shopping cart empty
FrankieS's Product Reviews
Sort:

Avatar
FrankieS
Member

VERIFIED OWNER
  • JoinedDec 2014
  • Posts 711
  • Reviews 211
  • Kudos343
Overall   (5.0)
› Quality
› Value
PROS
Perfect threads Very high quality
This copy will fit the original. It's very well made and the material quality is very high. After months of use, there's no sign of liquid wear or oxidization. Highly recommended.
Reviewed on Was this review helpful to you? Yes / No

Avatar
FrankieS
Member

VERIFIED OWNER
  • JoinedDec 2014
  • Posts 711
  • Reviews 211
  • Kudos343
Overall   (4.5)
› Quality
› Value
PROS
Good quality Can be used to build your own Kayfun style tank Nicely threaded, screws are tight Good insulation quality Well priced
CONS
Lots of metal shreds, needs good wash, clean and wipe Was not polished after manufacturing, lots of sharp edges Not a good choice for mouth to lung hitters
Received the product in the usual excellent packaging. Product did not go through a good post production wash and polish. There are a lot of sharp edges and metal shreds, especially around and in between the threads. I recommend washing and then using a cloth to wipe all the threads to get any left over metal pieces out. The airflow control screw is under the device, opposite to the fill hole. I like the location, but depending on your preference, it could be a positive or negative point. Overall, it can very well be used as spare/replacement part(s). It can also be used to build your own cheaper dome style Kayfun if you combine it with one of a few bell cap kit packages sold by Fasttech. Overall, it's a good little part got the price tag, I do recommend it.
Reviewed on Was this review helpful to you? Yes / No
Acrylic 510 Drip Tip (5-Pack)
Acrylic 510 Drip Tip (5-Pack)

Avatar
FrankieS
Member

VERIFIED OWNER
  • JoinedDec 2014
  • Posts 711
  • Reviews 211
  • Kudos343
Overall   (5.0)
› Quality
› Value
PROS
Excellent build quality.
As pictured. Very smooth and clean edges.
Reviewed on Was this review helpful to you? Yes / No

Avatar
FrankieS
Member

VERIFIED OWNER
  • JoinedDec 2014
  • Posts 711
  • Reviews 211
  • Kudos343
Overall   (5.0)
› Quality
› Value
PROS
Excellent quality. Lots of included spare parts. Excellent quality copper springs. Copper 510 connector screw. Silicone Seals.
CONS
Lots of machine oil left in device. Sharp glass edges. Not a 1:1 Clone. Terrible looking silicon seals. Cheap box.
The positive: This tank has an excellent quality for the price. It is very well built. As you probably know, a big Kayfun v4 weakness is the low quality of the spring, which also works as a positive(Or is it negative?) lead. Low quality causes erratic resistance reading and overheating spring in SubOhm setups. Not this clone! This Kayfun comes with better than original copper springs (an extra spare) and a copper 510 connector screw!!! Another good thing is the seals are not rubber, but heat resistance silicon (or at least they look like silicon). The only problem is the red color of these seals I don't like. But that's subjective and you may very well like this color. And finally, there are a lot of spare parts included in the package. Now the negative: At time of unpacking, this RTA had a lot of machine oil and smelled terrible. A good wash was required to get rid of the stink. Also, the edges of the glass tank are sharp and not rounded like the original is. You could cut your fingers or crack the glass if you're not careful at the time of setting it up. And as good the quality is, it is obvious it's a clone. Especially, the manufacturer logo on the RTA, the copper 510 pin, and the red seals, easily gives it away. Something less relevant: the box looks like the original, but it has a cheap print and has less than perfect graphics and low quality seal. Overall, if you intend to show this RTA off or give it away as the original, this product is not for you. Neither is it for buyers that are looking for long lung draws and lots of air volume. But if you are looking for an excellent RTA with superb engineering and design, easy to fill, easy to clean, easy to work on even with a full tank, excellent flavor and good amount of vapor, you'll love this tank and enjoy a long time using it. This RTA is a great cake, and the low price is the icing on it!!!
Reviewed on Was this review helpful to you? Yes / No

Avatar
FrankieS
Member

VERIFIED OWNER
  • JoinedDec 2014
  • Posts 711
  • Reviews 211
  • Kudos343
Overall   (5.0)
› Quality
› Value
PROS
Well designed. Precision cut. Matching Driptip. Driptip and Topcap Doubling as Heat sinks.
CONS
Cut residues left between the plates. Oil left from cutting the Topcap. Little on the heavy side.
Received the device with a lot of steel dust and oil in between the radiator plates. After cleaning, the part looks beautiful, and the built precision becomes visible. The driptip, also, melts into the body and becomes a beautiful extension of it. A little heavy, so if you're installing on mods that hang from your neck, make sure the balance is right. Overall, highly recommended. I will buy again.
Reviewed on Was this review helpful to you? Yes / No