ImCannibal's Product Reviews
Sort:
Serisvape Bathala Mechanical Mod
Serisvape Bathala Mechanical Mod

Avatar
ImCannibal
Verified

VERIFIED OWNER
  • JoinedFeb 2018
  • Posts 51
  • Reviews 30
  • Kudos25
Overall   (4.0)
› Quality
› Value
PROS
Price, Materials, Constant Contact Switch, Cerakote, Threading, Appearance
CONS
crunchy button
If you're trying to get a decent tube mech on a budget, this is right up there with some of the styled 21700 mech tubes but it's authentic and at the same price point. Full copper construction, constant contact switch, cerakoted body, decent esthetics. I only have 3 complaints, the bezel around the button is kinda sharp, and the engraving on the button material itself is a crud magnet, and the button is kinda crunchy. Overall, a decent mech for us penny pinchers out there.
Reviewed on
Skullvape POM Bell Cap for Oumier Wasp Nano RDTA (2-Pack)
Skullvape POM Bell Cap for Oumier Wasp Nano RDTA (2-Pack)

Avatar
ImCannibal
Verified

VERIFIED OWNER
  • JoinedFeb 2018
  • Posts 51
  • Reviews 30
  • Kudos25
Overall   (2.5)
› Quality
› Value
PROS
sturdy material, looks good,
CONS
fitment
TL;DR You have to put floss under the o-rings of your nano variants(authentic and styled) if you want these caps to stay on. FT also gave me an unsolicited warranty refund. These fit too loosely on both the styled and authentic Wasp Nano variants. Not loose enough that a fatter o-ring will fix it, and not tight enough to stay put on the atty. The OD of an authentic Wasp Nano RDA is 0.785", while the OD of the o-ring grooves is 0.730" and the o-rings are 0.035" thick and very malleable being silicone (these measurements, surprisingly, showed to be the same for the o-ring grooves on the styled rdta 9673226 and a clone Nano rda from elsewhere which use plain rubber o-rings of the same size). The ID of the Skullvape Bell Caps are 0.810". Meaning: there is a 0.010" gap (+/- a thou) between the factory o-rings of an authentic Wasp Nano RDA and the Skullvape Bellcaps, which if I realllllly wanted to ham fist I could use the old mechanics trick for fuel injector o-rings and put some floss under the o-rings. That isn't what I paid for though, I paid for caps that are supposed to fit right out of the box, which they don't. That's somewhat of a petty nitpick on my part for such an inexpensive set of topcaps, however it is still the truth. My previous review was rejected "because it conflicts with one or more of the review writing guidelines", which I have now amended with more detail in order to assist other potential consumers in making an informed decision prior to purchasing. FT also offered me a warranty refund for the items after I made a ticket to inquire about replacement o-rings to make these fit (instead of just giving me an o-ring sku).
Reviewed on

Avatar
ImCannibal
Verified

VERIFIED OWNER
  • JoinedFeb 2018
  • Posts 51
  • Reviews 30
  • Kudos25
Overall   (3.0)
› Quality
› Value
PROS
price, tons of build space
CONS
parts fitment, airflow, looks cheap,
You know that truck your friend had when you were a teenager that seemed to be on the verge of falling apart but always got you where you needed to go? This RDA is like that truck. The build quality is awful, the positive AND negative terminals wobble no matter how much you tighten them. Adjustable airflow? Nah, you don't need to adjust your airflow bud, you just leave it WIDE OPEN for clouds-bro-clouds action. Will this stealth vape? No way bud, clouds-bro-clouds. Will the chuff cap get hot? No, its paper thin plastic, you'll know it got hot when it cracks. Will it fit 4mm coils? Oh yeah, brother. Will it look like the cheapest piece of vape gear you own? Most definitely.
Reviewed on
ST Kabuki Styled RDA Rebuildable Dripping Atomizer
ST Kabuki Styled RDA Rebuildable Dripping Atomizer

Avatar
ImCannibal
Verified

VERIFIED OWNER
  • JoinedFeb 2018
  • Posts 51
  • Reviews 30
  • Kudos25
Overall   (4.5)
› Quality
› Value
PROS
size, easy to build, single coil, afc, price, fitment, looks
CONS
no drip tips
This little rda is pretty rad. Though you could technically put a dual coil build on the deck, a nice long single coil (I mean 8+ wraps) is where this shorty really shines. the airflow is simple, the cap is easy to take off for dripping into the shallow and wide as heck juice well, and the posts are far enough apart to handle a 4mm single coil no problem (bigger coil = more cotton = more juice capacity). The 24mm diameter paired with only being 24mm tall (not counting the threads) means it looks pretty small on a bigger dual battery mod, but actually looks pretty legit with something like a smok v8 stick. The threads are decent on the grub screws and surprisingly smooth on the 510. At the price, I would definitely recommend throwing one in with an order, possibly multiples if you want to have a few drippers going at once. My only complaint is that the "drip tip" wont fit any standard size tips. An 810 is too big and 510 is too small. An adapter for each size would put this little rda on a whole new level.
Reviewed on

Avatar
ImCannibal
Verified

VERIFIED OWNER
  • JoinedFeb 2018
  • Posts 51
  • Reviews 30
  • Kudos25
Overall   (4.5)
› Quality
› Value
PROS
Size, Looks, Construction materials, Airflow, Price, Compatibility,
CONS
Stock coil availability, rba
Outstanding little unit IF you grab yourself a dotshell rba for it. The stick coils leave something to be desired, and aren't plentiful. The rincoe rba for the stock tank is, frankly, doodoo... BUT if paired with a dotshell, the Manto AIO has been keeping up with both my BB Styled boxes with no issues. The airflow cutouts are sufficient for a decent Direct Lung draw like any BB bridge with wide open airflow. 10/10 would buy again.
Reviewed on