PEI 510 Drip Tip for Coppervape Hussar RTA SKU 9649469 https://www.fasttech.com/products/9649469 e POM 510 Drip Tip for Coppervape Hussar RTA (2-Pack) SKU 9649470 https://www.fasttech.com/products/9649470 Foto: PEI https://img.fasttechcdn.com/964/9649469/9649469-1.jpg POM Nero https://img.fasttechcdn.com/964/9649470/9649470-1.jpg Materiale: PEI (SKU 9649469) POM (SKU 9649470) Colore: Marrone chiaro traslucido (PEI), Nero opaco (POM) Altezza totale DT (Total height): 11.35mm Altezza inserto 510 (Base height): 5.0mm Diametro inserto 510 (Base outer diameter): 8.5mm Foro inserto 510 (Base inner diameter): 4.9mm Foro superiore DT (Bore diameter): 4.9mm Forma: Uno 'stubby' molto basso (sporge di 6.35mm.), ben isolante, con doppio o-ring nero da 1mm. (forse da 8x6x1mm. installati su sede da 7mm.) con buona tenuta. Con un foro da 4.9mm. è adatto al MTL arioso o al flavour, o - al limite - al tiro polmonare ristretto. Impressioni (IMHO): Il mio preferito su Hussar (ovviamente) con il top cap standard se usato con configurazione da flavour (air pin 2.0mm.), ma adatto a parecchi atom MTL ariosi e da flavour. Ottimo sui BY-Ka (tutte le versioni), sui vari Kayfun 5, sullo Skyline, etc. Passabile anche sul Kayfun 3 Mini (un po' troppo "aperto" rispetto al camino). In pratica, su qualsiasi atom che abbia, per costruzione, già una base rialzata ove sia situato l'attacco 510. Per il costo, poi, val la pena di provarlo assolutamente. Photo: PEI https://img.fasttechcdn.com/964/9649469/9649469-1.jpg POM Black https://img.fasttechcdn.com/964/9649470/9649470-1.jpg Material: PEI (SKU 9649469) POM (SKU 9649470) Color: Translucent light brown (PEI), Matt black (POM) Total height DT (Total height): 11.35mm 510 insert height (Base height): 5.0mm 510 insert diameter (Base outer diameter): 8.5mm 510 insert hole (Base inner diameter): 4.9mm Top DT hole (Bore diameter): 4.9mm Shape: A very low 'stubby' (protruding 6.35mm. only), well insulating, with double 1mm. black o-rings (possibly 8x6x1mm. Seat diameter is 7mm.) giving a good seal. With its 4.9mm bore is suitable for (very) airy MTL or flavour RTAs, or - possibly - even for a quite restricted DL. Impressions (IMHO): My favorite on Hussar (obviously) with the standard top cap if used with flavour configuration (2.0mm. air pin), but is suitable for many RTAs. Excellent on BY-Ka (all versions), on the Kayfun 5 family, on the Skyline, etc. Just passable on the Kayfun 3 Mini (a tad too "open" compared to the atom's chimney bore). In practice it's good on any atom that has, by construction, a raised stub where the 510 connection is located. For its price, anyway, it's well worth trying it.

Photo: https://img.fasttechcdn.com/795/7954501/7954501-1.jpg Material: PEI Color: light to medium brown (PEI), which tends to slightly darken with time and use. Total DT height (Total height): 13.5mm 510 insert height (Base height): 5.5mm 510 insert diameter (Base outer diameter): 8.5mm 510 insert hole (Base inner diameter): 4.0mm Top DT hole (Bore diameter): 6.5mm Shape: A fairly low 'stubby' (protrudes 8mm), well insulating, with a double black o-ring (excellent grip) and with a 4mm hole. that in the upper third of the DT is flared conical up to 6.5mm. Impressions (IMHO): My favorite DT on several MTL and airy MTL atoms. Excellent on BY-Ka, Le Zephyr, Speed Revolution 18mm. and on the Skyline, of course! Fairly good on eXpromizer 2.x, etc. At around USD 1.35 apiece, then, it's a bargain! Foto: https://img.fasttechcdn.com/795/7954501/7954501-1.jpg Materiale: PEI Colore: Marrone da chiaro a medio (PEI), che tende a scurirsi con il tempo e l'uso. Altezza totale DT (Total height): 13.5mm Altezza inserto 510 (Base height): 5.5mm Diametro inserto 510 (Base outer diameter): 8.5mm Foro inserto 510 (Base inner diameter): 4.0mm Foro superiore DT (Bore diameter): 6.5mm Forma: Uno 'stubby' abbastanza basso (sporge di 8mm.), ben isolante, con doppio o-ring nero (ottima tenuta) e con un foro da 4mm. che nel terzo superiore del DT si svasa conico fino a 6,5mm. Impressioni (IMHO): Il mio preferito su parecchi atom MTL e MTL ariosi. Ottimo sui BY-Ka, su Le Zephyr, su Speed Revolution 18mm., discreto su eXpromizer 2.x, etc. E ottimo sullo Skyline, ovviamente. A circa 1,35 USD cad., poi, è un affare!

This is a really nice bottle, not too soft and not too hard: it's thicker then most of the "Super soft" bottles, and this gives the SJMY a very a nice return action. It's very good on the Frankenskull styled mods, but it's absolutely perfect on my YFTK Kimech styled box. Even "too perfect", actually. I, in fact, agree with other reviewers like TEFL0N_D0N_81 when he says that the bottle fits in with a remarkable (maybee even excessive) amount of friction, making refilling and - furthermore - refitting the bottle, a quite delicate and laborious task. Turning the bottle when removing or inserting it will actually do the trick, anyway, and after a couple of repetiions the task becames very straightforward. In the end, refitting my YFTK Kimech with this bottle it's well worth it: once fitted, it almost seems that the bottle is built-in into the mod, there is virtually no gap and/or movement, the silicone wall seems integral part of the mod's delrin body. Ihe looks are perfect, the action is perfect too, and the 6ml. capacity is exactly what I need between rewicking of my 18mm. atoms Amazing, really amazing.

I have seen some review that are quite critical of Coppervape single coil deck as an upgrade to SJMY Hussar RTA. But, too, I have noticed that many - like me - have had no problem with it. I actually bought it on August 2018, many months later than the people having issues, so maybe Coppervape corrected any issue in later batches of their deck (I have seen around comments about how they use to improve their products during production run). It's been a wonderful upgrade for my Hussar, because using single coil Coppervape deck with it's standard 2,0mm. airpin, I can have a very good flavour RTA (I use 26ga wire on 3mm. coils, in the 18-20W range). I also ordered for my Hussar a micro tank set SKU 7433200 and the 'Torpedo' cap SKU 7433100. With the said Coppervape deck and the 1,3mm. airpin SKU 7433000 I plan to have a perfect MTL atom for tobacco liquids.