shopping cart empty
Elillc's Product Reviews
Sort:
Authentic Cloupor T6 7-100W Variable Wattage APV Mod
Authentic Cloupor T6 7-100W Variable Wattage APV Mod

Elillc
Member

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 88
  • Reviews 96
  • Kudos21
Overall   (4.7)
› Quality
› Value
4 of 4 people found the following review helpful
PROS
-affordable -pop and swap magnet battery cover -compact size: slightly bigger than Hana Modz -26650 battery last me whole day in Vapecon juice testing, and output around 900 puffs with a 3 seconds draw each time (@40 watts) -battery can be charge on both Intellicharger i4 and micro usb 1A in same amount of time
CONS
-I prefer Hana Modz clicky button, but I find some people like T6 button better -If juice leaked, it will go into the battery cover, but I would just pop the cover and wipe it off quick -Misfire- let's say if you pulling a long draw, for a half second it'll stop firing and start back up again. Happened once in a while. -510 connection adjustable pin/screw is wiggle, it might retract and you'll have a "check atomizer".
Overall I recommend to buy this. I know people worry about Cloupor's chip might have issues, but so far I find it more accurate/stable in ohm reading/wattage output compares to Hana Modz sold on Fasttech. For the temperature control/overheating protection, the highest I went up is 51 c (after a consecutive of 40 draws), and never had the chip shut down on me.
Reviewed on Was this review helpful to you? Yes / No
Nemesis Style Mechanical Mod
Nemesis Style Mechanical Mod

Elillc
Member

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 88
  • Reviews 96
  • Kudos21
Overall   (4.0)
› Quality
› Value
1 of 1 people found the following review helpful
Only I complaint is its finger print magnet, when are we getting nemesis with PVD coating?
Reviewed on Was this review helpful to you? Yes / No
Silica Wick for Rebuildable Atomizers (5M / 16.4ft)
Silica Wick for Rebuildable Atomizers (5M / 16.4ft)

Elillc
Member

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 88
  • Reviews 96
  • Kudos21
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
First of all, it's dirt cheap. Secondly, it's definitely made of high quality silica you can find on the market. How do I know that? I torch the shxt out of it, maybe for like 3~5 mins until my torch lighter went too hot, so I gotta stop. The result is amazing, it glows white and did not burn out at all. And the juice taste as what it should be with this wick. Unfortunately, I stopped using it because I discovers a better taste, easier to build , and "dust" cheap alternative - the cotton balls!
Reviewed on Was this review helpful to you? Yes / No

Elillc
Member

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 88
  • Reviews 96
  • Kudos21
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
well built, nice rubbery/plastic material, affordable,
CONS
the field of view is kinda narrow, and the objects appear to be more distance than it should
it does allow you to lay down while watch/read whatever, I definitely going to use this on the ship while laying down in my tiny "coffin-like" rack.
Reviewed on Was this review helpful to you? Yes / No

Elillc
Member
  • JoinedAug 2013
  • Posts 88
  • Reviews 96
  • Kudos21
Overall   (4.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
1. Beautiful and stylish, one of the best 2. Overall Build quality is great 3. Easy set up, A lot of room to rebuild single/dual/quad coils 4. Great RBA for sub ohm with minor modification required 5. Affordable price
CONS
1. Posts are weak, easy to break/chip off 2. Flat head post cap is easy to come loose 3. The thickness of top s.s. adjustable air holes cap, makes less room for air flow 4. Original o-rings are too big, make it hard to take things apart 5. Drip tip insert hole is small, will not fit most of standard 510 drip tips 6. Adjustable Connection pin will get push up (as well as the center post) if trying to get it flush on a mech mod, result in no connection and unable to adjust pin anymore 7. Will not sit flush on most mech mod
Overall I still love my trident mainly because how great it looks, and i will still recommend this beauty if you are willing to do some minor modification yourself. Some suggestions for the cons I listed: 1 & 2. Be careful with the posts, try to keep the flat head cap on. It's easy to loose and it provides protection for the posts. 3. Drill bigger air holes, especially for dual/quad coils. 4. Buy a 225 pcs o-rings kit from ebay or amazon for around $6. 5. Build or modify your own drip tips. Or keep searching for a right one. 6. Screw the connection pin out, push down center post, and Add a insulator/o-ring/washer that'll fit to make the pin pop out a little. 7. Depends on what mod you're using, I am using a KTS mech mod. Trident will sit flush if you screw it on first than do the battery compartment.
Reviewed on Was this review helpful to you? Yes / No