shopping cart empty
BamBam1017's Product Reviews
Sort:

Avatar
BamBam1017
Member

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 1760
  • Reviews 58
  • Kudos1711
Overall   (5.0)
› Quality
› Value
3 of 3 people found the following review helpful
PROS
Smooth threads Built well Properly aligned airhole Best single coil flavour EVER Fits with OG and pallas stumpy kit
CONS
No block tool No metal rod tool
The perfect rose clone, but it doesn't come with certain tools. This doesn't mean it can't be used properly but its trickier to get apart. This thing has a learning curve so if your just venturing into RBA's give this a miss. Once you get a good build in this its a flavour machine and hands down beats every other tank i've tried. Also chucks out the vapour. I have a single coil from 2 strands of 30gauge kanthal twisted together and coming in at 0.7ohms and wicked with cellucotton, with this set up the flavour is insane and I urge any experienced user to give it a go. Do yourself a favour if you got/get one and buy a stumpy kit. For the cost of 0.2ml capacity thanks to some sort of vape magic you shave off around 20mm of height, and the best bit - there is a noticable flavour improvement with the stumpy kit, maybe down to a shotened distance in the chimney or tighter drip tip i'm not sure, but its something i didn't ever notice with nano kits on my taifun or kayfun.
Reviewed on Was this review helpful to you? Yes / No

Avatar
BamBam1017
Member

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 1760
  • Reviews 58
  • Kudos1711
Overall   (2.2)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Glass Fits No leaks
CONS
Black comes off
Since my initial review of this recently the black paint or whatever it is started flaking where im guessing it got scratched. I used a brillopad and scrubbed off the rest so its just a normal glass section now, but it fits perfectly doesn't leak and costs next to nothing so who cares
Reviewed on Was this review helpful to you? Yes / No

Avatar
BamBam1017
Member

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 1760
  • Reviews 58
  • Kudos1711
Overall   (4.7)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Nice airflow, a lot wider range then prior KF's interchangable with original Superb flavour and vapour production Extra screws on the deck make building easier then ever before Amazing price Very nicely built, perfect logo's
CONS
Came coated in machine oil!
Only con was this came absolutely covered in machine oil and it took many cleans to get rid of it (see below for my method) For bang for buck this is right up their with the best gear FT offer! My first RBA was a KFL+V2 which i liked - until i tried the rose V2, erlkonigin and aqua V2, at which point it was neglected and eventually sold. This Tank is right up their with the best for me, the flavour production is not far off my rose V2 and the vapour production is brilliant for an RTA. It fits together with the OG (though the finish isn't quite as good as to be expected - though still very good), and the spring isn't flimsy like it looks in the pic, its silver plated copper and seems sturdy. All the o-rings on mine are fine but i purchased OG spares just in case. Juice control works perfectly, and the AFC while not ideal isn't an issue for me because i tend to find my preferred setting and just leave it there. The looks have grown on me too i've got it set up with the glass on my SX mini and looks the business. This ones definitely worth a go especially at the price, even if you found the prior KFs lacking in any way as for me this is a different vape contrary to what most people seem to say - just make sure you clean the oil off because it tastes RANK If you are getting leaks refer to the manual regarding how to fill and operate juice control properly, make sure the o-rings are ok, and make sure you're build and wick is done properly. 2 builds in this already and not a single leak, gurgle or dry hit (using 100% VG liquid) HOW I REMOVED MACHINE OIL 1) Remove all o-rings and place them in hot soapy water 2) Soak in oven degreaser and hot water until its luke warm 3) Scrub with toothbrush and rinse in hot water 4) Soak in vinegar and hot water for as long as you can wait (i left it for an hour) 5) Scrub again with toothbrush while in hot water 6) Soaked in most potent clear alcohol you can find before rinsing and another go with tooth brush 7) Soak in soapy hot water then rinse Seems long winded but this wasn't too long or difficult, but i kid you not a soapy water rinse will not cut it if yours comes as oily as mine!
Reviewed on Was this review helpful to you? Yes / No

Avatar
BamBam1017
Member

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 1760
  • Reviews 58
  • Kudos1711
Overall   (4.5)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Classy Nice size Smooth button Deep engraving Hits nicely
CONS
Glass (or whatever it is) bottom piece doesn't cover the whole switch, leaves about 1mm of space around the circumference. Doesn't have the same unique button as the OG
Other then the con which wont bother all but will bother petty people like me, this is a nice classy looking simple mod. Copper adjustable contacts, smooth button with a fairly short throw. Impulse buy, doesn't get used much, but if you like the look of the OG you'll be happy with this.
Reviewed on Was this review helpful to you? Yes / No

Avatar
BamBam1017
Member

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 1760
  • Reviews 58
  • Kudos1711
Overall   (4.2)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
nice build quality, perfectly finished precise afc with wide range from tight to open nice coils easy to use
CONS
none yet
Works very well, this is the first stock coil tank i've used since the first nautilus and aerotank mega and I have to say I am very impressed, I don't enjoy building coils as much as I used to and its great to see I can still get a very flavourful vape with lots of vapour without having to mess about with building anymore. Very happy
Reviewed on Was this review helpful to you? Yes / No