shopping cart empty
ChiTown57's Product Reviews
Sort:
Authentic Smoant Battlestar Squonker 200W TC VV VW APV Box Mod Kit
Authentic Smoant Battlestar Squonker 200W TC VV VW APV Box Mod Kit

ChiTown57
Member

VERIFIED OWNER
  • JoinedJun 2014
  • Posts 91
  • Reviews 19
  • Kudos25
Overall   (4.2)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Nice shape and color Batteries easy to replace RDA is exceptional
CONS
Display too dim Squonk pump is lame and has no suck back Pump button has a hard edge that isn't comfy on the finger
Not great as a squonk mod due to the little windex bottle type squirt with no suck back. Takes 4 to 5 pumps to get the cotton wet again and the button is rough on the finger. Otherwise it's a great mod if you use it as a regular mod with a tank. RTA, RDTA or non-squonk RDA. Screen overlay is too dark so it's hard to see the display unless you are in a near dark room. Otherwise it's a great mod used as a standard mod, for the price it is now.
Reviewed on Was this review helpful to you? Yes / No
Authentic IJOY CAPO 100 100W TC VW APV Mod Kit (w/o Battery)
Authentic IJOY CAPO 100 100W TC VW APV Mod Kit (w/o Battery)

ChiTown57
Member

VERIFIED OWNER
  • JoinedJun 2014
  • Posts 91
  • Reviews 19
  • Kudos25
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
large fire button large display nice feel in the hand accomodates larger 25 or 26mm attys rainbow finish is well done
Have been using this with the 18650 adapter for 2 weeks then switch to 20700, both work equally well though the 20700 has a slightly longer run before needing a charge. I charge outside the mod so I cant comment on the USB charging. Durable well thought out mod. I have the squonk version of this with the triangle rda coming so hopefully it's as nice as this mod. + and - minus with the usb port make a cute little demon face too (lol)
Reviewed on Was this review helpful to you? Yes / No
Silicone Anti-slip Ring (10-Pack)
Silicone Anti-slip Ring (10-Pack)

ChiTown57
Member

VERIFIED OWNER
  • JoinedJun 2014
  • Posts 91
  • Reviews 19
  • Kudos25
Overall   (4.7)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
No logos or other printing Nearly clear Great for 23mm to 25mm tanks
CONS
Loose on 22mm glass
Very nice for fatter tanks, I put them on Gemini and Subtank glass and they are loose but fit nicely on my Griffin 25's, Subtank Plus v2 and Billow V3's. Fasttech needs more plain "anti slip" rings some in 18mm ID and more in the 22mm ID like this. Anyway no more need to sand off logos with a nail board or flip them inside out
Reviewed on Was this review helpful to you? Yes / No
Replacement Air Flow Control Valve Base for SUBTANK Mini V2 Clearomizer
Replacement Air Flow Control Valve Base for SUBTANK Mini V2 Clearomizer

ChiTown57
Member

VERIFIED OWNER
  • JoinedJun 2014
  • Posts 91
  • Reviews 19
  • Kudos25
Overall   (0.5)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Nice color
CONS
Bad threads No thread lock Positive pin too short Overall bad product
Ordered three, all three show no contact with RBA or coil, I had to put a dab of solder on the inside tip of the center contact pin to make a connection. Insulator is loose, pin slides out easily. No thread lock on thrads that hold the top and bottom together, had to put my own on. Threads to tank are the worst I have seen and pitch is too small so that the tank to base connection loosens and you get a major leak. I pitched them in my junk box to use for parts though the only usable parts are the pin, insulator and seal ring. Suggestion - buy the 2 hole replacement bases, these 4 holers dont give any more air and they are junk
Reviewed on Was this review helpful to you? Yes / No
Authentic R80 RBA Kit
Authentic R80 RBA Kit

ChiTown57
Member

VERIFIED OWNER
  • JoinedJun 2014
  • Posts 91
  • Reviews 19
  • Kudos25
Overall   (5.0)
› Quality
› Value
PROS
Air flow adjustment 510 build adapter Easy deck system Extra 4 screws and 2 o-rings
Anyone that has built the Kanger Subtank mini RBA will be right at home with this, the deck is almost identical but the top cover is slightly different (but easier). No oil or burrs, well built. I built this with my own SS316L wire, 26 awg, at 2.0mm and 7.5 wraps non-spaced. Came out to 0.30 ohms and dry burned nicely at 8 watts. Once wicked (easy too) and juiced I could go to 15 watts for test and once in the pod full of juice it works very well with 25W. I bought the R80 kit with the 510 adapter and that is useless as many Youtube reviews will even confirm. I did try one of my VooPoo PnP RBAs and while it worked, it;s way too tight for me being a long time direct lung vaper. The air flow wide open on this is perfect in the R80 pod. I have not tried it on my Vinci X pod yet but if it works physically I imagine it will make the Vinci X much better.
Reviewed on Was this review helpful to you? Yes / No