shopping cart empty
JessVapin's Product Reviews
Sort:

Avatar
JessVapin
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 8551
  • Reviews 82
  • Kudos22300
Overall   (5.0)
› Quality
› Value
16 of 16 people found the following review helpful
PROS
Build quality Light in hand Looks sexy (imo) Great switch feel DNA75 Supersoft bottle As compact as an 18650 gets imo Panel fitment is perfect with no movement at all Battery slips in without drama A very good 1:1 clone of authentic Reverse threaded 510
CONS
If your atty has a really short 510 as you raise the mods 510 it gets wobbly towards the end of the threading. (I put oring on mine) all my other rdas work fine.
The big question...is it worth $89?... IMO yes. A big yes. This is a very nice mod for the money. I sold my HCigar VTinbox, i just didn't like it that much. This mod on the other hand is everything i had been looking for. If you're looking for this style squonker, i can recommend. =) ...have a question? Find me in sku's thread, I'll do my best to answer it BEFORE you spend your hard earned money. Happy Vapin! =)
Reviewed on Was this review helpful to you? Yes / No

Avatar
JessVapin
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 8551
  • Reviews 82
  • Kudos22300
Overall   (4.5)
› Quality
› Value
10 of 11 people found the following review helpful
PROS
many
CONS
few
This is going to be a long one, so I'll tell the impatient now that I recommend this device with enthusiasm as a standard 50 watt mod. Ordered this not for the temp control or bluetooth feature and have no comments on those aspects. But as a stand alone small 50 watt device in the $40 range this thing shines, brightly. First off I was literally amazed at the quality of this item, the fit and finish is impeccable. And the design although iStick'ish was well thought out with improvements. The screen bezel is attractive and the tiny raised bumps on bottom of mod to keep the shiny surface from scratching was an excellent forethought. The battery cover threading is silky smooth and easy enough to tighten without a coin, just finger pressure snugs it closed perfectly. It's a little smaller than a Sigelei mini, but feels a lot smaller in the hand. I attribute that to the rounding of the edges I suppose. Anti-scratch finish seems very durable and long lasting compared to other mod finishes I own. Buttons have a nice comfortable feel with great feedback, and do not emit any sort of rattling sounds when in use or violently shaken. Display is beautifully laid out and has a crisp clean not too bright or dim glow on it. Easy to read and informative. 510 is spring loaded and features stainless steel threads for longevity. All my longer 510 attys sit flush, and the shorter ones make complete connection also. The power comes on smooth and consistent without any rattlesnake sounds, and there is no delay from sleep. Fires immediately, which I for one love. Device is accurate as far as I could test, if it says it's putting out 4.4 volts it is. It steps down well too, If you vape a .5 at 10 watts you'll be happy with this, unlike the original iStick. Additionally if a .5 at 50 watts tickles your fancy you'll be just as pleased. You can reset the puff counter at battery swap to monitor lifetime if ya like. Screen flip is nice feature. Battery bar is very accurate, but below 15% it starts to struggle pushing more than 30 watts consistently down to the point you get the "low volt" message and will not fire. At which point the battery read 3.31 volts when put on the charger. Now the bad, which I'm going to have to dig deep for and some may be subjective. The screen printed logo is not appealing to me and I would have preferred it was not placed as it is. That tiny camera button is slightly raised and I feel it all the time but not an irritant by any means. Ummm... only 3 colors offered. Ummm... yeah. That's all I got.lol In the 50 watt mod class at around $40 It's really hard to beat imo. Really is a nice mod. Now if your looking for a temp control mod I'm sorry I have no info for you, but I will say that based on the rest of the mod I find it hard to believe that it wouldn't be as accurate or user friendly as it is in standard kanthal vaping mode. Sorry Eleaf, you've been out done by Sailing Technologies with this fine device. In fairness, Eleaf did start the ball rolling and Sailing just improved on that design ten fold. So if you're in the market for a small 50 watt device in the forty dollar range this is a slam dunk. And hey, you get temp control and bluetooth as a bonus! :) I will post photos of everything you receive, packaging, screen display, etc, in a thread to this item for you to check it out before laying down your brass. Hope this helped you make you're decision easier, and not harder. :P now go checkout the pics----->
Reviewed on Was this review helpful to you? Yes / No

Avatar
JessVapin
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 8551
  • Reviews 82
  • Kudos22300
Overall   (4.5)
› Quality
› Value
9 of 10 people found the following review helpful
PROS
Price flavor production vapor production included heat sink as a bonus Quality machining overall performance smooooth draw(and relatively quite) orings are properly sized 510 pin extends past threads coiling it high on posts provides for a bucket full of juice capacity
CONS
screws will clip wire if not filed down a bit
I haven't seen this nice of a clone in some time. The manufacturer really put some thought into producing this almost perfect rda. The little details really make a difference when it comes to a clone and this example shines. First the oring sizes are absolutely spot on. The deck oring is very snug and holds the chamber barrel firmly. Not so firm it's a pain to get on, but once on it holds tight. which is how it should be since removal of the chamber will not be done often on this design. The top cap oring is a bit more loose, as it should be also because of the removal frequency to drip. Not difficult to remove or replace, but holds nicely. Then the afc oring, it's the perfect resistance to hold the setting but loose enough to move the setting effortlessly. The design of the top airflow is great for a large juice capacity on this one. Coiled high on the posts this rda holds the most juice I've ever seen. No counting drops with this one, just aim, squeeze a good amount in it and it has reserve left after your vaping session. Haven't actually measured the capacity, but wouldn't be surprised if its over a 1.5ml. The overall quality is some of the best in clones. As others have said the screws are a bit sharp at the ends, but a quick scratch on some sandpaper or a file and you're good to go. The center post hole being a bit smaller than the negatives is a non issue in my eyes. This is not a competition atty for crazy builds so any standard build will mount trouble free. And it's no slouch in vapor production at a .4 for me with standard wrap dual micro coils. The included heat sink has a fixed atty end pin but functions fine with this rda. I don't use it and think it's not needed as the heat is generated at the top on this one not the bottom. It officially has bumped my #1 22mm top airflow rda to second. (That was the Rogue) So what you get for your less than $10 (which is a steal) is a great looking, top performing, quality built Aeolus clone that provides an excellent vape. Get two, it's that good. :)
Reviewed on Was this review helpful to you? Yes / No

Avatar
JessVapin
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 8551
  • Reviews 82
  • Kudos22300
Overall   (5.0)
› Quality
› Value
6 of 6 people found the following review helpful
PROS
It's a useless box.
CONS
It's a useless box.
A bit disappointed in this product, it's supposed to be useless but every time I take it out friends and family find it useful in creating something to talk about, laughs, memories, inquiries about where I got it, and a host of other things. So, for a useless box, which is what I was wanting, it came with many uses. Two thumbs down. =P
Reviewed on Was this review helpful to you? Yes / No

Avatar
JessVapin
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 8551
  • Reviews 82
  • Kudos22300
Overall   (4.5)
› Quality
› Value
5 of 5 people found the following review helpful
PROS
MANY- Bypass mode is legit. Solid build quality. Secure and quiet battery door. Crisp, informative screen. Button feedback is excellent. Feature rich. (Subjectively)Looks and shape. Feels great in your hand. Comparatively a bit lighter feel than other minis I have. General functions,lock,stealth,etc. Fire button placement.(I prefer switch on same side as 510) PRICE!
CONS
NOT MANY- (Subjectively)Not actually white,but pearlescent hue white. Long pinned attys leave a gap.
Said most comments above. I deducted points because my favorite atty leaves a gap.(Aeolus)And any other long 510 pin devices do too. But not much negative to say about this mod, regardless of it's price. Which is a bargain imo. I like it so much I'm getting a black one now also. I've left some pics in a thread of what you receive. go check it out-------> =)
Reviewed on Was this review helpful to you? Yes / No