shopping cart empty
Lyubo's Product Reviews
Sort:
Convoy S2 DIY EDC LED Flashlight Host
Convoy S2 DIY EDC LED Flashlight Host

Lyubo
Member

VERIFIED OWNER
  • JoinedDec 2012
  • Posts 78
  • Reviews 35
  • Kudos17
Overall   (4.7)
› Quality
› Value
3 of 3 people found the following review helpful
PROS
Very good flashlight host. Can be customized to your taste. Fits XM-L or XM-L2 LED and NANJG driver.
CONS
Heats very fast with current over 2 amps. Hard to solder driver board.
One of my favourite flashlight hosts. The kit includes all parts you need except LED and driver boards. I ordered more than 10 of these for me and friends. I like to equip them with XM-L2 on copper board and NANJG drivers flashed with custom firmware. It gives very nice smooth floody beam, so it's perfect for closeup work. I prefer 6xAMC7135 (current = 2.1 amps), but mostly using it on lower mode, about 0.5A. If you use driver with AMC7135 chips on both sides, like I do, it's very difficult to solder it on the pill. You need to solder it because double side boards will not fit with pill retaining ring.
Reviewed on Was this review helpful to you? Yes / No

Lyubo
Member

VERIFIED OWNER
  • JoinedDec 2012
  • Posts 78
  • Reviews 35
  • Kudos17
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
I like how it tastes. You can get this small bottle to try it and then order the 100 ml bottle.
Reviewed on Was this review helpful to you? Yes / No

Lyubo
Member

VERIFIED OWNER
  • JoinedDec 2012
  • Posts 78
  • Reviews 35
  • Kudos17
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
price quality capacity
Both batterys came at 3.85 volts. Data code on both: Q37A (37th week, 2012 i think). I tested one of them: charged to 4.20Volts (measured a couple of hours after charge) and discharged to 3.13 V (cannot discharge to lower voltage, the charger suck :( ) gave me 2510 mAh. I cannot test the other one because it was for friend.
Reviewed on Was this review helpful to you? Yes / No
Beam Light Diffuser for LED Flashlights
Beam Light Diffuser for LED Flashlights

Lyubo
Member

VERIFIED OWNER
  • JoinedDec 2012
  • Posts 78
  • Reviews 35
  • Kudos17
Overall   (3.5)
› Quality
› Value
1 of 1 people found the following review helpful
Simple diffuser made ​​of silicone (the description says "plastic"). It is flexible and this allows to fit flashlights of various sizes. I mount it on a flashlight with 22 mm diameter. The light coming out the front looks more yellow than without mounted diffuser, the light coming out the side - the blue.
Reviewed on Was this review helpful to you? Yes / No
57mm Smooth Plastic Reflector
57mm Smooth Plastic Reflector

Lyubo
Member

VERIFIED OWNER
  • JoinedDec 2012
  • Posts 78
  • Reviews 35
  • Kudos17
Overall   (3.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
cheap
CONS
not aluminum!
Еxpected to receive an aluminum reflector, not plastic as it is written. Average quality, no scratches. fits "FASTTECH SKU 1103511". The white plastic part of the LED sank in reflector about 2 mm. Unfortunately, there is no easy way to attach the LED to the reflector or the reflector to the radiator of the LED.
Reviewed on Was this review helpful to you? Yes / No