shopping cart empty
DomesticExtremist's Product Reviews
Sort:

DomesticExtremist
Member

VERIFIED OWNER
  • JoinedJul 2017
  • Posts 2
  • Reviews 16
  • Kudos0
Overall   (4.5)
› Quality
› Value
PROS
Lots of spares, incl two replacement tanks Well made over all Vapes nicely No leakage
CONS
Deck section Poor deck screws Airflow badly machined Long 510 pin
On the whole a nicely made tank with many spares. The deck section had a few issues - the airflow pin was not tapped correctly so that the adjustment screw would not screw in to close it off. For my style of vaping, I use it wide open anyway, but if you want a tighter draw, you are out of luck unless you order a spare e.g. SKU 4416500. The positive block is tapped a little cose to the edge, so may break if screwed in too tight. Deck screws are not great for trapping wire. The top cap has insufficient milling to allow pressure to escape when closing. The 510 centre pin protrudes quite a long way from the base, so great for mech mod safety, but leaves a gap when used on my other mods. Aside from these minor faults, the tank is well engineered and performs very well.
Reviewed on Was this review helpful to you? Yes / No

DomesticExtremist
Member

VERIFIED OWNER
  • JoinedJul 2017
  • Posts 2
  • Reviews 16
  • Kudos0
Overall   (4.5)
› Quality
› Value
PROS
Base easy to use Ample airflow Nice flavour Cheap as chips
CONS
Drip tip hole oversized Bottom filler
Bought as an order filler, but pleasantly surprised. The base is well machined and is as easy to work with as any Kayfun styled tank. Coiling and wicking is simple and problem free. Draw is unhindered and gives nice flavour with reasonable capacity. The 510 hole in the tank is slightly oversized making it difficult to find an alternative drip tip that fits snugly. The top cap is PMMA and I fear that the threads will eventually wear or get crossed at which point the tank will fail. A metal/glass combo would make a nice replacement (should such a thing exist). For MTL tape over one of the airholes for a perfect draw. For the money, a good tank for out and about that you don't have to worry too much about breaking.
Reviewed on Was this review helpful to you? Yes / No
Authentic Oumier Wasp Nano RDTA Rebuildable Dripping Tank Atomizer
Authentic Oumier Wasp Nano RDTA Rebuildable Dripping Tank Atomizer

DomesticExtremist
Member

VERIFIED OWNER
  • JoinedJul 2017
  • Posts 2
  • Reviews 16
  • Kudos0
Overall   (4.7)
› Quality
› Value
PROS
Build quality Value Easy to coil and wick Good for flavour
CONS
Not really for MTL Small tank Filling mechanism
Bought on pre-order due to good reivews for Wasp Nano RDA. All round it is good value, with spares and tools plus a glass replacement tank. Build quality is impressive and it is very simple to coil and wick. Filling is tricky as you need a needle nosed bottle, but the metal plate closes to prevent leakage. I am an MTL vaper and found that the airflow cannot be closed off completely or shut down quite enough for a nice MTL vape. Solved by taping over one of the slots, but even then it is a bit on the airy side. Given the small tank capacity it would be only so much use to cloud chasers due to the need to refill regularly. However, the flavour from this atty is excellent.
Reviewed on Was this review helpful to you? Yes / No
Kanthal A1 Heating Wire for Rebuildable Atomizers
Kanthal A1 Heating Wire for Rebuildable Atomizers

DomesticExtremist
Member

VERIFIED OWNER
  • JoinedJul 2017
  • Posts 2
  • Reviews 16
  • Kudos0
Overall   (4.5)
› Quality
› Value
PROS
Round Gives correct resistance for claimed guage
CONS
Reel nees a magnet to control despooling
Wire is good quality and yeilds coils of correct resistance for the claimed guage. The reel could do with a small magnet to stop it from unspooling while measuring off a length (not a show stopper though)
Reviewed on Was this review helpful to you? Yes / No

DomesticExtremist
Member

VERIFIED OWNER
  • JoinedJul 2017
  • Posts 2
  • Reviews 16
  • Kudos0
Overall   (3.7)
› Quality
› Value
PROS
Well machined Good colour on a red/black mod Good flavour
CONS
Lacquer on tank comes off AFC grub screw too short No spares
Tank is nice and gives good vapour and flaour. No spares, though not surprising at this price. Gold colour is nice for matching with mods, though not plated all the way to the bottom, so silver strip emerges when juice flow control is open. The laquer on the tank chips/wipes off during cleaning but now it has all gone it still looks OK overall. Better to order the one with clear glass in the first place. The AFC grub screw is too short so if screwed in too far can fall off the thread and rattle around inside the air inlet tube. Easily fixed but better to get a separate airflow tube that works correctly.
Reviewed on Was this review helpful to you? Yes / No