shopping cart empty
Cloudmann's Product Reviews
Sort:

Avatar
Cloudmann
Member

VERIFIED OWNER
  • JoinedMar 2015
  • Posts 31
  • Reviews 53
  • Kudos5
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Good build quality, FAST ramp up and ramp down. Accurate resistance. GREAT for vertical coils.
CONS
Not so good for most horizontal coil solutions. A little springy and delicate, but so are all notch coils.
Wow. I put one of these vertically in a Serpent Mini RTA (great RTA, btw) in a vertical configuration. The opposing lead positions allowed for that. The ramp up time is practically zero, vapor production is slightly improved, air flow is TREMENDOUS because of the 5mm inner diameter of these coils, and they produce flavor for days. Awesome!
Reviewed on Was this review helpful to you? Yes / No

Avatar
Cloudmann
Member

VERIFIED OWNER
  • JoinedMar 2015
  • Posts 31
  • Reviews 53
  • Kudos5
Overall   (4.7)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
It's PG and it's cheap
CONS
Cheaper in bulk
Good, clean PG at a decent price. Good stuff.
Reviewed on Was this review helpful to you? Yes / No

Avatar
Cloudmann
Member

VERIFIED OWNER
  • JoinedMar 2015
  • Posts 31
  • Reviews 53
  • Kudos5
Overall   (2.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Great vape... when it worked. Just as easy to use as the authentic
CONS
Build quality and quality control are horrible.
Short version, this (mine, anyhow) is an unsafe atomizer. Out of the box, I was a bit forgiving of standard clone build quality issues: the stock drip tip is loose (a replacement worked great) and the milling in the posts was a bit off center. Other than that, no major gripes... until 2 days into using it when it started shorting internally, reading a 0.8 build at 3.6 ohms and climbing. I troubleshot the coil, disassembled and reassembled the tank... no good... same thing. It has an internal short somewhere. Going straight into the recycling bin. It's just unsafe to use. Do yourself a favor and get the authentic versus this particular clone. Battery, atomizer, and mod safety are paramount and are too important to justify saving a couple of bucks on this POS and risk battery venting. No bueno.
Reviewed on Was this review helpful to you? Yes / No
Authentic MKWS 316 Stainless Steel Pre-Coiled Wires for RBA Atomizers (10-Pack)
Authentic MKWS 316 Stainless Steel Pre-Coiled Wires for RBA Atomizers (10-Pack)

Avatar
Cloudmann
Member

VERIFIED OWNER
  • JoinedMar 2015
  • Posts 31
  • Reviews 53
  • Kudos5
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Very consisten resistance. Easy to work with. Fairly cheap.
CONS
none
Awesome prebuilt claptons, here. Consistent (0.30 to 0.40 ohms) resistance values, great for temp control. Built a single coil, vertical in a Toptank Mini with the original Subtank Mini RBA Plus, rocking it on the VTC Mini in SS316 temp control at 500 degrees F, 55 watts... Simply awesome with GREAT temp control accuracy. Nothing wrong with these bad boys.
Reviewed on Was this review helpful to you? Yes / No

Avatar
Cloudmann
Member

VERIFIED OWNER
  • JoinedMar 2015
  • Posts 31
  • Reviews 53
  • Kudos5
Overall   (4.5)
› Quality
› Value
PROS
Great, great berry vape.
CONS
Nope.
Tons of strawberry up front with blueberry in the background. Maybe a touch of cherry.
Reviewed on Was this review helpful to you? Yes / No