shopping cart empty
[dismiss] Kung Hei Fat Choy. FastTech will be on holiday from January 20, 2020, to January 31, 2020. Shipping and support will resume normal service on February 1, 2020. (details)
MetisRebel's Product Reviews
Sort:
Vaping Hand Cranking Coil Winding Jig Tool for Rebuildable Atomizers
Vaping Hand Cranking Coil Winding Jig Tool for Rebuildable Atomizers

Avatar
MetisRebel
Member

VERIFIED OWNER
  • JoinedNov 2015
  • Posts 5353
  • Reviews 71
  • Kudos6374
Overall   (4.2)
› Quality
› Value
3 of 5 people found the following review helpful
PROS
Will last forever because there's no parts to break on it. Easy to use with arthritis/or lack of dexterity Makes tight coils even if the wire isn't burnt off first [you can do it later] Comes with 5 sizes for coiling
CONS
The spinner was off kilter to the handle. Works fine but aesthetically annoying Takes a bit of getting used to Pricier than the pencil-style
I like this jig for a lot of reasons. The tin box is a bonus for making coils ahead of time and tucking them in there until needed. It can be used as a stable 510 holder for an atty deck. While it looks complicated, it really is not. It takes a little getting used to figuring out where your fingers hold the wire but you can also add one of the posts you aren't using into the extra post hole and keep your wire on there unspinning to make several coils at a time. It winds well enough that you don't even have to burn the springyness out of the wire if you feel lazy and can just do that later, if you want. The five choices of coil size diameter can come in handy, too. It's sturdy and I doubt it will ever need replacing since it's quite simple mechanically so there isn't much to break. It makes tensioned micro coil building easy even if you aren't very dexterous.
Reviewed on Was this review helpful to you? Yes / No
510 Finned Heat Sink for Atomizers
510 Finned Heat Sink for Atomizers

Avatar
MetisRebel
Member

VERIFIED OWNER
  • JoinedNov 2015
  • Posts 5353
  • Reviews 71
  • Kudos6374
Overall   (4.7)
› Quality
› Value
1 of 2 people found the following review helpful
PROS
Inexpensive Work Great
Wish I'd known about these earlier. Would have saved a lot of wear and tear on my battery 510 connections over the years. These are much more solid than a more expensive model I bought last time. Good idea if you want to save wear and tear, taking attys on and off your batteries. A good layer if you get a bit of leaking so juice doesn't spill into your battery/mod.
Reviewed on Was this review helpful to you? Yes / No
18650 Battery Sleeve PVC Heat Shrinkable Tubing (50-Pack)
18650 Battery Sleeve PVC Heat Shrinkable Tubing (50-Pack)

Avatar
MetisRebel
Member

VERIFIED OWNER
  • JoinedNov 2015
  • Posts 5353
  • Reviews 71
  • Kudos6374
Overall   (5.0)
› Quality
› Value
1 of 2 people found the following review helpful
PROS
Easy To Use Fit 18650 Perfectly Look Spiffy
Save your batteries if the coating gets scratched up with these nifty and inexpensive battery sleeves. Easy to use. I didn't have a blow dryer so I just warmed them for a few seconds over the stove (Do not do for more than 5 seconds) and they wrapped around beautifully. Great for when you ding up your batteries getting them in and out of the mod and charger. Also, the sticker that shows the battery type can be reapplied *beneath* these before you heat it, so you still know what your battery type is after you apply the new cover. Great little product and cheap, cheap, cheap :)
Reviewed on Was this review helpful to you? Yes / No
PE Empty Needle Refiller Bottle for E-Liquid (5-Pack / 5ml)
PE Empty Needle Refiller Bottle for E-Liquid (5-Pack / 5ml)

Avatar
MetisRebel
Member

VERIFIED OWNER
  • JoinedNov 2015
  • Posts 5353
  • Reviews 71
  • Kudos6374
Overall   (5.0)
› Quality
› Value
1 of 2 people found the following review helpful
PROS
Soft Plastic, Easy to Use Good Needle Tips Solid Caps
These are handy little bottles for test driving DIY juices. The soft PE bottles don't buckle and crack like many 5ml PE bottles, do. The thin needle tips will fit into any atty. The caps are easy to pop on and off due to the square overhang for those that don't like the "child proof" aka "frustration extraordinaire" caps. Inexpensive AND reusable. What more can you ask for? :)
Reviewed on Was this review helpful to you? Yes / No
Rubber O-Ring Seals for E-Cigarettes (10-Pack)
Rubber O-Ring Seals for E-Cigarettes (10-Pack)

Avatar
MetisRebel
Member

VERIFIED OWNER
  • JoinedNov 2015
  • Posts 5353
  • Reviews 71
  • Kudos6374
Overall   (5.0)
› Quality
› Value
1 of 2 people found the following review helpful
PROS
Just The Right Size for Kayfuns/Monsters Red is Easy to See And Find Cheap
Work perfectly to seal bottom screws for Kayfuns, Russians and Monsters. The red colour makes it easier to see on some backgrounds than the normal black. Inexpensive and a useful addition to every atty builder's toolkit!
Reviewed on Was this review helpful to you? Yes / No