AuralVirus's Product Reviews
Sort:

Avatar
AuralVirus
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 5842
  • Reviews 137
  • Kudos3457
Overall   (5.0)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Well machined. Small compact chamber. Extremely light (titanium so yeah, it should be) Good airflow (not too big not too small) Fit's all battle decks, CCC decks & VO decks I own. Looks superb a top of the titanium Admiral (Broadside)
CONS
Due to its "Small compact chamber" & lack of drip tip option it can get too warm to vape but being made of titanium it cools very quickly.
An extremely well machined (in fact perfectly machined) attractive titanium top cap that looks superb a top of the titanium Admiral (Broadside) which fit's all "battle deck" sized decks such as SKU4866000 SKU6263800 SKU6261400 & SKU5951000, CCC decks SKU5832900 & VO decks SKU5297500 (I own those and thus can confirm.) If I could get this in brass, copper & a few colours I'd buy them as well. Would also be superb for an extremely lightweight set up with the 3d printed squonk boxes and such.
Reviewed on Was this review helpful to you? Yes / No
Paper Insulation Gasket for Flat 18650 Battery (100-Pack)
Paper Insulation Gasket for Flat 18650 Battery (100-Pack)

Avatar
AuralVirus
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 5842
  • Reviews 137
  • Kudos3457
Overall   (5.0)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Sticky back - so won't blow away when using hairdryer to shrink battery wrap (no burnt/hot fingers). Thick card-like material that is easily manipulated. Good price. Has three very important uses. 1/ the obvious as battery top protection. 2/ Use on the inside of hybrid top caps to prevent accidental short when rda is removed & button isn't locked off. 3/ Use between the rda base & hybrid top to preventthe rda base from get locked & (almost a 4th) prevent the hybrid top from being scratched.
a simple, easily over looked yet must have product. I will make a thread about the 4 points below uses with photo's in the week as everyone should be using these with mechs like the AV products, SCNDRL basically any hybrid mech mod that doesn't have insulation under the hybrid top. Three very important uses. 1/ the obvious as battery top hard short protection. 2/ Use on the inside of hybrid top caps to prevent accidental short when rda is removed & button isn't locked off. 3/ Use between the rda base & hybrid top to preventthe rda base from get locked. 4/ Will prevent the hybrid top from being being scratched when placed between rda &base and hybrid top and are far far cheaper than the washers being sold for the same purpose.
Reviewed on Was this review helpful to you? Yes / No

Avatar
AuralVirus
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 5842
  • Reviews 137
  • Kudos3457
Overall   (5.0)
› Quality
› Value
4 of 6 people found the following review helpful
PROS
Has laser etchings. Well machined. 510 protrudes (though not as much as in the pictures shown). Wide post holes that have been deburred in the factory and chamfered. Finish appears to be media blasted rather than polished(?) Fits Hubble 2, Modfather and AV Battle Cap & Haze inc Haze Dripper. see description for a list it didn't fit.
CONS
Has laser etchings.
Has laser etchings could be a pro or a con to you. Fits top caps with a thicker wall such as the Haze inc Haze Dripper. Does NOT fit Kennedy (I have 5 or 6 kennedy's, mini, comp, normal, glass & acrylic and none fitted), Petri, Twisted Messes (assume it doesn't fit any of Comp Vapes tops as they all use thin cheapo tubing sleeves), Velocity, phenotype L, big dripper, marquis, mutation x v2 or v4. airek, Tug boat nor fishbone glass, Mad Hatter mini.And of course not the derringer or stumpy.
Reviewed on Was this review helpful to you? Yes / No
Bagua Mechanical Mod
Bagua Mechanical Mod

Avatar
AuralVirus
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 5842
  • Reviews 137
  • Kudos3457
Overall   (4.2)
› Quality
› Value
3 of 4 people found the following review helpful
PROS
Quality threading, smooth as butter. Deep accurate engraving. Adjustable 510 pin. Convincing battery vent holes. Firm reverse locking ring. Top ring can be used to close gaps of rda's/tanks with non adjustable & too long 510 connectors. High quality finish. Smooth button action which never misfires.
CONS
Wish it came true 18650. Button does warm up a little, consider it a warning to stop using it until its cooled (2 mins or so.)
I love it. So much so I'm getting a collar made for 18650 mode. I can't fault it although I've yet to assess if there is any notable drop. Would look great with the new Turbo rda. If anyone knows of a matching tube please mention it in the discussion section as I've added a request for such.
Reviewed on Was this review helpful to you? Yes / No

Avatar
AuralVirus
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 5842
  • Reviews 137
  • Kudos3457
Overall   (4.2)
› Quality
› Value
3 of 4 people found the following review helpful
PROS
Instantly likeable and identifiable as a cappuccino imho.
CONS
Non
A good, strong, slightly bitter yet smooth coffee flavour with a non sickly hint of chocolate & no sugar, unfortunately for me, as I like a spoon of demerara sugar in my cappuccino and this would balance the coffee nicely. If I could change anything I'd add a little (more?) cream and sweetness (either demerara sugar flavour or even a hazelnut flavour (hmm gotta get some) to balance the welcome coffee bitterness. (its NOT a nasty bitterness its the right side of coffee bite/bitter).
Reviewed on Was this review helpful to you? Yes / No