Lucifer_Dreams's Product Reviews
Sort:

Avatar
Lucifer_Dreams
Verified

VERIFIED OWNER
  • JoinedSep 2014
  • Posts 7611
  • Reviews 96
  • Kudos8377
Overall   (5.0)
› Quality
› Value
PROS
Large Bore Drip Tip. 510 Drip Tip Adapter. Easy to Build. Takes All Types of Coil Gauge. Solidly Made
CONS
None
What can I say about the Fat Man. It is what it is, nothing pretty but what you want. Something to very quickly build upon and use right away. It is really nice to just do what RBA is really made for, really. Holes are large, screws are good. Center post seems much better than the Little Boy. I have that one as well. I don't have to screw around with making sure I have this wrapped right or if I have put in the cotton in such away or this way to have a good experience using it. It is just build it, use it. You know you haven't showered in a week, who cares. Just pick up the Fat Man of Grunge and plunge into a good warm vape with flavor and clouds. Etching is good on the side. Doesn't seem to get hot like other atomizers when you put the fat gauge wire in. If your looking for an easy build, don't want to fart with all the frills of vaping. Look no farther. Everyone needs love even a Fat Man. Get one today and show being Fat is Okay.
Reviewed on

Avatar
Lucifer_Dreams
Verified

VERIFIED OWNER
  • JoinedSep 2014
  • Posts 7611
  • Reviews 96
  • Kudos8377
Overall   (5.0)
› Quality
› Value
PROS
Small size that fits well in the hand. Well made. Good battery sled, easy to put and take out the batteries. Fire button has good click to it. Doesn't feel cheap.
CONS
None so far.
Just got it so it will take awhile to see how well it stands up. Sorry have to be honest. It is not cheaply made at all. Easier to put batteries in and take them out compared to the Tesla Invader III. Not that I don't mind the Tesla Inavder III still use it daily. Just doing a little comparison. Right now using the Advken CP with 26 gauge wire at .50 ohms. Have it turned up to almost half way and the power is spot on. Do notice a millisecond pause before power. Very, very slight. I am sure that has to do with the protection is has in it. It can be lived with. It is nice not having to crank something up to 140 watts just to use a .50 ohm coil. Being 280W maybe but that is okay as well because it is not the watts that counts but the ability to heat the coil up quick with lower watts. I would say because of the build of the case and the chipset in it the VV Mod will hold up for a long time.
Reviewed on

Avatar
Lucifer_Dreams
Verified

VERIFIED OWNER
  • JoinedSep 2014
  • Posts 7611
  • Reviews 96
  • Kudos8377
Overall   (5.0)
› Quality
› Value
PROS
Very light, very. Well made, for such a small box mod. Oled very bright and readable. Low profile battery cap. Clean. Smooth finish on the Funky case.
CONS
Takes a little while to get use to the fire button. Not bad, just different.
Working with a smaller mod you have to think differently when it comes to the button. A firm press for the fire button is required but not bad to have that occur. The fire button is not one to wear out because of the firmness given on the press. Very responsive when press. Power given. Manual is small print. Use a magnifying glass to read. Not hard to work through the menu. Just will need to get use to it. Learning curve less than a half hour to feel comfortable. Light in the hand. Not an ergonomic design since it is in box shape but the coating of the box makes up for that. Very soft feel to it when in hand. The tank that comes with it is a good size and low enough profile. Hits well with the included coil. I also got the Teslacigs the Carrate 24 to use with it. Since the Teslacig Carrate is 24mm you would think it wouldn't look right on the deck of this mod but it does and fits really well. You could say it was almost designed to go with it. The machine design on the Carrate 24 matches the battery cap close enough to make it look like a match. Small profile tank if you want something good and stealth for a mod. SKU 5410600. Color design is good. Mixed yellow/green to a rich blue green. Funky design. I am glad it wasn't shine coated because that might of been bad for the wear factor. If it wasn't coated right it could be bad. I would rather look into a coating that will work with the Funky that I know I can correct if needed when it wears. Beats Pico and it is cool or maybe not cool but Funky. Recommended for the miniature stealth crowd. Does 24mm really well.
Reviewed on

Avatar
Lucifer_Dreams
Verified

VERIFIED OWNER
  • JoinedSep 2014
  • Posts 7611
  • Reviews 96
  • Kudos8377
Overall   (5.0)
› Quality
› Value
PROS
Top Fill Easy to Wick Good quality. Threads could be smoother. That is why it is a good not great.
CONS
None
No issues with building. Easy to use with mess. Nice having the top file. Still can remove the base with the tank full. Air flow control ring is spot on. No having to keep adjusting it because it is always on the move. Flavor is great. Good for MTL. Little condensation on the outside of the air holes. Not a big deal. No leaks for me and I believe it will be the same for you. Comes with mess for wicking assistance. Load it up and let your tongue taste the flavor.
Reviewed on

Avatar
Lucifer_Dreams
Verified

VERIFIED OWNER
  • JoinedSep 2014
  • Posts 7611
  • Reviews 96
  • Kudos8377
Overall   (5.0)
› Quality
› Value
PROS
Well made. Smooth as butter threads that you can expect from a Billow Tank. Easy to build single coil RBA deck that comes with the Tank. Good 510 section that can fit the screw in expansion screw for other types of atomizer you want to Morph into. No stinking oil smell, none, na da, clean as Whistlers Mother after a long bath.
CONS
None, damn thing really doesn't leak.
Even if you don't buy the adaptors you won't be disappointed. It is almost what you can call a Billow 3. Very well made and easy to assemble. No top fill which is fine all the air pressure goes out properly when you fill. Don't have to worry did I remember to close the air flow control or not. Just fill the damn thing, connect and go. If you put this together and it leaks on you, stop vaping go back to smoking. I knew this was going to be a good tank. What I like about it is that you have a screw on chimney sides but no top chimney cap to worry about screwing on, losing it. The chimney sides do screw down and is easy to unscrew from the deck. Juice channels in the base feel the wick pretty well and also allow for thick wicking. I went to the extreme, had to see what it could take. I used 3.5 mm diameter coil, 6 wraps, 24 gauge. My ohms came in at .80. Not to hot, not to cold, just right for Brown Sugar/Toasted Marshmallow flavor DIY juice. Yes, I feel like a fly today. When I first got it not using any intelligence at all I built my coil. I put it on one of my 26650 mods to you know pre-heat the coil. Nothing happened, I thought what now, did I buy a lemon. I put it on the ohm meter, nothing. I knew right then no connection some where. I saw the inner pin sticking up far enough, though that couldn't be it. Took it all apart and still couldn't figure it out, it seem like it should just work. Now here comes the helpful hint I hope and this can be applied when you use the adaptors if you bought them. I assemble everything back again. Made sure the air flow was open and held it up to the light. Sure enough the extra center pin was a hair off from touching the base. Took the small 510 screw out then made an adjustment to the second recess screw to butt it up against the RBA base an bam thank you mam it worked. So if in doubt whip it out at the light and make the last adjustment to the recess screw. It comes short in distance from the factory. No big deal, you should know your equipment you are using. What I like about the Morph is there still more to explore with the other adaptors. If I get bored with the single RBA base that comes with it, hell I can try something else. At least I can use my Billow style tank to try it out. Sorry when you have a good tank like the billow why bother trying out what someone else tries to design and not make it right. The Billow tank is put together well and this Morph tank is just like it. Yes it does have the Harry Potter lightning bolt on it. I guess it was to keep the British happy. Hope to have photos soon. Work 14 hours today, don't feel like popping out the camera. Just vape with flavor and relax, it can't be any better than that.
Reviewed on