shopping cart empty
Jartaine's Product Reviews
Sort:

Avatar
Jartaine
Member

VERIFIED OWNER
  • JoinedMay 2014
  • Posts 71
  • Reviews 97
  • Kudos28
Overall   (5.0)
› Quality
› Value
4 of 4 people found the following review helpful
PROS
Build quality Performance Price
Seriously, this is a very good RTA. The build quality is competitive with the "authentics". Threading of the top cap is velvety-smooth, O-rings have just the correct amount of tension. No sharp corners and deck screws are solid. The air flow holes are not the same on both sides. You can set equal size and number holes on both sides or have 1 or 2 holes open on just one side for a very tight draw. Nice options for customizing to your preference. The drip tip is used to adjust the juice control. But, if you want a tighter draw you can insert another drip tip in the drip tip (not all of mine would fit but the GT II drip tips will and the Fodi drip tips also). One tip: when refilling, after you close the juice ports, remove the drip tip before unscrewing the top cap. Do this to prevent accidental opening of the juice ports.
Reviewed on Was this review helpful to you? Yes / No
Hadaly Styled RDA Rebuildable Dripping Atomizer
Hadaly Styled RDA Rebuildable Dripping Atomizer

Avatar
Jartaine
Member

VERIFIED OWNER
  • JoinedMay 2014
  • Posts 71
  • Reviews 97
  • Kudos28
Overall   (5.0)
› Quality
› Value
3 of 3 people found the following review helpful
PROS
Fit construction finish
CONS
none
I have the authentis and also the SXK clone. This one is a good clone. O-rings have good tension and screws secure clamps well. 510 pin really isn't adjustable, can be taken out for the included squonk pin.
Reviewed on Was this review helpful to you? Yes / No
Origen OT22 Styled RDTA Rebuildable Dripping Tank Atomizer
Origen OT22 Styled RDTA Rebuildable Dripping Tank Atomizer

Avatar
Jartaine
Member

VERIFIED OWNER
  • JoinedMay 2014
  • Posts 71
  • Reviews 97
  • Kudos28
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Build quality Price Performance
CONS
None
Awesome flavor RTA. Single coil build typically, dual coiling would be a waste of time and no benefit. I wick by goinig through the coil, tuck ends under the coil and back to fill the deck. Trim and place a small amount of cotton under the wicking to help prevent flooding when refilling. Basically the coil is sitting in a bed of cotton. Notice when you do the initial cleaning that water flows out the tubes without the top cap on. With the top cap, no dripping. I believe, as the cotton dries during a vape, it pulls the ejuice from the tubes. Only con is that you can't waste time during the refilling. Mouth to lung to maybe a restricted lung hit atty. It's been awesome with TC builds. Mine has good O-rings. No problems carrying in my pocket. Air flow ring O-ring is just right in tension, can adjust air flow easily but not loose. Drip tip well is shallow but the Hcigar Fuji drip tips SKU 4045106 fit perfectly. Kayfun V4 replacement glass can be used.
Reviewed on Was this review helpful to you? Yes / No
Replacement Air Flow Control Valve Base for SUBTANK Mini Clearomizer
Replacement Air Flow Control Valve Base for SUBTANK Mini Clearomizer

Avatar
Jartaine
Member

VERIFIED OWNER
  • JoinedMay 2014
  • Posts 71
  • Reviews 97
  • Kudos28
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
threads fit
CONS
none
Works fine. Threading is fine for tank and 510 connection. Airflow adjustment ring moves smoothly.
Reviewed on Was this review helpful to you? Yes / No
Replacement Air Flow Control Valve Base for SUBTANK Mini V2 Clearomizer
Replacement Air Flow Control Valve Base for SUBTANK Mini V2 Clearomizer

Avatar
Jartaine
Member

VERIFIED OWNER
  • JoinedMay 2014
  • Posts 71
  • Reviews 97
  • Kudos28
Overall   (2.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
threading ok
CONS
paint
There are better Mini base clones. The paint is chipping off on this base and there was paint everywhere, even on the 510 threads. Also the base came apart at the first tank refill so I now have to find some lock-tite suitable for electric applications to keep it together. (regular Lock-tite will interfere with the negative part of your 510 connection).
Reviewed on Was this review helpful to you? Yes / No