FrankieS's Product Reviews
Sort:

Avatar
FrankieS
Member

VERIFIED OWNER
  • JoinedDec 2014
  • Posts 728
  • Reviews 211
  • Kudos352
Overall   (5.0)
› Quality
› Value
PROS
Very Well Made! Thick, heavy metal section. Nice grade stainless. Very thick and tough ceramic section. Wide ceramic tips make it easy to squeeze and handle coils.
CONS
Ceramic section is too short and can be longer.
These tweezers are very reasonably priced and are a dream for anyone that loves to wrap coils! Very well made ergonomic tweezers with almost no heat transfer to hands. The ceramic tips are very thick and hard to break when handling heavy jobs. These tips are linked to metal parts with conventional screws and can be replaced, should they break. Spare tips can be purchased here. The metal sections are welded together very well. Highly recommended.
Reviewed on Was this review helpful to you? Yes / No

Avatar
FrankieS
Member

VERIFIED OWNER
  • JoinedDec 2014
  • Posts 728
  • Reviews 211
  • Kudos352
Overall   (5.0)
› Quality
› Value
1 of 2 people found the following review helpful
PROS
Well sealed. Well designed. Thick needle works with thick juice.
CONS
None.
Highly Recommended. Very practical for Vaping fans. The needle thickness makes it practical to handle any type of juice thickness.
Reviewed on Was this review helpful to you? Yes / No

Avatar
FrankieS
Member

VERIFIED OWNER
  • JoinedDec 2014
  • Posts 728
  • Reviews 211
  • Kudos352
Overall   (4.5)
› Quality
› Value
PROS
Well designed and balanced. Good quality metal. Smooth threads. Fits my original Kayfun Light Plus and all my clones.
CONS
Micro chips on glass. Red seals.
If you care for the glass tank, it does improve the classic Kayfun Light Plus and give it a high tech look. The glass has small chips where it links tto metal. Too small to effect performance, but still noticeable. Well designed and priced. I recommend it to anyone wanting to upgrade and improve their Kayfun.
Reviewed on Was this review helpful to you? Yes / No

Avatar
FrankieS
Member

VERIFIED OWNER
  • JoinedDec 2014
  • Posts 728
  • Reviews 211
  • Kudos352
Overall   (5.0)
› Quality
› Value
PROS
High quality. Threads all match Kayfun and clones. Well Designed and balanced weight. Well Priced.
CONS
Not noticed.
Received the product well packaged. The product is well made with quality materials. It's lighter than the original kayfun top cap and reduces the tank weight. Works with my original Kayfun Light Plus, Russian and all my clones. Highly recommended.
Reviewed on Was this review helpful to you? Yes / No

Avatar
FrankieS
Member

VERIFIED OWNER
  • JoinedDec 2014
  • Posts 728
  • Reviews 211
  • Kudos352
Overall   (4.2)
› Quality
› Value
0 of 1 people found the following review helpful
PROS
Excellent Design Excellent Quality Excellent Flavor Made of Titanium Alloy Very Lightweight Easy to Build Two Titanium Drip Tips Wide AFC Range Included Glass Tank
CONS
Strong Machine Oil Traces Terrible Included O-Rings Poor Glass Tank Fit Leaking
This tank is a great flavor chaser. Being made from titanium, it's very light. It's also very well designed and easy to Build with a lot of room for flexibility. It has a very nice AFC and JFC design that makes this tank a very capable flavor chaser, which produces moderate amounts of Vaper. Unfortunately, at the least, the one I received, had a very strong smell of oil out of the box, and required extensive cleaning before it became usable. It also has some serious flaws with improper size o-rings that caused leaking: bad enough to make it too unstable to take out as an everyday tank. It specifically had very bad o-rings holding the tank at the top and the bottom. The tank was completely loose. So, I replaced the too wide/too loose top o-ring, with two o-rings. An inner small diameter o-ring sitting near where the chimney is screwed to the top cap, and another larger ring along the outer rim of the top cap, so the two would pinch and hold the glass from both sides, at the top as it is meant to be with one o-ring, for filling. The o-ring under the deck is also too small, and does not fully seal the tank, causing slow leaks. Unfortunately, it's an odd size, and among all my tanks, spares and Home Depot inventory I have not yet found one the fits properly. I will update this review if I ever can. It is because of this slow leak, I am reluctant to take this tank out of my home and just use it as a desktop vape machine. It is a real pity, because the parts of this tank are top notch and the tank itself is one hell of a great flavor chaser with restricted both MTL and DL draws. If we consider only the fit and finish of parts of this tank, it will get the highest marks. But unfortunately with o-rings also being the necessary parts of this tank, I have no choice but to subtract a few points. I still do recommend this tank based on quality and performance. Recommended.
Reviewed on Was this review helpful to you? Yes / No