Gahhh's Product Reviews
Sort:
510 to eGo Adapters (5-Pack)
510 to eGo Adapters (5-Pack)

Gahhh
Verified

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 0
  • Reviews 86
  • Kudos0
Overall   (5.0)
› Quality
› Value
PROS
Very clean threading & contacts
CONS
NONE
I started vaping using the eGo batteries & tanks. If you wanted to find the ohms on the coil in an eGo / EVOD tank, having these 510 to eGo adapters made it easily possible on any 510 threaded mod that could read ohms. Since the newest crave for high mg nic salt ejuice started, all the AIO mini vape sticks/pens are becoming popular. But they don't surpass the vape quality of the early eGo / EVOD tanks. Getting back into those tanks really helps to stay off cigarettes. And if your using the eGo/Evod tanks your going to want to have a bunch of these connectors around.
Reviewed on

Gahhh
Verified

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 0
  • Reviews 86
  • Kudos0
Overall   (5.0)
› Quality
› Value
PROS
Works great.
CONS
Could be 4mm instead of 5.
If your into re-building most stock coils that are to be thrown away, you have to give these notch coils a try. They work great when rebuilding a single whole coil ( as like a Smok coil.) They can be used over and over again with careful attention taken when removing it to re-wick with new cotton. A simple lighter torching it will clean it and it will be as new again.
Reviewed on

Gahhh
Verified

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 0
  • Reviews 86
  • Kudos0
Overall   (5.0)
› Quality
› Value
PROS
Great price.
CONS
NONE
Many long time experienced vapers know that these type of submerged coils don't get the best flavor. Some other Replacement Joyetech coils I've used did not work so well, and a couple didn't work at all. With the cotton not being positioned right, some coils cause the draw to be to tight. These coils work well in my Joyetech AIO mod. They can easily be re-built using NR-R-NR coil wire. For anyone who experience a new XFKM BF coil that seems to be clogged, carefully remove the bottom positive pin and with a tiny screw driver, push the cotton up an eighth of an inch to allow the air to be drawn in and up through the coil.
Reviewed on

Gahhh
Verified

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 0
  • Reviews 86
  • Kudos0
Overall   (5.0)
› Quality
› Value
PROS
Top material.
CONS
NONE
There's many different brands and types of cotton to use for your coil building hobby, but you will get a cleaner taste with AOLVAPE cotton. The packaging this cotton comes in is a foil, zip sealing bag. Most brands come in a simple plastic bag. The flavor is what all vapers want, and this cotton won't disappoint you.
Reviewed on
Eleaf GS Air Replacement Pure Cotton Coil Head (5-Pack)
Eleaf GS Air Replacement Pure Cotton Coil Head (5-Pack)

Gahhh
Verified

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 0
  • Reviews 86
  • Kudos0
Overall   (5.0)
› Quality
› Value
PROS
Price is right.
CONS
Not as good as the .75 ohm coil.
These coils fit the GS Air 2 tank, but they lack the bit more flavor and kick you get from the .75 ohm coils that come with the Eleaf Basic Kit. Not recommended for re-building, yet they can be re-built. With the bottom insulator out, slide a small screwdriver in on an angle and tap the top coil head cap off. When re-setting the cap back on, use washers that fit a bit bigger than the coil top hole, ( remove silicone seal around top hole ) and with a couple of stacked washers in place squeeze top cap back in place using a mini, rubber padded, trigger operated clamp. I'll be waiting for the welded NR-R-NR .8 ohm wire to come from Fast Tech for a build that should be on target with the .75 ohm coils. If a Fast Tech Employee is reading this,,, maybe you can find out about where the .75 ohm coils that come with this tank can be found, and get them listed on Fast Tech.
Reviewed on