Asylumsix's Product Reviews
Sort:

Avatar
Asylumsix
Verified

VERIFIED OWNER
  • JoinedNov 2015
  • Posts 487
  • Reviews 115
  • Kudos263
Overall   (1.2)
› Quality
› Value
PROS
It looks like it is supposed to.
CONS
Tastes burnt.
I bought this to go with an old ego style battery to give to a smoker friend (this is not my main vape)... Loaded it up with some 70pg/30vg 12mg juice, let it sit in a drawer for about 2-3 hours to wick up, after ample time to wick it immediately had a burnt flavor to it, don't feel comfortable giving that to someone as their first vaping experience, in the trash it goes not worth an rma...
Reviewed on
LTQ Vaper Japanese Organic Cotton for RDA RTA RBA Atomizers (10-Piece Set)
LTQ Vaper Japanese Organic Cotton for RDA RTA RBA Atomizers (10-Piece Set)

Avatar
Asylumsix
Verified

VERIFIED OWNER
  • JoinedNov 2015
  • Posts 487
  • Reviews 115
  • Kudos263
Overall   (5.0)
› Quality
› Value
PROS
Fluffy.
Good cotton, wicks well, strands were smaller than my previous pads.
Reviewed on
UD 316L Stainless Steel Resistance Wire for Rebuildable Atomizers
UD 316L Stainless Steel Resistance Wire for Rebuildable Atomizers

Avatar
Asylumsix
Verified

VERIFIED OWNER
  • JoinedNov 2015
  • Posts 487
  • Reviews 115
  • Kudos263
Overall   (5.0)
› Quality
› Value
PROS
Lower Resistance Bigger coils (more surface area)
CONS
A little springy, after I wrap a twisted coil it will spring back a little, I insert it into my velocity and pulse it a couple times and the springiness comes out and I can tighten it up from there, no issues after pulsing it, I guess a low temp torch would work just as well.
I've pretty much been using kanthal since I started vaping, I've tried Ni200 and TI as well and didn't like either of those whatsoever so I had given up on temperature control until I found this :) !! My biggest problem with kanthal is when I made larger coils the resistance would get too high and this has solved all those problems and allows me to use it in temp control which is a bonus. Current build is a 8 wrap 26g tight twisted dual coil wrapped on a 1/8th screwdriver ohming out at 0.298, with kanthal the same build would ohm out much higher and I wouldn't get as warm of a vape as I like so I was resorting to smaller builds with less surface area. Flavor is very very similar to kanthal but there is subtle differences. I highly recommend this product, I will be placing another order in two weeks for some more!!
Reviewed on
UD Kanthal A1 Heating Wire for Rebuildable Atomizers
UD Kanthal A1 Heating Wire for Rebuildable Atomizers

Avatar
Asylumsix
Verified

VERIFIED OWNER
  • JoinedNov 2015
  • Posts 487
  • Reviews 115
  • Kudos263
Overall   (5.0)
› Quality
› Value
PROS
No machine oil No smell It was what it was supposed to be.
CONS
None!
Great wire, used it for 26/32 Claptons, Twisted 26g, microcoil and a simple spaced coil and they all perform excellently! Going to have to order more! Highly recommend it, UD rocks!!
Reviewed on

Avatar
Asylumsix
Verified

VERIFIED OWNER
  • JoinedNov 2015
  • Posts 487
  • Reviews 115
  • Kudos263
Overall   (4.7)
› Quality
› Value
PROS
Good build quality. Nice size post holes for larger builds. Nice mat black with a bit of Sheen (not charlie).
CONS
Rubber seals could be a tiny bit bigger, it sometimes leaks since they are so loose. Drip tip adapter bore too large.
Decided to take my time writing this review really wanted to go through a few builds first, I love it and have been using it almost exclusively since I got it, I've tried a few builds on it, from microcoils to spaced to claptons to twisted. I've settled in with a dual coil tight twisted 26g X2 setup @.29 ohms on a Koopor Plus at around 60 watts, the RDA performs excellently, flavor is just about perfect. As for the drip tip adapter, I never planned on using it but I gave it a try, I have about 4 drip tips and they were all very loose and would fall out.... Knocked 1 star off build quality because O-rings were loose, I tried some others I have but they were too big. Highly recommend it!
Reviewed on