shopping cart empty
Inkitatus's Product Reviews
Sort:

Avatar
Inkitatus
Member

VERIFIED OWNER
  • JoinedNov 2013
  • Posts 6808
  • Reviews 179
  • Kudos6853
Overall   (4.7)
› Quality
› Value
1 of 3 people found the following review helpful
PROS
Easy build Portable Good vape
CONS
Not as well made as earlier Now plated brass not stainless steel
Bit of a backward step here, my 3rd one of these- other two are stainless steel, now plated brass & now the air hole doesn't line up with the wick without some work. Be careful not to screw live post top screws too tight as this leads to shorting very easily. Used the supplied mesh with my own flat ribbon coil at 2ohms on my cool fire 2 makes for a flavorful satisfying vape. Again super value for money compared to ebays protanks & vivi novas,but not quite as good as previous manafacturers efforts purchased from Fasttech. Overall, still recommended tho. Thankyou Fasttech
Reviewed on Was this review helpful to you? Yes / No

Avatar
Inkitatus
Member

VERIFIED OWNER
  • JoinedNov 2013
  • Posts 6808
  • Reviews 179
  • Kudos6853
Overall   (5.0)
› Quality
› Value
0 of 1 people found the following review helpful
PROS
Mine are Stainless steel Very good quality,will be durable Screw on top,portable Easy build Damn fine vape!
CONS
Vaping's best kept secret!
o at last I've found what I've been searching for since I started vaping:- a solidly made stainless steel tough,robust truly pocketable portable genesis style atomiser that honestly performs well! And delivered to Blighty for under £5? Wow! Didn't need any cleaning (no machine oil residue). Used half (lengthways) of the stainless mesh (500g?) Wick,& 7 wraps of 1.2mm flat ribbon kanthal wire to give 1.18ohms,& it Vapes 100% VG @ 7watts perfectly! Much over 8.5watts & the skinny wick struggles to keep up,but I did a slender wick so I could leave the fill screw in to avoid any potential leeks. + at lower wattage my 18350's last longer,adding to this atty's "out & about" appeal. Tank volume is spot-on,an ideal compromise between lasting long enough & lasting too long. Perhaps a pyrex tank would be an improvement? Airflow is just right for me,fairly tight, & tho the air hole could easily be drilled out I feel this could make this a potential weak spot for leaks. Overall just the job for the out&about genesis user.
Reviewed on Was this review helpful to you? Yes / No

Avatar
Inkitatus
Member

VERIFIED OWNER
  • JoinedNov 2013
  • Posts 6808
  • Reviews 179
  • Kudos6853
Overall   (4.5)
› Quality
› Value
0 of 1 people found the following review helpful
PROS
How do Fasttech sell + deliver this so cheaply!?
CONS
None for the price!
Does exactly what it says. Not high end quality but that's not expected at this price. Perfect for decent snaps,tho a steady hand is required as with all zooms,but ideal size & weight to put in a pocket & carry around & not worry about breaking summit expensive. In summation, an absolute bargain Thankyou yet again Fasttech for your outstanding value for money!
Reviewed on Was this review helpful to you? Yes / No

Avatar
Inkitatus
Member

VERIFIED OWNER
  • JoinedNov 2013
  • Posts 6808
  • Reviews 179
  • Kudos6853
Overall   (5.0)
› Quality
› Value
0 of 1 people found the following review helpful
PROS
Well made. Bargain.
CONS
None
If you like the style you will be very pleased when it arrives. Beautiful machining good heavyweight construction. Faultless. Highly recommended you won't be disappointed. Won't take a kick due to small internal tube size,but is shorter than my smok Galileo + far better made. Love it!
Reviewed on Was this review helpful to you? Yes / No

Avatar
Inkitatus
Member

VERIFIED OWNER
  • JoinedNov 2013
  • Posts 6808
  • Reviews 179
  • Kudos6853
Overall   (5.0)
› Quality
› Value
0 of 1 people found the following review helpful
PROS
Turns cheap mech mod into vw
CONS
No
Recommended bargain. Won't fit Maraxus,but works well in other mechs.
Reviewed on Was this review helpful to you? Yes / No