there's no clear way to get wicks into the tank and through the coils. I suppose one could pack out the chamber with wick to cover the three slits cut into the top cap, and tip the whole rig to wet them. Naturally that would also mean juice flowing down the holes in the ceramic deck and into the huge central column that carries the positive connection, and takes up most of the tank capacity. Oh, and the ceramic deck? Hilarious! It wont stay in place, and the arrangemnt for the legs are best described as being like a kanger protank head, with a rubber bung and positive contact seperating the soon to be very hot bits of wire. Look, I'm just going to stop - I'm not even going to build this junk, as I only bought it as a curio - but suffice to say that this is a perfect storm of dumb ideas, and I'm just astounded that the cloners fell for it. I'm kinda glad they did though, as it's seriously funny - I only rated the value as five stars on the assumption they meant 'commedy value'. With any luck, this will be the first and last review of the Aqua V3, as there is really no need to buy one for anything other than a collectible piece of vape memoribilia. Expect these to be changing hands for thousands of dollars in a few decades (we all know that vape collecting is definitely going to be 'a thing' pretty soon, right?) I honestly can't stand Kim, but kudos to him for an epic wheeze.
Reviewed on Was this review helpful to you? Yes / No
Authentic Sanyo NCR 18650GA 3.6V
Authentic Sanyo NCR 18650GA 3.6V "3500mAh" Rechargeable Li-Ion Battery (4-Pack)

Avatar
Nymzavril
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 23802
  • Reviews 280
  • Kudos18261
Overall   (5.0)
› Quality
› Value
12 of 15 people found the following review helpful
PROS
Tons of capacity. LiNiCoAlO2 chemistry is the shizz. Tougher than long division. Durable wraps.
CONS
Go home, you're clearly drunk.
For the longest time, I've been banging on about Panasonic NCR batteries. They're high capacity, are rated at 6.8-10A depending on variant, and can take a whole lot more when pulsed - basically, they're about the best battery for MOST vapers in my very much less than humble opinion. Sure, I wouldn't suggest any deep sub ohm clowdy skumbagness with them, but for most vapers who rarely break 30W and increasingly use TC, these are the bomb.....and not in a 'cloupor mini with 5000mAh Trustfire' kinda way. Well the best just got better with these GA versions, mysteriously launched under the Sanyo banner (Sanyo is now owned by Panasonic). Like all NCRs, these are tough as mutton, and will survive a noob hard shorting or over stressing them with minimal risk of a loud and exciting result. I'm not saying that this is a license to be lazy, but if you messed up badly, you'll be glad you were using NCRs. In fact, several rewrapped 'high drain/high capacity' batteries marketed as being 20-35A (with no clue whether that's pulse or continuous) are in fact 10A Panasonics under the skin. That's grossly irresponsible and wholly indefensible, but it does illustrate the sort of punishment they can take. With the rise in popularity of TC mods, these new 10A 3500mAh cells are a boon. Because of the fashion in which TC works, a build that should cook off a 10A battery doesn't even let them get warm. Because of the way they pulse the current to regulate the temperature, you have to really work hard to push one of these stupendously good batteries beyond what it can handle. I'm using one at 2.25v and 0.08ohms right now, which SHOULD mean almost thirty amps, yet my cell doesn't even feel warm to the touch. Oh, and I've been doing this with previous NCRs for months, and with no drop off on performance. Switching from the B and PF variants has seen my battery life increased by at least a third, and the new GAs seem a little less saggy - by which I mean the battery continues to push the required voltage deeper into its overall capacity. But these are only good for regulated mods, right? Hell no! As long as your build is pulling no more than say 15A in pulses, you're perfectly fine. If you're using a dual cell mech box, even better; I have a pair right now in my Abaddon, and they're happier than a notoriously happy thing in an unusually good mood. I'm also really impressed with the wraps, that to me appear a tad tougher than other cells we commonly come into contact with. I've only had a pair in regular use for a couple of weeks now (bought elsewhere - sorry FT), so only time will tell if that's a feeling supported by practice - we shall see. Oh, and these were my first battery purchase from FT, as the surface mail they previously used, made the cost saving less attractive. I'm glad to say that these arrived in a total of eight calendar days, which is damned impressive. I think this four pack plus the free sturdy case, cost less than the pair I previously sourced on fleabay. WIN!
Reviewed on Was this review helpful to you? Yes / No

Avatar
Nymzavril
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 23802
  • Reviews 280
  • Kudos18261
Overall   (1.0)
› Quality
› Value
10 of 12 people found the following review helpful
PROS
None
CONS
Read the review - this could take a while.
I'm not going to ramble on about this one, as there's already not enough space to fully break down what's up with this terrible mod - so let's cut to the chase: 1/ This appears to be different from the one originally shown in the listing, and probably also different from the one now illustrated. The + and - have gone, but the series adaptor is plain copper, and the apparent quality of finish is nowhere near as good as the photos. 2/ The overall finish is awful - under the grips are marks left by a dull tool, and which can be seen through the vents. The top cap recess of mine also has a small chunk taken out of it, probably where it was pounded home during assembly, or levered out when they forgot to install something. There are various dings and scratches all over the mod. 3/ Despite the listing saying that this is parallel only, it does come as illustrated with the series connector. Howver, unlike the photos that presumably show it in parallel, it comes in series configuration, and is a bitch to convert. 4/ All of the screw heads arrived nicely chewed up. 5/ A key component for running this in parallel, is different from the authentic (it's actually a better idea by far) but doesnt fit in place of one of the insulators. Therefore unless you break out the dremel or find some washers that fit, this will not work in parallel. 6/ The block which makes the connection when you press the soft and vague button, is held in place by a screw that's next to impossible to fit. Also, when you finally manage it, tightening the screw torques the block, meaning that it missaligns and would autofire if left as is. I'm not confident that the block will stay put, so there's a chance it will come loose and fire your mod - a mod which has two screw closure battery doors, and which as supplied, will be in series. 7/ The lock is held in place with a screw. If you tighten it so it wont unscrew, you can't operate the lock. With it loose enough to move, it gradually unscrews. Also, if you press hard enough on the trigger, the lock will disengage. 8/ The trigger is vague, squishy, and will quite possibly fail to fire if you press it too low down the blade. They wanted it to look like a firearm trigger, but that's not how it works. The pull is lateral like a Colt 1911, and not a pivot like most other guns. Conclusion: Whilst reviews of the authentic have picked out a number of the above issues, the key difference here is that you can't run it in parallel as supplied. Sure, a quick skim with a dremel, or even sourcing some metal washers will sort it, but I'm just not motivated to do so. The mod feels cheap and nasty, and I'm not convinced it can be carried and used long term in total safety. As a result, mine is getting thrown on the junk pile without so much as having batteries installed, much less firing an atty. On the plus side, this Trabant of a mod makes the admittedly large and hefty Incubus look like a Bentley by comparison. El Diablo should be ashamed for designing this crap in the first place, but the cloners are next in line for being beaten like a circus chimp.
Reviewed on Was this review helpful to you? Yes / No
Origen Dripper V3 Styled RDA Rebuildable Dripping Atomizer
Origen Dripper V3 Styled RDA Rebuildable Dripping Atomizer

Avatar
Nymzavril
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 23802
  • Reviews 280
  • Kudos18261
Overall   (5.0)
› Quality
› Value
10 of 13 people found the following review helpful
PROS
All the awesome flavour of the earlier versions in a prettier package, and improved airflow.
CONS
Oh do behave; it's awesome, you doofus.
I think all the old vape heads agree that the Origen is the flavour chasers' dream dripper. The V2 was a logical evolution of the V1 with the removal of the separation between the two deep wells, but the pleasantly unadorned exterior remained very much unchanged. With the V3 the same basic layout has been retained, with improved air control and a fresh new look with funky industrial looking fins to boot. I know fins piss off people who insist on telling everyone that they serve no function, but neither does any number of frivolous design flourishes used on vape gear, and I'm solidly in the camp who thinks they look cool. For me the latest Origen really sells the art deco look, and that's a good thing in an industry littered with ugly junk. If you're not familiar with the design, you need to think of the Origen as a tiny genesis, so the post arrangement will be familiar territory for Kraken fans. Plus the cavernous juice well puts it up against mini gennies such as the Sat22. It's not a desperately challenging build, but if you're used to regular three post drippers, expect a small learning curve. Dedicated flavour hounds will be delighted to know that the top cap interior is domed, and the lockable AFC that accommodates both single and dual coil builds, is perfect for MTL adventures in vape nommyness. Even I find the smallest hole a tiny but too restrictive, but wide open it's loose enough for lung inhaling cloudy scumbags. That said, this is not another insipid fog machine - this is all about long lazy vape sessions with oodles of flavour. Not that it can't be used on the go, as the AFC is easily closed off, thus limiting any potential for leaks - though with this thing fully topped off and with minimal wicking, you're always going to run the risk of seepage from the drip tip. It should also be noted just how well made the new Origen is; the machining is flawless, no signs of oil, and the deck has a very classy media blasted satin finish. After a bad few months in the RDA department, I'm glad to say that this is a hall of fame purchase.
Reviewed on Was this review helpful to you? Yes / No